Elikliv Laser Tape Measure LTM-02 User Manual

Introduction

Thank you for choosing the Elikliv LTM-02 Laser Tape Measure. This device combines the functionality of a traditional tape measure with advanced laser distance measurement capabilities, offering versatility and precision for various tasks. Please read this manual thoroughly before use to ensure safe and optimal operation.

Safety Information

This product is a Class II laser device. Observe the following safety precautions:

• Do not stare directly into the laser beam.
• Do not aim the laser beam at people or animals.
• Avoid direct eye exposure to the laser beam.
• The laser output power is less than 1mW.
• Keep the device out of reach of children.

Package Contents

Verify that all items are present in your package:

• Elikliv LTM-02 Laser Tape Measure
• USB-C Charging Cable
• Lanyard Strap
• User Manual (this document)

Product Features and Components

Familiarize yourself with the key features and components of your Elikliv LTM-02.

Figure 1: Laser Measurement Capability
The LTM-02 offers precise laser distance measurement up to 328 feet, displayed clearly on the digital screen.

Figure 2: Professional Grade Tape Measure
The traditional tape features a matte nylon coating, dual inch and metric scales, and double-sided printing for enhanced readability. It offers a standout of up to 6 feet.

Figure 3: Digital Tape Measure for Short Distances
For short distances (0-16.4 feet), the device provides a digital readout directly from the tape measure, combining the convenience of a physical tape with digital precision.

Figure 4: Crystal Clear Digital HD Display
The high-definition display ensures measurements are easily readable in various lighting conditions, day or night.

Figure 5: Control Panel and Measuring Modes
The device features a user-friendly control panel for selecting various functions and offers 9 distinct measuring modes for diverse applications.

Setup

Initial Charging

Before first use, fully charge the device. Connect the supplied USB-C cable to the charging port on the device and to a standard USB power adapter (not included). The charging indicator will show the charging status.

Figure 6: USB-C Charging
The device is equipped with a 600mAh rechargeable battery, offering approximately 6000 measurements per charge and supporting 2-hour fast charging via USB-C.

Operating Instructions

Power On/Off

• Press the Power button () to turn the device on.
• Press and hold the Power button to turn the device off.
• The device features an auto-shutdown function after 2 minutes and 30 seconds of inactivity to conserve battery.

Using the Traditional Tape Measure

• Pull the tape measure out to the desired length. The tape will automatically lock in place.
• To retract the tape, press the release button located on the front of the device.
• The tape features a strong magnetic hook for secure attachment to metallic surfaces.

Using the Laser Measurement Function

Basic Distance Measurement

1. Turn on the device.
2. Press the Power button once to activate the laser. A red laser dot will appear.
3. Aim the laser dot at the target point.
4. Press the Power button again to take the measurement. The distance will be displayed on the screen.

Switching Units of Measurement

Press the "U" button () to cycle through available units: meters (m), feet (ft), inches (in), fractional inches, and combinations thereof.

Figure 7: Multiple Units of Measurement
The device supports various units, allowing users to switch between them easily to suit their needs.

Adjusting Reference Points

Press the Reference Point button () to switch between front and rear reference.

• Front Reference: Measurement starts from the front edge of the device. Useful when placing the device against a wall or object.
• Rear Reference: Measurement starts from the rear edge of the device. Useful when measuring from a corner or edge where the device's body is included in the measurement.

Figure 8: Front and Rear Reference Points
Select the appropriate reference point for accurate measurements depending on your starting position.

Measuring Modes

Press the Mode button () to cycle through the 9 available measuring modes:

• Distance: Standard single distance measurement.
• Area: Measures length and width to calculate area.
• Volume: Measures length, width, and height to calculate volume.
• Pythagorean-1: Calculates the third side of a right triangle from two measured sides (e.g., height from base and hypotenuse).
• Pythagorean-2: Calculates the height of an object using two hypotenuse measurements and one base measurement.
• Pythagorean-3: Calculates the height of an object using three measurements.
• Wall Area: Calculates the total area of multiple walls by measuring a common height once and then measuring the length of each wall.
• Continuous Measurement: Provides real-time distance updates as you move the device. Includes Min/Max tracking.
• Addition & Subtraction: Allows adding or subtracting multiple measurements.

Follow the on-screen prompts for each mode to input the required measurements.

Maintenance

• Cleaning: Use a soft, damp cloth to clean the device. Do not use abrasive cleaners or solvents.
• Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery: For long-term storage, charge the battery to approximately 50% every three months to prolong its lifespan.
• Laser Lens: Keep the laser emission and reception lenses clean to ensure accurate measurements.

Troubleshooting

Specifications

Warranty and Support

Elikliv products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Elikliv website. Keep your purchase receipt as proof of purchase for warranty claims.