EZVALO WL02 Cordless Wall Bracket Light User Manual

1. Introduction

Thank you for purchasing the EZVALO WL02 Cordless Wall Bracket Light. This manual provides important information regarding the installation, operation, and maintenance of your new light. Please read this manual thoroughly before use and retain it for future reference.

2. Safety Information

• Do not expose the device to extreme temperatures or humidity.
• Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel.
• Keep out of reach of children.
• Use only the specified charging method.
• Ensure the installation surface is clean and dry before applying adhesive.

3. Package Contents

Verify that all components are present:

• EZVALO WL02 Light Unit (Main Body)
• Magnetic Base / Stand
• Nano Adhesive Pad
• Mounting Screws (for optional screw installation)
• USB Charging Cable
• Remote Control
• User Manual (this document)

4. Product Overview

4.1 Components

Familiarize yourself with the parts of your EZVALO WL02 light.

Figure 1: Product Components. This image illustrates the main parts of the EZVALO WL02 light, including the operation button, charging port, the lamp body and screen, the magnetic iron ball, the strong magnet within the stand, and the nano adhesive for mounting.

• Lamp Body: The main light unit.
• Lamp Screen: The light-emitting surface.
• Operation Button: For touch control.
• Charging Port: USB port for recharging the internal battery.
• Magnetic Ball Joint: Allows 360° rotation of the light.
• Magnetic Stand: Base for mounting the light.
• Nano Adhesive: For non-damaging wall installation.

4.2 Key Features

• 360° Rotation: Adjust the light direction freely.
• 3 Color Temperatures: Switch between 3000K (warm white), 4500K (natural white), and 6500K (cool white).
• Stepless Dimming: Adjust brightness from 10% to 100%.
• Cordless & Rechargeable: Built-in 2000mAh battery for portable use.
• Dual Control: Operate via touch sensor or remote control.
• Timer Function: Set automatic shut-off.
• Eye Protection: Designed for comfortable illumination.
• Easy Installation: Two-way mounting options (adhesive or screws).

5. Installation

The EZVALO WL02 offers two installation methods: adhesive mounting or screw mounting.

5.1 Adhesive Mounting (Damage-Free)

1. Clean the desired installation surface thoroughly to ensure it is dry and free of dust or grease.
2. Peel off the protective film from the nano adhesive pad on the back of the magnetic stand.
3. Firmly press the magnetic stand onto the cleaned surface for at least 30 seconds. Allow the adhesive to set for 24 hours before attaching the light unit.
4. Once the stand is secure, magnetically attach the light unit to the ball joint on the stand.

Figure 2: Two-Way Installation. This image demonstrates both the nano adhesive method (left) and the screw mounting method (right) for attaching the magnetic stand to a surface. The nano adhesive is suitable for various wall types.

5.2 Screw Mounting (Permanent)

1. Choose the desired location for installation.
2. Use the magnetic stand as a template to mark the screw holes on the wall.
3. Drill pilot holes if necessary, then secure the magnetic stand to the wall using the provided screws.
4. Magnetically attach the light unit to the ball joint on the stand.

After installation, you can freely rotate the light unit 360° to direct the illumination as needed.

Figure 3: 360° Rotation and Usage Examples. This image highlights the 360-degree rotational capability of the light and illustrates its versatility in various settings such as a bedroom, for reading, as an accent light, or inside a closet.

6. Operating Instructions

The EZVALO WL02 can be controlled via its touch sensor or the included remote control.

6.1 Touch Control

• Single Tap: Cycles through ON / 3 Color Temperatures (3000K, 4500K, 6500K) / OFF.
• Long Press: Adjusts brightness (stepless dimming from 10% to 100%).
• Double Tap: Turns the light OFF and activates the memory function, which recalls the last brightness and color temperature setting when turned ON again.

Figure 4: Remote and Touch Controls. This image details the functions of both the remote control and the touch sensor on the light unit, explaining how to adjust brightness, color temperature, and use the timer.

6.2 Remote Control

The remote control provides convenient access to all light functions.

• ON/OFF Button: Turns the light on or off.
• Color Temperature Buttons: Switch between 3000K, 4500K, and 6500K.
• Brightness Adjustment Buttons (+/-): Increase or decrease brightness.
• Timer Buttons (10min, 30min, 60min): Set the light to automatically turn off after the selected duration.

Figure 5: Color Temperature and Dimming. This image illustrates the three available color temperatures (warm, natural, cool white) and the stepless dimming capability of the EZVALO WL02 light, ranging from 10% to 100% brightness.

6.3 Charging the Light

When the battery is low, connect the provided USB charging cable to the charging port on the light unit and a suitable USB power adapter (not included). The indicator light will show charging status.

Figure 6: Versatile Application. This image showcases the EZVALO WL02 light installed in different areas of a home, such as illuminating a staircase, providing ambient light in a bedroom, and accentuating a living room space.

7. Maintenance

• Clean the light unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the charging port is free of dust and debris.
• Periodically check the adhesive or screws for secure mounting.

8. Troubleshooting

9. Specifications

10. Warranty and Support

EZVALO products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EZVALO website. Please retain your proof of purchase for warranty claims.