Introduction
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Coleman SaluSpa Hawaii Inflatable Hot Tub. Please read all instructions carefully before installation and use. Keep this manual for future reference.
Image: The Coleman SaluSpa Hawaii Inflatable Hot Tub, shown in a backyard with four individuals relaxing in the water.
Safety Information
Always follow basic safety precautions when installing and using this electrical appliance. Failure to follow these instructions can result in serious injury or death.
- Do not permit children to use this hot tub unless they are closely supervised at all times.
- Do not use the hot tub if the water temperature exceeds 104°F (40°C).
- Consult a doctor before use if you are pregnant, have heart disease, high blood pressure, diabetes, or any other health condition.
- Avoid using the hot tub immediately after a heavy meal or under the influence of alcohol or drugs.
- Ensure the hot tub is placed on a flat, level surface capable of supporting its full weight when filled.
- Always use the provided cover when the hot tub is not in use to prevent accidental drowning and heat loss.
Package Contents
Verify that all components listed below are included in your package:
- Inflatable Hot Tub Liner
- Heater Pump Unit
- EnergySense Cover
- Type VI Filter Cartridge
- ChemConnect Chemical Dispenser
- Repair Patch
Image: Visual representation of the included components: Heater Pump, ChemConnect Dispenser, Type VI Filter Cartridge, and EnergySense Cover.
Setup
- Site Selection: Choose a flat, stable, and level surface free from sharp objects. Ensure adequate drainage and proximity to a grounded electrical outlet.
- Inflation: Connect the heater pump unit to the hot tub liner. Use the pump's inflation function to inflate the hot tub walls until firm. The heater pump inflates the hot tub in approximately 5 minutes.
- Filling: Fill the hot tub with water to the recommended level, typically between the minimum and maximum fill lines indicated on the interior.
- Initial Power-Up: Connect the heater pump to a grounded electrical outlet. The digital control panel will illuminate.
Image: Dimensions of the hot tub, including outer and inner length, and height, along with key features like capacity, max temperature, and power-saving timer.
Image: The hot tub's EnergySense insulation and integrated cup holders for convenience.
Operating the Hot Tub
Digital Control Panel
The easy-to-reach digital control panel allows you to manage various functions:
- Temperature Control: Set your desired water temperature up to 104°F (40°C).
- Massage System: Activate the 140 AirJets for a soothing bubble massage.
- Filter System: Turn on the filtration system to circulate and clean the water.
- Power-Saving Timer: Program the hot tub to heat up to 40 days in advance.
Bestway Connect App
Control your hot tub remotely using the Bestway Connect app on your smartphone. The app allows you to adjust temperature, set timers, manage the filter, and activate the massage system from anywhere.
Image: The digital control panel and the Bestway Connect app on a smartphone, illustrating remote control capabilities.
Image: A diagram showing the AirJet Massage System with 140 bubble jets providing a calming massage.
Maintenance
- Water Treatment: Use the ChemConnect dispenser to maintain clean and clear water by evenly dispersing the proper amount of chlorine. Regularly test water chemistry and adjust as needed.
- Filter Cartridge: Clean the filter cartridge regularly and replace it every few weeks, depending on usage, to ensure optimal filtration performance.
- Cover Usage: Always use the EnergySense cover when the hot tub is not in use. The insulated walls and cover are up to 40% more energy-efficient in retaining heat.
- Winterization (Freeze Shield): The hot tub features a Freeze Shield automatic heating function that protects the pump and liner from damage due to cold weather. Follow specific instructions in the full manual for proper winter storage if temperatures drop significantly below freezing for extended periods.
Image: A diagram demonstrating the EnergySense insulated cover and liner, which helps retain heat and improve energy efficiency.
Image: The hot tub in a snowy environment, illustrating the Freeze Shield automatic heating function that protects against cold weather.
Troubleshooting
If you encounter any issues with your hot tub, refer to the following common troubleshooting tips:
- No Power: Check the power connection and ensure the GFCI plug is reset.
- Water Not Heating: Verify the desired temperature setting. Ensure the filter is clean and water level is adequate.
- Error Codes: Consult the full product manual for a list of error codes and their corresponding solutions.
- Air Leak: Use the provided repair patch for minor punctures. For significant leaks, contact customer support.
Specifications
| Feature | Specification |
|---|---|
| Model | Hawaii Energy Efficient 2.0 |
| Dimensions (L x W x H) | 71" x 71" x 28" |
| Seating Capacity | 4 to 6 Persons |
| Water Capacity | 222 Gallons |
| Number of AirJets | 140 |
| Max. Heat Temperature | 104°F (40°C) |
| Material | Polyester (Tritech outer layer, MaxHold internal beams) |
| Energy Efficiency | Up to 40% more efficient with EnergySense insulation |
Image: A close-up view highlighting the MaxHold fabric internal beams, which provide superior air pressure retention and stability.
Official Product Video
Video: An official product video from Spreetail showcasing the Coleman Hawaii Energy-Efficient Inflatable Hot Tub, demonstrating its features and ease of use.
Warranty and Support
Your Coleman SaluSpa Hawaii Inflatable Hot Tub is covered by a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, replacement parts, or further assistance, please contact Coleman customer service or visit their official website. Keep your purchase receipt as proof of purchase for warranty claims.
