UYIKOO MD10 Hidden Camera Smoke Detector User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your UYIKOO MD10 Hidden Camera Smoke Detector. This device is designed for indoor security monitoring, offering 1080P HD video, Wi-Fi connectivity, night vision, and motion detection capabilities. Please read this manual thoroughly before use to ensure proper functionality and safety.

2. Package Contents

Upon opening the package, you should find the following items:

• UYIKOO MD10 Hidden Camera Smoke Detector Unit
• Battery
• Power Cable (USB)
• Extension Cord
• Fast Charging Board
• Instruction Manual

Figure 1: UYIKOO MD10 Hidden Camera Smoke Detector

Figure 2: All accessories included in the package

3. Initial Setup

3.1. Device Overview

Before starting, familiarize yourself with the internal components of the smoke detector camera:

Figure 3: Internal components of the MD10 camera, including battery connector, battery lead wire, TF card slot, and reset button.

3.2. Powering On the Device

The device is designed for automatic startup when connected to a power source.

1. Remove the device cover by gently twisting or prying it open.
2. Connect the power cable to the device's power input.
3. Plug the power cable into a suitable USB power adapter (not included).
4. The device will automatically power on. Wait until the red indicator light starts flashing rapidly. This indicates it's ready for Wi-Fi connection.

3.3. Connecting to Wi-Fi (Direct Connection)

To connect the camera directly to your smartphone for local viewing:

1. On your smartphone, go to Wi-Fi settings.
2. Look for a Wi-Fi network named "Blink-XXXXXX" (where XXXXXX is part of the device's UID, found on a sticker inside the device).
3. Connect to this network using the default password "0123456789".
4. Once connected, open the Lizvie Pro App. The app should automatically switch to the video page, displaying the camera's live feed.

3.4. Connecting to Home Network (Remote Viewing)

To enable remote viewing via your home Wi-Fi network:

1. In the Lizvie Pro App, click on the "Settings" icon (usually a gear) in the upper right corner of the device monitoring screen.
2. Select "Network Information".
3. Click "Wi-Fi manager".
4. Find your home Wi-Fi network from the list.
5. Enter your Wi-Fi password and click "Apply".
6. Wait for the device to connect to your home network. A "Wi-Fi Setting Successfully" prompt will appear, and the app will return to the monitoring screen.

Note: The device primarily supports 2.4GHz Wi-Fi networks. While some app interfaces may show 5G compatibility, for optimal stability and connection, it is recommended to use a 2.4GHz network.

4. Operating Instructions

4.1. Live View and Recording

Once connected, you can view the live feed from the camera through the Lizvie Pro App.

• Use the "Snapshot" button to capture still images.
• Use the "Record" button to manually start and stop video recording.

Figure 4: Lizvie Pro App interface showing live view and recording controls.

4.2. Motion Detection

The camera features motion detection with push notification alerts.

1. In the app settings, navigate to "Motion Detection Setting".
2. Enable motion detection and configure sensitivity levels as needed.
3. When motion is detected, the camera will automatically take a photo and send a push notification to your phone.

Figure 5: Example of a motion detection alert received on a smartphone.

4.3. Night Vision

The camera is equipped with 8 infrared lights for clear imaging in low-light conditions. This feature can be toggled on or off via the app settings.

Figure 6: Day mode versus Night Vision mode comparison.

4.4. Loop Recording

The camera supports loop recording, which means it will continuously record and overwrite the oldest footage when the storage card is full, ensuring uninterrupted surveillance.

4.5. Multi-User and Multi-View

The Lizvie Pro App allows for multiple users to view the camera feed simultaneously and supports monitoring multiple cameras within a single app interface.

Figure 7: Multi-user sharing and multi-camera viewing features.

5. Charging Instructions

The UYIKOO MD10 camera is powered by a 5000mAh battery, offering approximately 14 hours of operation in day mode and 9 hours in night mode on a full charge. There are two methods for charging:

5.1. Method 1: Charging with Device Powered On

With the device powered on and connected to its power source, simply connect the battery lead wire to the battery connector. A green light will illuminate on the device, indicating that the battery is charging.

5.2. Method 2: Charging with Fast Charging Board

For faster charging, use the provided Fast Charging Board.

1. Remove the Fast Charging Board from its packaging.
2. Connect a Type-C data cable (not included) to the Fast Charging Board to power it. A red light will illuminate on the board.
3. Connect the battery lead wire to the Fast Charging Board. A red light will illuminate on the board, indicating the battery is charging.

The product can be fully charged in approximately 4-7 hours using a fast-charging cable and adapter.

5.3. Concealing Indicator Lights

If the product's network indicator light is visible and you wish to conceal it, use the provided blackout cloth to cover the light source.

6. Storage Options

The UYIKOO MD10 offers flexible storage solutions for your recorded footage:

6.1. Micro SD Card Storage

The device supports Micro SD cards up to 256GB (not included). Insert the Micro SD card into the designated TF Card Slot inside the device.

6.2. Cloud Storage

A 30-day free trial for cloud storage is available, providing an additional secure backup option for your recordings.

Figure 8: Cloud and Micro SD card storage options.

7. Product Specifications

8. Troubleshooting

• Device Not Powering On: Ensure the battery is correctly connected and charged, or the device is plugged into a working power source.
• Wi-Fi Connection Issues:
  • Verify you are connecting to the correct "Blink-XXXXXX" network.
  • Double-check the Wi-Fi password (default is 0123456789).
  • Ensure your home Wi-Fi is 2.4GHz, as 5GHz networks are generally not supported by this device.
  • Make sure the camera is within range of your Wi-Fi router during setup.
  • Try resetting the device by pressing the reset button (located inside the device) for a few seconds.
• No Live Feed in App:
  • Confirm the device is powered on and connected to Wi-Fi.
  • Check your smartphone's internet connection.
  • Restart the Lizvie Pro App.
• Motion Detection Not Working:
  • Ensure motion detection is enabled in the app settings.
  • Adjust the sensitivity level.
  • Verify push notifications are enabled for the Lizvie Pro App on your smartphone.
• Poor Night Vision Quality:
  • Ensure the night vision feature is enabled in the app.
  • Check for any obstructions blocking the infrared lights.
• Battery Draining Quickly:
  • Frequent motion detection events and continuous live viewing can consume battery faster.
  • Ensure the battery is fully charged.
  • Consider keeping the device plugged in for continuous operation.

9. Important Safety Information

• This device is designed for indoor use only.
• Do not expose the device to extreme temperatures, humidity, or direct sunlight.
• Keep the device away from water and other liquids.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Ensure proper ventilation around the device.
• This device is a camera disguised as a smoke detector and does not provide actual smoke detection functionality.

10. Warranty and Support

For any questions, technical support, or warranty inquiries, please contact UYIKOO customer service. Refer to the contact information provided in your product packaging or on the official UYIKOO website.