1. Important Safeguards
Please read all instructions carefully before using this electric space heater and retain them for future reference. Failure to follow these instructions may result in fire, electric shock, injury, or property damage.
- Always place the heater on a firm, level surface.
- Do not operate the heater near water or in wet locations.
- Do not cover the heater or block the air intake/outlet vents.
- Keep children and pets away from the heater.
- Unplug the heater when not in use or before cleaning.
- Ensure the power cord is not damaged and is kept away from heated surfaces.
- This heater is equipped with multiple safety features, including V0 flame-retardant material, cool-touch housing, thermal insulated wiring, child lock, 45° tip-over protection, and overheat protection. It is ETL certified.
2. Product Overview
The Hykolity 30-inch electric space heater (Model WHJ-0902) is designed for efficient heating of rooms up to 300 sq ft. It features a powerful PTC heating element, 70° oscillation, and smart controls for optimal comfort.
Package Contents:
- 1 x Hykolity 30" Electric Space Heater Unit
- 1 x Remote Control
- 1 x User Manual
3. Setup
3.1 Unpacking
Carefully remove the heater and all accessories from the packaging. Inspect the unit for any signs of damage. If any damage is found, do not operate the heater and contact customer support.
3.2 Placement
Place the heater on a stable, level, and heat-resistant surface. Ensure there is at least 3 feet (0.9 meters) of clearance from any walls, furniture, curtains, or other combustible materials. Do not place the heater directly under a power outlet.
3.3 Power Connection
Plug the power cord into a standard 120V AC, 60Hz electrical outlet. Ensure the outlet is in good condition and not overloaded with other appliances.
4. Operating Instructions
4.1 Control Panel
The heater features a smart touch control panel located on the top of the unit. The LED display shows the current temperature and selected settings.
- Power Button: Turns the heater ON/OFF.
- Mode Button: Cycles through heating modes (H1, H2, FA, ECO).
- Temperature Adjustment (+/-): Increases or decreases the target temperature in ECO mode (50-95°F).
- Oscillation Button: Activates/deactivates the 70° wide-angle oscillation.
- Timer Button: Sets the 24-hour auto-off timer.
- Child Lock: Press and hold the oscillation button for 3 seconds to activate/deactivate.
4.2 Remote Control
The included remote control allows for convenient operation of all heater functions from a distance.
- All buttons on the remote correspond to the functions on the control panel.
- Ensure a clear line of sight between the remote and the heater's display for optimal performance.
4.3 Operating Modes
- H1 (Low Heat): Provides a lower heat output for gentle warmth.
- H2 (High Heat): Delivers maximum heat output for rapid warming.
- FA (Fan Only): Circulates air without heat, useful for air circulation.
- ECO Mode: Automatically adjusts heat output based on the set temperature (50-95°F) to optimize energy consumption.
4.4 Oscillation
The 70° wide-angle oscillation feature distributes warm air evenly across a larger area, covering rooms from 100 to 300 sq ft.
4.5 Timer Function
Set the auto-off timer for up to 24 hours. The heater will automatically turn off after the set duration, providing convenience and energy efficiency.
4.6 Temperature Control
In ECO mode, you can set your desired room temperature between 50°F and 95°F with 1°F precision. The heater will maintain this temperature by cycling on and off as needed.
4.7 Official Product Video
5. Maintenance
5.1 Cleaning
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Use a vacuum cleaner with a brush attachment to gently clean the air intake and outlet grilles to remove dust and lint.
- Never immerse the heater in water or allow water to drip into the interior.
5.2 Storage
When not in use, store the heater in a cool, dry place. It is recommended to store it in its original packaging or cover it to protect it from dust.
6. Troubleshooting
If your heater is not operating correctly, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power to the unit. | Check if the power cord is securely plugged into a working outlet. Check the circuit breaker. |
| Heater turns off unexpectedly. | Tip-over protection activated. Overheat protection activated. | Ensure the heater is on a stable, flat surface. Unplug the heater, let it cool for 30 minutes, then plug it back in. Clear any obstructions from air vents. |
| No heat output. | Heater is in Fan Only mode. Temperature setting is too low. | Press the Mode button to select a heat mode (H1, H2, or ECO). Increase the target temperature. |
| Remote control not working. | Batteries are dead or incorrectly inserted. Obstruction between remote and heater. | Replace batteries. Ensure clear line of sight to the heater's display. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | hykolity |
| Model Number | WHJ-0902 |
| Heat Output | 1500 Watts |
| Voltage | 120 Volts |
| Heating Coverage | Up to 300 ft² |
| Oscillation | 70° Wide Angle |
| Temperature Range | 50-95°F (1°F precision) |
| Timer | 24 Hours |
| Dimensions (D x W x H) | 7.87"D x 7.87"W x 30.38"H |
| Item Weight | 9.48 pounds |
| Safety Certifications | ETL Listed |
8. Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Hykolity website. If you encounter any issues or require technical assistance, please contact Hykolity customer support through the contact information provided in your product packaging or on the official website.
