DJI Avata 360 Charging Hub User Manual

1. Introduction

This manual provides essential information for the safe and efficient use of your DJI Avata 360 Charging Hub. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage or injury. Keep this manual for future reference.

The DJI Avata 360 Charging Hub is designed to charge up to three DJI Avata 360 Intelligent Flight Batteries simultaneously or sequentially, depending on the power input.

2. Safety Information

Use only compatible DJI Avata 360 Intelligent Flight Batteries with this charging hub.
Ensure the charging hub is connected to a compatible power adapter (DJI 65W Portable Charger or DJI 100W USB-C Power Adapter recommended) with an input of 65W or higher for parallel charging.
Do not expose the charging hub to water or moisture.
Do not disassemble, modify, or attempt to repair the charging hub yourself. Contact DJI support for service.
Keep the charging hub away from heat sources and direct sunlight.
Always supervise the charging process.
Keep out of reach of children.

3. Package Contents

Verify that all items are included in your package:

DJI Avata 360 Charging Hub × 1

Note: The power adapter/charger is not included and must be purchased separately.

4. Product Overview

The DJI Avata 360 Charging Hub features multiple battery slots and a power input port for efficient charging.

Angled view of the DJI Avata 360 Charging Hub, showing three battery slots and the USB-C input port.

Figure 1: Angled view of the DJI Avata 360 Charging Hub. This image displays the hub's overall design, including the three distinct slots for batteries and the USB-C power input port located at the base.

Side view of the DJI Avata 360 Charging Hub, highlighting the USB-C input and power button.

Figure 2: Side view of the charging hub. This perspective clearly shows the USB-C input port and the power button, which are essential for connecting the power source and initiating charging.

Top-down view of the DJI Avata 360 Charging Hub, showing the three empty battery slots.

Figure 3: Top-down view of the charging hub. This image illustrates the three empty slots where DJI Avata 360 Intelligent Flight Batteries are inserted for charging.

DJI Avata 360 Charging Hub with three batteries inserted and connected to a charging cable.

Figure 4: Charging hub with batteries inserted. This image demonstrates the charging hub in use, with three DJI Avata 360 Intelligent Flight Batteries securely placed in their slots and the charging cable connected to the hub's input port.

5. Setup

Connect Power Adapter: Connect a compatible USB-C power adapter (e.g., DJI 65W Portable Charger or DJI 100W USB-C Power Adapter) to the USB-C input port on the charging hub.
Plug into Power Outlet: Plug the power adapter into a wall outlet.
Insert Batteries: Insert up to three DJI Avata 360 Intelligent Flight Batteries into the designated slots on the charging hub. Ensure they are securely seated.

6. Operating Instructions

6.1 Charging Process

Once batteries are inserted and the hub is connected to a power source, the charging process will begin automatically. The LED indicators on the batteries will show their charging status.

6.2 Parallel vs. Sequential Charging

Parallel Charging: If the charging hub is connected to a power adapter with an input of 65W or higher (e.g., DJI 65W Portable Charger or DJI 100W USB-C Power Adapter), the hub will support parallel charging. This means all inserted batteries will charge simultaneously.
Sequential Charging: If the power input is less than 65W, the hub will charge batteries sequentially. In this mode, the hub prioritizes charging the battery with the highest remaining power level first, then proceeds to the next highest, and so on, until all batteries are fully charged.

6.3 Checking Battery Status

Refer to the LED indicators on each DJI Avata 360 Intelligent Flight Battery to check its current charge level and charging status.

7. Maintenance

Cleaning: Use a soft, dry cloth to clean the surface of the charging hub. Do not use liquid cleaners or solvents.
Storage: Store the charging hub in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
Inspection: Regularly inspect the charging hub and its ports for any signs of damage or wear.

8. Troubleshooting

Problem	Possible Cause	Solution
Batteries are not charging.	Power adapter not connected or faulty. Batteries not properly inserted. Incompatible power adapter.	Ensure the power adapter is securely connected and functioning. Re-insert batteries firmly into their slots. Use a compatible DJI power adapter.
Charging is slow or sequential despite multiple batteries.	Power adapter output is less than 65W.	Use a DJI 65W Portable Charger or DJI 100W USB-C Power Adapter for parallel charging.
Hub feels warm during charging.	Normal operation during charging.	Ensure adequate ventilation around the hub. If overheating is excessive, disconnect and contact support.

9. Specifications

Feature	Detail
Brand	DJI
Model Number	6937224137479
Color	Grey
Product Dimensions (D x W x H)	4.13" x 4.57" x 1.97"
Item Weight	151 g
Input Voltage	20 V
Output Voltage	17.2 V DC
Current Rating	3 A
Amperage	5 A
Compatible Devices	DJI Avata 360 Intelligent Flight Battery
Connector Type	DJI Proprietary Connector (USB-C for input)
Number of Ports	3 (for batteries)
Certifications	UL, FCC
UPC	190021162952

10. Warranty Information

The DJI Avata 360 Charging Hub comes with a 2-Year Manufacturer Warranty. For detailed warranty terms and conditions, please refer to the official DJI website or contact DJI customer support.

11. Support

For technical support, troubleshooting assistance, or service inquiries, please visit the official DJI website or contact their customer service department.

DJI Official Website: www.dji.com

You can also refer to the product page on Amazon for additional information: Amazon Product Page

DJI 6937224137479