BLOKEES Marvel Deadpool & Wolverine Champion Class 04 Deadpool Model Kit

1. Introduction

This instruction manual provides detailed guidance for assembling and understanding the features of your BLOKEES Marvel Deadpool & Wolverine Champion Class 04 Deadpool Model Kit. This highly articulated figure is designed for dynamic posing and display, featuring movie-accurate details and a tool-free snap-fit assembly process.

2. Safety Information

WARNING: CHOKING HAZARD – Small parts. Not for children under 3 years.

Recommended Age: 14+

Always keep small parts away from young children. Adult supervision is recommended during assembly.

3. Package Contents

Please verify that all components are present before beginning assembly:

• Deadpool Model Kit x 1 (comprising 90 pre-painted, tool-free snap parts)
• Weapon Accessories (Two Samurai Swords, One Tactical Dagger)
• Interchangeable Hands ×3 Sets
• Head Sculpt x 2 (Dual interchangeable head sculpts)
• Instruction Booklet x 1

Image: All model kit parts organized on their respective sprues, ready for assembly.

Image: A detailed view of various separated and pre-painted parts, including head components, torso pieces, and joint connectors.

4. Assembly Instructions

This model kit features tool-free snap-fit assembly. No glue, paint, or cutters are required. Follow the step-by-step diagrams in the included Instruction Booklet for precise assembly.

4.1 General Assembly Tips:

• Identify each part by its corresponding letter and number on the sprue before detaching.
• Gently twist or snap parts from the sprues. Avoid excessive force to prevent breakage.
• Ensure parts are aligned correctly before snapping them together. A firm, even pressure is usually sufficient.
• Refer to the Instruction Booklet for detailed diagrams for each section (head, torso, limbs, etc.).

4.2 Attaching Interchangeable Parts:

The kit includes dual head sculpts and three sets of interchangeable hands. These can be swapped out to customize your figure's appearance and pose.

• To change a head sculpt, gently pull the current head straight up from the neck joint. Align the desired head sculpt with the neck joint and push down firmly until it clicks into place.
• To change hands, gently pull the current hand straight out from the wrist joint. Align the desired hand with the wrist joint and push firmly until it is securely attached.

5. Features and Articulation

Your Deadpool model kit boasts 37 points of articulation, allowing for a wide range of dynamic poses. The figure stands approximately 13.4 cm (5.3 inches) tall.

5.1 Articulation Points:

• Head: Ball joint for rotation and tilt.
• Shoulders: Ball joints with butterfly articulation for extensive movement.
• Biceps: Swivel joint.
• Elbows: Double-jointed for deep bends.
• Wrists: Swivel and hinge joints.
• Torso: Abdominal crunch and waist swivel.
• Hips: Ball joints with drop-down mechanism for increased range.
• Thighs: Swivel joint.
• Knees: Double-jointed for deep bends.
• Ankles: Hinge and rocker joints for stability and dynamic foot placement.

Image: A visual guide highlighting the various articulation points and their range of motion on the Deadpool figure.

5.2 Accessories:

The figure comes with a signature loadout to enhance playability and display options:

• Two Samurai Swords: Can be held in the figure's hands or sheathed on the back.
• One Tactical Dagger: Can be held in hand.
• Interchangeable Hands: Various hand poses for holding weapons or expressive gestures.
• Interchangeable Head Sculpts: Two distinct head sculpts to vary the figure's expression.

Image: The Deadpool figure showcasing its two samurai swords, tactical dagger, and two distinct head sculpts.

Image: The fully assembled Deadpool figure in a dynamic action pose, wielding both samurai swords, demonstrating its articulation and accessory integration.

6. Care and Maintenance

To ensure the longevity and appearance of your Deadpool model kit, follow these care guidelines:

• Cleaning: Wipe the figure gently with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the paint or plastic.
• Storage: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation.
• Handling: When posing or changing parts, apply gentle, even pressure. Avoid forcing joints or parts, which could lead to breakage.

7. Troubleshooting

If you encounter any issues during assembly or with the figure's functionality, consider the following:

• Loose Joints: If a joint feels too loose, a small amount of clear nail polish or a similar clear coating can be applied to the ball joint and allowed to dry to increase friction.
• Tight Joints: If a joint is too tight, carefully apply a small amount of silicone shock oil or a similar lubricant to the joint. Gently work the joint back and forth to distribute the lubricant.
• Parts Not Fitting: Double-check the instruction booklet to ensure you are using the correct parts and aligning them properly. Sometimes, a slight adjustment in angle or pressure is needed for snap-fit parts.
• Missing/Damaged Parts: If you find any missing or damaged parts upon unboxing, please contact BLOKEES customer support for assistance.

8. Specifications

9. Support

For further assistance, product inquiries, or to report missing/damaged parts, please visit the official BLOKEES website or contact their customer support directly.

BLOKEES Store: https://www.amazon.com/stores/BLOKEES/page/EA20F114-EAF0-4B1D-813D-E20F04E85B0B