Bewinner Nut Picker Roller Instruction Manual

Introduction

The Bewinner Nut Picker Roller is a versatile and efficient tool designed to simplify the collection of various nuts, fruits, and small objects from your lawn or garden. Its adjustable three-section pole and durable stainless steel construction allow for comfortable use without the need for bending, making yard work easier and more enjoyable.

Safety Information

• Always inspect the tool for any damage before each use.
• Keep hands and fingers clear of the rolling cage mechanism during operation to prevent pinching.
• Ensure the pole sections are securely locked in place before use to avoid accidental collapse.
• Store the tool in a dry, safe place away from children and pets.

Package Contents

Please verify that all components are present in your package:

• 1 x Nut Collector (rolling cage assembly)
• 3 x Rods (pole sections)
• 1 x Accessory (likely a small tool or spare part, as per product description)

Setup and Assembly

Follow these steps to assemble your Bewinner Nut Picker Roller:

1. Connect the Pole Sections: The nut picker comes with three detachable pole sections. Connect these sections by aligning the ends and pushing them together until they click or are securely fastened. Ensure the blue clips are engaged to lock the sections.
2. Attach the Rolling Cage: Securely attach the assembled pole to the rolling cage mechanism. Ensure it is firmly connected to prevent detachment during use.
3. Adjust Pole Length: Use the blue clips on the pole to adjust the length to your preferred height. Flip the clip up to loosen, adjust the length, and then flip it down to lock it securely.

Operating Instructions

The Bewinner Nut Picker Roller is designed for simple and effective use:

1. Rolling to Collect: Hold the handle and roll the cage over the nuts, fruits, or small objects you wish to collect. The flexible stainless steel wires will spread to allow items to enter the cage and then close to retain them.
2. Efficient Collection: Roll the tool across the desired area. The design allows for quick and easy collection without requiring you to bend over.
3. Emptying the Cage: To empty the collected items, locate the foot-actuated release mechanism or the opening on one end of the cage. Simply pull up the release handle or open the end to allow the contents to fall out into a bag or container.

Maintenance

• Cleaning: After each use, remove any debris, leaves, or dirt from the rolling cage and pole. A damp cloth can be used to wipe down the surfaces.
• Storage: Store the nut picker roller in a dry place to prevent rust, especially on the stainless steel components. The three-section pole design allows for compact storage.
• Inspection: Periodically check the clips and connections for tightness and wear. Ensure the rolling mechanism operates smoothly.

Troubleshooting

• Items not picking up: Ensure the ground is relatively clear of excessive leaves or debris that might obstruct the rolling cage. Apply gentle downward pressure while rolling.
• Pole sections loosening: Check that the blue clips are fully engaged and locked after adjusting the pole length.
• Difficulty emptying: Ensure the release mechanism is fully opened. If using a foot-actuated release, ensure sufficient pressure is applied.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Bewinner customer service directly. Details can typically be found on the manufacturer's website or through your point of purchase.