HUPEJOS V8 Ultra 5-Channel AI Dash Cam

1. Introduction

Thank you for choosing the HUPEJOS V8 Ultra 5-Channel AI Dash Cam. This advanced dash camera system is designed to provide comprehensive surveillance for your vehicle, featuring 5 independent cameras, AI-powered driver monitoring, STARVIS 2 sensor technology, built-in 5GHz WiFi, GPS, and 24/7 parking mode. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and safety.

2. Package Contents

Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

• 1 x V8 Ultra Dash Cam
• 1 x 1080P 2-CH Rear Camera
• 1 x Type-C Power Cable
• 1 x 19.6ft Rear Camera Cable
• 1 x 128GB SD Card
• 1 x CPL Filter
• 1 x 3M Adhesive Mount
• 1 x Car Wire Trim Tool
• 1 x User Manual
• 2 x Electrostatic Sticker

Image: Contents of the HUPEJOS V8 Ultra package, including the dash cam, rear camera, cables, SD card, CPL filter, mount, and tools.

3. Product Features

• 3.1. 5-Channel Recording System

  The V8 Ultra features five independent cameras providing a 360° view around and within your vehicle. The front camera records in 4K UHD, while the cabin, rear seats, sides, and rear cameras capture in crisp HD. This multi-camera setup ensures comprehensive coverage for all driving scenarios.

  

  Image: Visual representation of the 5-channel recording system, detailing the coverage areas of each camera.

• 3.2. AI Driver Monitoring System (DMS)

  An integrated AI co-pilot monitors the driver for signs of fatigue (e.g., yawning) and distraction (e.g., phone use). The system provides alerts to help maintain driver focus, enhancing safety during long journeys or night shifts.

  

  Image: A driver being monitored by the AI DMS, with icons indicating detection of eyes closing, yawning, distraction, and other behaviors.

• 3.3. STARVIS 2 & Super Night Vision with WDR

  Equipped with a STARVIS 2 sensor and Wide Dynamic Range (WDR) technology, the dash cam captures clear, detailed footage day and night. Twelve enhanced IR lights and a premium 6-glass lens ensure critical details like license plates are visible even in challenging low-light conditions.

  

  Image: Demonstrates the effectiveness of Super Night Vision and WDR technology in capturing clear images in bright, WDR, and dark conditions.

• 3.4. CPL Filter

  The included CPL (Circular Polarizing Lens) filter reduces glare from the windshield and road, boosts color saturation, and enhances overall image clarity, especially in bright conditions.

  

  Image: Shows the visual difference in recording quality with and without the CPL filter, highlighting reduced glare.

• 3.5. Built-in 5GHz WiFi & GPS

  Connect to the dash cam via fast 5GHz Wi-Fi using the dedicated smartphone app (iOS/Android) for live viewing, instant downloads, and easy sharing of footage. Built-in GPS automatically logs your route, speed, and location, providing verifiable evidence for insurance claims and trip playback on Google Maps.

  

  Image: Demonstrates the smartphone app interface for managing videos via 5GHz WiFi.

  

  Image: A car driving on a winding road with GPS pins indicating route tracking.

• 3.6. G-Sensor & Loop Recording

  The built-in G-Sensor automatically detects collisions and impacts, locking the current video footage into a protected "Event" folder to prevent overwriting. Loop recording ensures continuous recording by overwriting the oldest unlocked files when the SD card is full.

  

  Image: Two individuals inspecting car damage, with a G-Sensor icon indicating automatic event recording.

  

  Image: Visual representation of loop recording, showing video segments and a locked file icon, along with supported SD card sizes.

• 3.7. 24/7 Parking Mode

  When hardwired (kit sold separately, ASIN: B0F5Q5N8XC for Radar Detection or B0BLMRPNQT for Collision Detection), the dash cam provides continuous surveillance. Choose between Motion and Collision Detection (requires Radar Hardwire Kit) or Collision Detection Only (requires standard Hardwire Kit) to protect your vehicle while parked.

  

  Image: Illustrates the two parking modes: Motion and Collision Detection (with radar) and Collision Detection Only, showing scenarios where they activate.

• 3.8. Voice Control

  Operate your dash cam safely and hands-free using simple English voice commands such as "Take a photo," "Start recording," or "Turn off audio." This minimizes distraction and allows for quick capture of events.

  

  Image: A driver operating the dash cam using voice commands, with speech bubbles indicating various commands.

4. Setup and Installation

Proper installation is crucial for optimal performance. Please follow these steps carefully. It is recommended to test the camera before final installation.

1. Prepare the Windshield: Wipe the preinstalled location on the front windshield with a clean cloth. Transfer the electrostatic sticker to the correct position, ensuring no air bubbles. It is recommended to install the camera after standing still for half an hour to make the static stickers stronger.
2. Attach the Dash Cam: Attach the 3M bracket to the device. Peel off the protective film and stick it onto the electrostatic sticker, pressing firmly. Use the included car wire trim tool to run the power cable along the front windshield and A-pillar, hiding the cable to avoid blocking the driver's sight.
3. Prepare Rear Windshield: Wipe the preinstalled location on the rear windshield inside the vehicle with a clean cloth. Transfer the electrostatic sticker to the correct position.
4. Mount the Rear Camera: Mount the rear camera on the rear windshield. Insert the power cord along the gaps between the front windshield and the ceiling, between the body and the ceiling on the passenger seat side, and between the rear seat and the ceiling. (Note: The rear camera is not waterproof; please install it inside the car.)
5. Connect Power: Connect the Type-C power cable to the dash cam and the car charger to your vehicle's power outlet.

Image: Detailed visual instructions for installing the main dash cam unit and the rear camera, including cable routing.

5. Operating Instructions

5.1. Power On/Off

The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on. It will power off automatically when the ignition is turned off.

5.2. Recording Modes

The V8 Ultra supports continuous loop recording. In the event of a collision, the G-Sensor will automatically lock the current footage. You can also manually lock footage or take photos using voice commands or the app.

5.3. Voice Commands

To activate voice control, simply speak the command clearly. Supported commands include:

• "Take a photo"
• "Start recording"
• "Video stop"
• "Turn off audio"
• "Turn on WiFi"
• "Show front camera"
• "Turn on screen"

5.4. Smartphone App Control

Download the dedicated HUPEJOS app from your smartphone's app store. Connect to the dash cam's 5GHz Wi-Fi network to access live view, review recorded videos, download files to your phone, and adjust settings. The Wi-Fi range is typically 6-7 meters from the dash cam.

Image: Screenshots of the smartphone app showing video playback, file management, and sharing options.

5.5. GPS Tracking and Playback

The built-in GPS records your driving tracks, speed, and location. You can view this data on Google Maps via the smartphone app or by using the free GXPlayer software on your PC (Windows and Mac). For Mac, search "GXPlayer" in the App Store. For Windows, the GXPlayer installation file can be found on the memory card used in the dash cam.

Image: Displays GPS tracking functionality, showing a route on a map accessible via smartphone and laptop.

6. Maintenance

6.1. SD Card Management

• Formatting: Regularly format the SD card (at least once a month) through the dash cam's settings to ensure optimal performance and prevent data corruption.
• Replacement: Use high-endurance Class 10, U3 (or higher) microSD cards. The V8 Ultra supports up to 512GB. Replace the SD card if you notice recording errors or degraded performance.

6.2. Cleaning

• Lenses: Gently clean the camera lenses with a soft, lint-free cloth. Avoid abrasive materials or harsh chemicals.
• Device Body: Wipe the dash cam body with a dry or slightly damp cloth.

6.3. Firmware Updates

Periodically check the HUPEJOS official website or app for available firmware updates. Keeping your dash cam's firmware up-to-date ensures access to the latest features and performance improvements.

7. Troubleshooting

If you encounter issues with your HUPEJOS V8 Ultra dash cam, please refer to the following common problems and solutions:

8. Specifications

9. Warranty and Support

9.1. Warranty Information

The HUPEJOS V8 Ultra Dash Cam comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official HUPEJOS website for detailed warranty terms and conditions.

9.2. Customer Support

For technical assistance, troubleshooting, or any questions regarding your product, please contact HUPEJOS customer support. Contact details can typically be found on the official HUPEJOS website or in the warranty information provided with your product.