ACCOHOHO LM093-527DWT+LM089-223DWT-2PCS-1

ACCOHOHO 7-Drawer Dresser and Nightstand Set User Manual

Model: LM093-527DWT+LM089-223DWT-2PCS-1

Brand: ACCOHOHO

1. Important Safety Instructions

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

  • Assembly Required: This product requires assembly. Ensure all components are present before beginning.
  • Heavy Components: Be careful when handling heavy components to avoid injury. It is recommended to assemble with at least two people.
  • Pinch Points: Keep fingers away from push-to-open drawers to prevent pinching, especially around children.
  • Stability: Ensure stability during and after assembly to prevent tip-overs. Always use the provided anti-tipping device to secure the dresser to a wall.
  • Electrical Safety: For nightstands with charging stations, ensure the power cord is not pinched or damaged. Do not overload the outlets.
  • Children and Pets: Keep small parts and packaging materials away from children and pets to prevent choking hazards.

2. Package Contents

Verify that all items listed below are included in your package. If any parts are missing or damaged, please contact customer support.

  • 1 x ACCOHOHO 7-Drawer Dresser (52"W)
  • 2 x ACCOHOHO 3-Drawer Nightstands (22"W each) with Integrated Charging Stations
  • 1 x Hardware Pack (screws, dowels, anti-tipping device, etc.)
  • 1 x Assembly Instruction Manual (this document)
Diagram showing dimensions and components of the dresser and nightstand, including drawer sizes and weight limits.

Image 2.1: Overview of the dresser and nightstand with key dimensions and load capacities. The nightstand is 22 inches wide and 27 inches high, with a 50lb weight capacity on top. The dresser is 52 inches wide and 32 inches high, with a 100lb tabletop capacity and 30lb drawer capacity. It also highlights FSC-certified wood material and the anti-tipping device.

3. Assembly Instructions

Assembly is required for this furniture set. Please follow the detailed step-by-step instructions provided in the separate assembly guide included in your package. Below are general guidelines and important considerations.

  1. Preparation: Clear a spacious area for assembly. Lay out all parts and hardware. Use the provided hardware list to identify each component.
  2. Tools: Ensure you have the necessary tools (e.g., screwdriver, hammer) as specified in the assembly guide.
  3. Step-by-Step: Follow the numerical order of steps in the assembly guide. Do not skip steps.
  4. Drawer Slides: Pay close attention to the installation of drawer slides to ensure smooth operation.
  5. Anti-Tipping Device: It is crucial to install the anti-tipping device for both the dresser and nightstands. Securely attach it to a wall stud using appropriate hardware to prevent accidental tip-overs, especially in homes with children.
  6. Final Check: After assembly, ensure all screws are tightened and the furniture is stable.
Diagram showing the built-in push-to-open mechanism, smooth drawer sliding track, and the sturdy 3.3-inch thickened base.

Image 3.1: Detailed view of the internal push-to-open mechanism, the smooth sliding track for drawers, and the robust 3.3-inch thickened box-framed base, highlighting key structural features for assembly.

Close-up of the anti-tipping device installation on the back of the furniture.

Image 3.2: Close-up illustration of the anti-tipping device, which must be securely installed to prevent the furniture from tipping over.

4. Operating Instructions

4.1 Push-to-Open Drawers

The dresser and nightstands feature a handleless design with push-to-open functionality for a clean aesthetic.

  • To Open: Gently press the center of the drawer front. The drawer will spring open slightly, allowing you to pull it out fully.
  • To Close: Push the drawer firmly until it clicks into place and is flush with the furniture frame.
Image showing a hand pressing a drawer to open it, highlighting the handleless design and soft curved profile.

Image 4.1: Demonstration of the handle-free drawers opening effortlessly with a gentle push, showcasing the soft curved profile of the furniture.

4.2 Integrated Charging Station (Nightstands)

Each nightstand is equipped with a recessed charging station for convenient power access.

  • Power Connection: Plug the 4.9-foot power cord from the nightstand into a standard 125V/12A wall outlet.
  • Outlets: The charging station includes 2 AC outlets (125V/12A), 2 USB ports (5V/2.1A), and 1 Type-C port (5V/2.1A).
  • Usage: Connect your electronic devices (phones, tablets, lamps, etc.) to the appropriate ports for charging or power.
  • Safety: Do not exceed the maximum electrical load for the charging station. Avoid spilling liquids directly onto the charging unit.
Image showing the recessed 5-in-1 charging station on a nightstand with devices plugged in, detailing the AC, USB, and Type-C ports.

Image 4.2: Close-up of the recessed 5-in-1 charging station on the nightstand, illustrating its 2 AC outlets, 2 USB ports, and 1 Type-C port, along with the 4.9-foot power cord.

4.3 Drawer Capacity

  • Dresser Drawers: The 7-drawer dresser features 4 large drawers (22.4"W x 11.8"D x 5.7"H) and 3 smaller drawers (14.5"W x 11.8"D x 5.7"H). Each drawer has a maximum load capacity of 30 lbs.
  • Nightstand Drawers: Each nightstand has 3 drawers. Each drawer has a maximum load capacity of 25 lbs.
  • Tabletop Capacity: The dresser tabletop can support up to 100 lbs. Each nightstand tabletop can support up to 50 lbs.
Dresser with multiple drawers open, showing organized storage for clothes and accessories.

Image 4.3: The 7-drawer dresser with several drawers open, demonstrating ample space for organizing various items like clothing, bedding, and personal accessories.

5. Maintenance

Proper care will ensure the longevity and appearance of your ACCOHOHO furniture set.

  • Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the scratch- and water-resistant finish.
  • Spills: Promptly wipe up any spills to prevent staining or water damage.
  • Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration.
  • Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
  • Drawer Mechanism: Periodically check the push-to-open mechanisms and drawer slides for smooth operation. If they become stiff, a small amount of silicone lubricant can be applied to the slides (avoiding the push mechanism itself).

6. Troubleshooting

6.1 Push-to-Open Drawer Not Functioning

  • Check Alignment: Ensure the drawer is properly aligned within its runners and fully closed.
  • Reset Mechanism: If the drawer does not spring open when pressed, gently press the left side panel of the drawer to reset the mechanism. Then, press the center of the drawer front.
  • Obstruction: Check for any obstructions inside the drawer or along the slides that might be preventing proper operation.

Video 6.1: This video demonstrates the push-to-open drawer mechanism and provides a troubleshooting tip for when the drawer does not open. It shows how to reset the left side panel if the center press is not working.

6.2 Wobbly Furniture

  • Tighten Screws: Re-check and tighten all assembly screws. Do not overtighten.
  • Level Surface: Ensure the furniture is placed on a flat, level surface. Use furniture pads or shims if necessary.
  • Anti-Tipping Device: Confirm the anti-tipping device is securely installed and properly anchored to the wall.

6.3 Charging Station Not Working

  • Power Source: Verify the nightstand's power cord is securely plugged into a working wall outlet. Test the outlet with another device.
  • Cable Connection: Ensure your device's charging cable is properly connected to the USB/Type-C port or AC outlet.
  • Overload: Check if too many devices are connected, potentially causing an overload. Unplug some devices and try again.
  • Damage: Inspect the power cord and charging unit for any visible damage. If damaged, discontinue use and contact customer support.

7. Specifications

FeatureDetail
BrandACCOHOHO
Model NumbersLM093-527DWT (Dresser), LM089-223DWT (Nightstand)
MaterialFSC-certified engineered wood
FinishScratch- and water-resistant
Dresser Dimensions (W x D x H)52" x 15.6" x 32"
Nightstand Dimensions (W x D x H)22" x 15.7" x 27"
Number of Dresser Drawers7 (4 large, 3 small)
Number of Nightstand Drawers3 per nightstand
Dresser Tabletop Load Capacity100 lbs
Dresser Drawer Load Capacity30 lbs per drawer
Nightstand Tabletop Load Capacity50 lbs
Nightstand Drawer Load Capacity25 lbs per drawer
Charging Station (Nightstands)2 AC Outlets (125V/12A), 2 USB Ports (5V/2.1A), 1 Type-C Port (5V/2.1A)
Power Cord Length4.9 feet
Total Item Weight124 pounds (for the set)
Special FeaturesPush-to-Open Drawers, Curved Profile, Anti-Tipping Device
ACCOHOHO 7-Drawer Dresser and Nightstand Set in Off White, showcasing the modern design and curved edges.

Image 7.1: The complete ACCOHOHO 7-drawer dresser and two nightstands set, illustrating the overall design and proportions in an off-white finish.

8. Warranty Information

ACCOHOHO products are manufactured with quality and care. This product comes with a limited manufacturer's warranty covering defects in materials and workmanship under normal use. Please refer to the warranty card included in your package or visit the official ACCOHOHO website for detailed warranty terms and conditions.

The warranty typically covers:

  • Manufacturing defects
  • Damage during shipping (if reported promptly)

The warranty does not cover:

  • Normal wear and tear
  • Damage due to improper assembly or misuse
  • Damage from accidents, neglect, or unauthorized repairs

9. Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact ACCOHOHO customer support.

  • Website: Visit the official ACCOHOHO website for FAQs and support contact information.
  • Email: Refer to your purchase documentation for customer service email.
  • Phone: Refer to your purchase documentation for customer service phone number.

When contacting support, please have your model number (LM093-527DWT+LM089-223DWT-2PCS-1) and proof of purchase readily available.

Related Documents - LM093-527DWT+LM089-223DWT-2PCS-1

Preview Red Barrel Studio Nightstand Assembly Instructions - Model (1)
Step-by-step assembly guide for the Red Barrel Studio nightstand. Learn how to attach legs and the lower shelf to your partially pre-assembled bedside table. Includes parts list and visual descriptions.
Preview Fabric 5 Drawer Storage Cabinet - Assembly Instructions
Comprehensive assembly instructions for the Ebern Designs Fabric 5 Drawer Storage Cabinet (Model S-ASNG081-V3.1). This guide provides step-by-step directions, safety warnings, and general guidelines for building your new bedroom dresser or chest of drawers.
Preview Assembly Instructions for Quevillon Furniture: Nightstands, Chests, Dressers, and Storage Beds
Comprehensive assembly instructions for Quevillon furniture, including 1-Drawer and 2-Drawer Nightstands with USB, 5-Drawer Chest, 6-Drawer Dresser, 6-Drawer Dresser & Mirror, and various sizes of Panel Storage Beds (Twin, Full, Queen, King). Includes part lists, hardware lists, and detailed step-by-step assembly guidance.
Preview Langhong 6-Drawer Dresser Installation Manual
Comprehensive installation manual for the Langhong 6-Drawer Dresser, providing step-by-step assembly instructions, safety warnings, and warranty information.
Preview Ebern Designs Narrow Nightstand Assembly Instructions
Detailed assembly instructions for the Ebern Designs Narrow Nightstand with drawers, including a parts list, step-by-step guidance, and wall mounting instructions. This guide helps users assemble their furniture safely and correctly.
Preview Walker Edison FRAB4C Nightstand Assembly Instructions
Detailed assembly instructions for the Walker Edison Mid-Century Modern 1-Drawer Nightstand (Model FRAB4C), including parts list, hardware list, and step-by-step guidance.