XTU mini1 Action Camera User Manual

1. Introduction

Thank you for choosing the XTU mini1 Action Camera. This ultra-compact and lightweight camera is designed to capture your adventures in stunning 5K video and 32MP photos. Featuring advanced 6-axis image stabilization, 5-meter waterproofing without an additional case, super night vision, and 5G WiFi connectivity, the mini1 is your ideal companion for sports, travel, vlogging, and everyday recording. Please read this manual carefully to ensure proper use and optimal performance of your device.

The XTU mini1 Action Camera offers a range of features including 6-axis stabilization, 5m waterproofing, 5K video recording, 170-degree wide-angle lens, 5G WiFi, lightweight design, a Sony IMX335 sensor, 9:16 vertical shooting, night mode, and pre-recording capabilities.

2. Package Contents

Please check the package contents to ensure all items are present:

• XTU mini1 Action Camera
• Waterproof Case (for depths beyond 5m, up to 40m)
• Frame Mount
• Remote Control
• USB Type-C Cable
• Various Mounting Accessories (e.g., helmet mounts, bicycle mounts, adhesive pads, straps)
• Cleaning Cloth
• User Manual

The image displays the comprehensive set of accessories provided with the XTU mini1 Action Camera, including the camera itself, various mounts, a remote control, cables, and a waterproof housing.

3. Product Overview

Familiarize yourself with the camera's components:

• Lens: High-resolution lens with 170-degree wide angle.
• Display Screen: 1.3-inch screen for live view and menu navigation.
• Power Button: Used to power on/off the camera and switch modes.
• Shutter/Record Button: Used to start/stop recording or take photos.
• Mode Button: Used to cycle through different shooting modes.
• USB Type-C Port: For charging and data transfer.
• MicroSD Card Slot: For memory card insertion.
• Microphone/Speaker: For audio recording and playback.

A detailed view of the XTU mini1 Action Camera, highlighting its compact form factor and the location of its lens and side controls.

4. Setup

4.1 Charging the Battery

The XTU mini1 is equipped with a built-in 1350mAh battery. Before first use, fully charge the camera.

1. Connect the camera to a USB power adapter (not included) or a computer using the provided USB Type-C cable.
2. The charging indicator will illuminate. Once fully charged, the indicator will change or turn off.

The camera is shown connected to a charging cable, illustrating the internal 1350mAh battery and its charging process. A full charge allows for up to 180 minutes of continuous recording.

4.2 Inserting a MicroSD Card

A MicroSD card (not included) is required to store videos and photos. Use a high-speed card (U3 or higher recommended) up to 256GB.

1. Locate the MicroSD card slot on the side of the camera.
2. Insert the MicroSD card with the contacts facing the correct direction until it clicks into place.
3. To remove, gently push the card until it springs out.

4.3 Mounting the Camera

The XTU mini1 comes with various accessories for different mounting options:

• Frame Mount: Use for general protection and attachment to standard action camera mounts.
• Waterproof Case: Essential for underwater activities beyond 5 meters, protecting the camera up to 40 meters.
• Adhesive Mounts: For attaching to flat or curved surfaces like helmets.
• Strap Mounts: For securing the camera to wrists, arms, or other objects.

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the Power button for a few seconds until the screen turns on.
• Power Off: Press and hold the Power button for a few seconds until the screen turns off.

5.2 Recording Video (5K/32MP)

The camera supports 5K video resolution and 32MP still images.

1. Ensure the camera is in video mode (indicated by an icon on the screen). If not, press the Mode button to switch.
2. Press the Shutter/Record button to start recording. A red indicator light will flash, and a timer will appear on the screen.
3. Press the Shutter/Record button again to stop recording.

This image demonstrates the camera's capability to record 5K/30FPS video and capture 32MP photos, with a clear example of a snowboarder being filmed.

5.3 Taking Photos

1. Ensure the camera is in photo mode. Press the Mode button to switch if necessary.
2. Press the Shutter/Record button to take a photo.

5.4 6-Axis Image Stabilization

The XTU mini1 features 6-axis Electronic Image Stabilization (EIS) to deliver smooth and stable footage, even during intense activities.

• EIS is typically enabled by default. You can check or adjust this setting in the camera's menu.
• For best results, ensure the camera is securely mounted.

This image illustrates the effectiveness of the 6-axis EIS, comparing blurry footage without stabilization to clear, stable footage with stabilization enabled, featuring a dirt bike in motion.

5.5 Vertical Shooting (9:16)

The camera supports 9:16 vertical shooting, ideal for social media platforms like Instagram and TikTok.

• Select the vertical shooting mode from the camera's settings.
• Mount the camera vertically to capture content optimized for vertical viewing.

The image shows the XTU mini1 camera mounted for vertical 9:16 aspect ratio shooting, demonstrating its suitability for social media content, alongside a comparison with traditional 16:9 horizontal video.

5.6 Waterproof Use

The camera body is waterproof up to 5 meters without a case. For deeper dives or extended water exposure, use the included waterproof case.

• Up to 5m: The camera can be used directly for snorkeling, swimming, or in rainy conditions.
• Up to 40m: Insert the camera into the waterproof case for diving and other deep-water activities. Ensure the case is properly sealed before submersion.

A diver uses the XTU mini1 Action Camera underwater, demonstrating its 5-meter native waterproofing and the extended 40-meter waterproof capability when enclosed in its protective case.

5.7 Connecting via 5G WiFi

Connect your camera to a smartphone via 5G WiFi for quick file transfer and remote control using the XTU app.

1. Download the official XTU app from your smartphone's app store.
2. Enable WiFi on your XTU mini1 camera through the settings menu.
3. On your smartphone, connect to the camera's WiFi network.
4. Open the XTU app to control the camera, view live footage, and transfer files.

The image illustrates the XTU mini1 Action Camera's 5G WiFi connectivity, enabling rapid media transfer to a smartphone, with a visual representation of increased download speed.

5.8 Super Night Vision and HDR

The camera's 1/2.5-inch CMOS sensor and HDR function ensure clear images in varying light conditions, while the super night vision feature enhances low-light performance.

• HDR: Automatically adjusts exposure to capture details in both bright and dark areas of a scene.
• Night Vision: Optimizes settings for low-light environments, allowing for high-definition recording even at night.

This image compares the night vision capabilities, showing that the XTU mini1 camera captures significantly brighter and more detailed footage in low-light conditions compared to a competitor's camera.

5.9 Advanced Recording Features (Pre-recording, HDR, Dashcam)

The XTU mini1 includes features like pre-recording, HDR, and can function as a dashcam.

• Pre-recording: Captures footage a few seconds before you press the record button, ensuring you don't miss critical moments.
• Dashcam Function: Can be set to loop recording and automatically start recording when powered, suitable for vehicle use.

The image showcases the versatility of the XTU mini1, depicting its use in fishing scenarios, as a dashcam during driving, and highlighting its pre-recording feature that captures moments before the record button is pressed.

6. Maintenance

• Cleaning: Use the provided cleaning cloth to wipe the lens and screen. For stubborn dirt, use a lens cleaning solution.
• Storage: Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: For long-term storage, charge the battery to about 50% every few months to prolong its lifespan.
• Waterproof Seals: Regularly inspect the waterproof seals and port covers for any damage or debris, especially before using the camera in water.

7. Troubleshooting

8. Specifications

9. Warranty and Support

XTU products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official XTU website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Official Website: XTU Official Store on Amazon