EMKE Smart WiFi Heating Element for Bathroom Radiator 600W - User Manual

1. Introduction

The EMKE Smart WiFi Heating Element is designed to provide efficient and intelligent heating for your bathroom radiator, ensuring comfort and convenience. This device features smart temperature control and WiFi connectivity for remote operation. Please read this manual carefully before installation and use to ensure safe and optimal performance.

2. Safety Instructions

• Always ensure the main power supply is completely switched off before attempting any installation, maintenance, or repair.
• The heating element and towel warmer must be installed by qualified plumbers and electricians to ensure compliance with local regulations and safety standards.
• The heating element is designed for use in humid environments, featuring IPX4 splash protection.
• This device includes a child safety lock, overheating protection, and automatic frost protection (activates below 7°C).
• Ensure the bathroom radiator contains sufficient liquid (water or antifreeze solution) before operating the heating element.
• The heating element must always be installed in the lower part of the towel warmer for proper function and safety.

3. Package Contents

Verify that all components are present:

• EMKE Smart WiFi Heating Element (600W)
• User Manual

Note: The radiator itself is not included.

4. Setup and Installation

Follow these steps for proper installation of your EMKE Smart WiFi Heating Element:

1. Preparation: Ensure the power supply to the bathroom radiator circuit is completely disconnected.
2. Radiator Fluid: Confirm that the bathroom radiator is filled with the appropriate amount of water or antifreeze solution.
3. Installation Position: Insert the heating element into the designated G1/2" connection thread at the lower part of your towel warmer.
4. Secure Connection: Tighten the heating element securely to prevent leaks.
5. Electrical Connection: Connect the heating element to a suitable power outlet. For safety, this step should be performed by a qualified electrician.

Power Recommendation Table

Note: The non-heating part of the heating element is not heated for safety reasons.

5. Operating Instructions

The EMKE Smart WiFi Heating Element offers both manual control and smart control via a smartphone application.

5.1 Manual Control

• Power Button: Press to turn the heating element ON or OFF.
• Mode Switch: Cycle through the available heating modes.
• Temperature/Time Adjustment (+/-): Adjust the target temperature or set timer parameters. The room temperature sensor operates within a range of 7-30°C.

5.2 Smart WiFi Control (App)

Control your heating element remotely using the dedicated smartphone application. The device is compatible with Tuya, Smartlife, and Alexa systems.

• App Pairing: Follow the instructions provided with the app to pair your heating element.
• Temperature Setting: Precisely set the desired temperature from 7°C to 30°C.
• 7-Day/24-Hour Programming: Create flexible heating schedules to suit your routine.
• Voice Control: Integrate with smart home assistants like Alexa for hands-free operation.

5.3 Heating Modes

The heating element features four distinct heating modes:

• Comfort Mode (30°C): Provides maximum warmth for a cozy bathroom environment.
• Economy Mode (20°C): Maintains a comfortable temperature while optimizing energy consumption.
• Boost Mode (70°C): Rapidly heats the radiator for quick drying of towels or a sudden need for warmth.
• Frost Protection Mode (<7°C): Automatically activates to prevent freezing when the room temperature drops below 7°C.

6. Maintenance

To ensure the longevity and optimal performance of your EMKE Smart WiFi Heating Element:

• Cleaning: Regularly wipe the exterior of the heating element with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Inspection: Periodically check the power cable and connections for any signs of damage. If damage is found, disconnect power immediately and contact a qualified technician.
• Fluid Level: Ensure the radiator always has an adequate fluid level.

7. Troubleshooting

If you encounter issues with your heating element, refer to the following common solutions:

• No Power: Check if the heating element is properly plugged into a working power outlet. Verify the circuit breaker has not tripped.
• Not Heating: Ensure the desired temperature is set above the current room temperature. Check if the heating mode is active. Verify the radiator has sufficient fluid.
• WiFi Connection Issues: Ensure your router is working and the heating element is within range. Follow the app's instructions for re-pairing if necessary.
• Error Codes: If the display shows an error code, refer to the app or contact customer support for specific guidance.

For problems not covered here, please contact EMKE customer support.

8. Specifications

9. Warranty and Support

EMKE provides comprehensive services for your product:

• Return Policy: A 14-day return policy is offered.
• Repair Service: The product comes with a 2-year repair service.

For any questions, technical assistance, or warranty claims, please contact EMKE customer support through your purchase platform or the official EMKE website.