TRIBEWOOD Farmhouse Wood Coffee Table Instruction Manual

1. Important Safety Information

WARNING: This product requires assembly. Always follow the included assembly instructions for safe and proper installation. Do not exceed the maximum weight recommendation of 110 pounds (50 kg) to ensure stability and prevent accidents.

• Keep all small parts and packaging materials away from children and pets.
• Ensure all connections are secure before use. Periodically check and re-tighten fasteners as needed.
• Do not stand or sit on the table.
• Place the table on a level surface to prevent tipping.

2. Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact TRIBEWOOD customer support.

• Fir Wood Tabletop (1)
• Fir Wood Lower Shelf (1)
• Metal Legs (4)
• Assembly Hardware (bolts, washers, Allen wrench)
• Assembly Guide (1)

3. Setup and Assembly

Assembly is straightforward and requires minimal tools. An assembly guide and all necessary hardware are included.

1. Unpack all components and lay them out on a soft, clean surface to prevent scratches.
2. Attach the metal legs to the underside of the tabletop using the provided bolts and Allen wrench. Do not fully tighten the bolts at this stage.
3. Position the lower shelf between the metal legs at the designated height. Secure it to the legs using the remaining bolts. Again, do not fully tighten.
4. Once all components are loosely attached, place the table upright on a level surface.
5. Systematically tighten all bolts until secure. Avoid over-tightening.

Figure 3.1: Assembled coffee table with its two tiers and metal legs.

Periodically check all fasteners and re-tighten if necessary to maintain stability.

4. Operating Instructions

The TRIBEWOOD Farmhouse Wood Coffee Table is designed for residential indoor use as a central accent piece in living rooms, lounges, or family rooms.

• Placement: Position the table on a flat, stable floor. Avoid placing it in direct sunlight or near heat sources to prevent wood damage.
• Storage: Utilize the large upper tabletop (47.24" W x 23.62" D) for drinks, decorative items, or electronic devices. The lower shelf (44.1" W x 16.93" D) provides additional space for books, magazines, or storage baskets, helping to keep your space organized.
• Weight Capacity: Do not exceed the maximum weight recommendation of 110 pounds (50 kg) distributed evenly across both surfaces.

Figure 4.1: Coffee table in a living room setting, showcasing its functional design.

5. Maintenance and Care

Proper care will help maintain the appearance and longevity of your coffee table.

• Cleaning: Wipe the fir wood surfaces and metal legs with a dry or slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, which can damage the finish.
• Stain Resistance: The fir wood is not stain resistant. Promptly clean up spills to prevent staining. Use coasters under drinks and placemats under hot items.
• Wood Care: Wood is a natural material that can react to environmental changes. Maintain a stable room temperature and humidity level to minimize the risk of warping or cracking. Avoid prolonged exposure to direct sunlight.
• Metal Legs: The metal legs are robust and require minimal maintenance. Wipe clean as needed.

6. Troubleshooting

This section addresses common issues you might encounter.

6.1. Table is Wobbly

• Check Fasteners: Ensure all bolts connecting the legs to the tabletop and lower shelf are fully tightened.
• Level Surface: Verify that the table is placed on a completely level floor. Adjust the table's position if necessary.

6.2. Wood Surface Cracking or Splitting

Wood is a natural material and can be sensitive to environmental conditions.

• Humidity Control: Extreme changes in humidity (very dry or very humid environments) can cause wood to expand or contract, leading to cracks. Maintain a consistent indoor humidity level, ideally between 35-55%.
• Temperature: Avoid placing the table near direct heat sources like radiators, fireplaces, or in direct, prolonged sunlight, which can dry out the wood.
• Weight Distribution: Ensure weight is distributed evenly and the maximum weight capacity is not exceeded.

7. Specifications

Figure 7.1: Detailed dimensions of the coffee table.

8. Warranty and Support

For specific warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. For product support, inquiries, or to report missing/damaged parts, please contact TRIBEWOOD customer service directly.

Please have your model number (24YA-FU3MOON7) and purchase details ready when contacting support.