fishkeeper Smart LED Aquarium Light FK132-30W Instruction Manual

1. Product Overview

The fishkeeper Smart LED Aquarium Light FK132-30W is designed to provide optimal lighting for fish tanks ranging from 32 to 40 inches. It features a 24/7 natural mode, customizable DIY colors, multiple timer options, and adjustable brightness levels. The light is IP68 waterproof and constructed with a durable aluminum alloy for efficient heat dissipation.

Image: The fishkeeper Smart LED Aquarium Light, showing the main light bar and the attached control panel with a digital display.

2. Safety Information

• Always disconnect power before performing any maintenance or installation.
• Ensure the power cord is not damaged and is routed safely to prevent tripping hazards or water contact.
• This product is IP68 waterproof, meaning it can be submerged. However, the power adapter and controller are not waterproof and must be kept dry.
• Do not attempt to disassemble or modify the light fixture or controller. This will void the warranty and may cause damage or injury.
• Keep out of reach of children and pets.
• Use only with the provided power adapter.

3. Package Contents

The package includes the following items:

• fishkeeper Smart LED Aquarium Light (FK132-30W)
• Extendable Brackets (2 units)
• Power Adapter
• Instruction Manual (this document)

4. Setup Instructions

1. Attach Brackets: Slide the extendable brackets onto both ends of the light fixture. Ensure they are securely attached.


Image: Close-up view of the adjustable metal brackets, showing how they extend to fit different tank sizes.

2. Position Light: Place the light fixture on top of your aquarium, adjusting the extendable brackets to fit the tank's width (32-40 inches).
3. Connect Power: Plug the power adapter into the light fixture's input port, then plug the adapter into a standard electrical outlet.
4. Initial Time Sync (24/7 Mode): To activate the 24/7 natural mode and synchronize with your local time, press and hold the "24/7" button on the controller for 3 seconds. The light will automatically adjust its cycle based on your current local time.


Image: A visual representation of the 24/7 natural mode, illustrating the light intensity changes throughout a 24-hour cycle, mimicking natural daylight.

5. Operating Instructions

5.1 Controller Overview

Image: Detailed diagram of the light's control panel, highlighting the digital clock, 24/7 mode button, color button, timer button, and brightness controls.

• Digital Display: Shows current time or setting.
• Time Adjustment Buttons (+/-): Adjust time or values.
• 24/7 Button: Activates/deactivates 24/7 natural mode. Hold for 3 seconds to sync local time.
• Color Button: Cycles through 9 DIY colors and auto-cycle mode.
• Brightness Button: Adjusts brightness levels (10 levels).
• Timer Button: Sets the desired lighting duration (4-12 hours).

5.2 24/7 Natural Mode

This mode automatically simulates a full day of natural light. It begins with sunrise at 06:00, reaches peak brightness at noon, transitions to sunset, then moonlight blue at 19:00, and turns off at 23:00. This cycle automatically synchronizes with your local time upon initial setup and does not require manual adjustment unless the battery is replaced.

Note: In 24/7 mode, timer and brightness settings cannot be manually adjusted.

5.3 DIY Color and Brightness Adjustment

You can customize the light's color and brightness when not in 24/7 mode.

• Color Selection: Short press the "Color" button to cycle through 9 vivid colors (Full Spectrum, Red, Blue, Green, Orange, Purple, Yellow, Cyan) and an 8-color auto-cycle mode.


Image: Visual representation of the 9 available DIY colors and the auto-cycle option for the aquarium light.

• Brightness Levels: Short press the "Brightness" button to cycle through 10 levels of brightness (10% to 100%).


Image: A comparison chart highlighting the features of the fishkeeper light, including 24/7 mode, 9 timer settings, upgraded LED chips, aluminum material, and IP68 waterproof rating.

5.4 Timer Settings

The light offers 9 timer options to automatically turn on and off at set intervals. This feature is available when not in 24/7 mode.

• Setting Timer: Short press the "Timer" button to select a duration from 4 to 12 hours. Once set, the light will operate for the chosen duration and then turn off, repeating daily.


Image: Illustration of the 9 available timer settings, ranging from 4 hours to 12 hours, for automated light operation.

6. Maintenance

• Cleaning: Disconnect the power before cleaning. Wipe the light fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Waterproof Rating: The light bar is IP68 waterproof, allowing for submersion. However, ensure the controller and power adapter remain dry.


Image: The fishkeeper aquarium light partially submerged in water, with an "IP68 Truly" label, indicating its high waterproof capability.

• Bracket Check: Periodically check that the extendable brackets are securely seated on the aquarium to prevent accidental drops.

7. Troubleshooting

8. Specifications

Image: A table detailing specifications for various wattage models of the fishkeeper aquarium light, including LED quantity, light size, and application range.

9. Warranty & Support

9.1 Warranty Information

This product comes with a 2-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9.2 Customer Support

For technical assistance, troubleshooting, or warranty claims, please contact fishkeeper customer support through the retailer's platform or visit the official fishkeeper website.

Please have your model number (FK132-30W) and purchase date available when contacting support.