1. Product Overview
The Thomson WS102TWH is a versatile device combining a Bluetooth 5.3 speaker with a comprehensive digital weather station. It provides real-time indoor and outdoor environmental data, weather forecasts, and timekeeping functions, alongside audio playback capabilities.
Key Features:
- Bluetooth 5.3 Speaker: Enjoy clear and stable audio streaming from your smartphone or tablet.
- Digital Weather Station: Displays indoor and outdoor temperature and humidity.
- Wireless Outdoor Sensor: Transmits external temperature and humidity data.
- Weather Forecast & Air Quality: Provides visual weather predictions and air quality indicators.
- Moon Phases: Displays current lunar phases.
- DCF Automatic Clock: Radio-controlled clock for precise time synchronization (12/24h format, date, alarm).
- FM Radio: Automatic station search with telescopic antenna for optimal reception.
- Adjustable Backlit Display: 4 levels of brightness for enhanced readability.
Components:
The package includes the main unit (Bluetooth speaker and weather station display), a wireless outdoor sensor, and a power adapter.
Figure 1: Main unit (left) and wireless outdoor sensor (right).
Figure 2: Product dimensions for the main unit and outdoor sensor.
Figure 3: Detailed view of the display and control buttons (SEL, MODE/CLOCK, VOL).
2. Setup
2.1 Powering the Main Unit
- Connect the provided power adapter to the DC input port on the back of the main unit.
- Plug the adapter into a standard electrical outlet. The display will illuminate.
2.2 Installing Batteries in the Outdoor Sensor
The outdoor sensor requires 2x AAA batteries (not included).
- Open the battery compartment on the back of the outdoor sensor.
- Insert 2 AAA batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
2.3 Outdoor Sensor Pairing
The outdoor sensor should automatically pair with the main unit once both are powered on. The outdoor temperature and humidity will appear on the main unit's display.
- Place the outdoor sensor in a sheltered location outside, away from direct sunlight and rain, to ensure accurate readings.
- Ensure the sensor is within effective transmission range of the main unit (typically up to 30 meters in open air).
Figure 4: Wireless connection between the main unit and outdoor sensor.
2.4 Initial Settings (Time, Date, Units)
The unit features DCF automatic time synchronization. If manual adjustment is needed or preferred:
- Press and hold the MODE/CLOCK button to enter time setting mode.
- Use the SEL (<) and SEL (>) buttons to adjust values.
- Press MODE/CLOCK again to confirm and move to the next setting (e.g., hour, minute, 12/24h format, year, month, day, temperature unit ℃/℉).
- Press MODE/CLOCK repeatedly until all settings are confirmed and you exit the setting mode.
3. Operation
3.1 Weather Station Functions
The display provides comprehensive weather and environmental information:
- Time and Date: Synchronized via DCF radio signal.
- Indoor Temperature & Humidity: Measured by the main unit.
- Outdoor Temperature & Humidity: Received from the wireless sensor.
- Weather Forecast: Icons indicate predicted weather conditions (e.g., sunny, cloudy, rainy).
- Air Quality: An indicator for general air quality.
- Moon Phases: Displays the current phase of the moon.
- Atmospheric Pressure: Shows current pressure readings.
Figure 5: Main unit displaying time, indoor/outdoor temperature, humidity, and weather forecast.
3.2 Bluetooth Speaker
To play audio via Bluetooth:
- Ensure the main unit is powered on.
- Activate Bluetooth on your smartphone or tablet.
- Search for available Bluetooth devices and select "THOMSON WS102TWH" to pair.
- Once paired, you can play audio from your device through the speaker.
- Adjust volume using the VOL (-) and VOL (+) buttons on the unit or from your connected device.
3.3 FM Radio
To use the FM radio function:
- Extend the telescopic antenna on the back of the unit for optimal reception.
- Press the MODE/CLOCK button repeatedly until "FM" appears on the display.
- Press and hold the SEL (<) or SEL (>) buttons to automatically scan for the next available station.
- Briefly press SEL (<) or SEL (>) to fine-tune the frequency manually.
Figure 6: Main unit with extended telescopic antenna for FM radio reception.
3.4 Clock and Alarm
The clock automatically synchronizes via DCF. To set an alarm:
- In normal time display mode, briefly press the MODE/CLOCK button to cycle through display modes until the alarm time is shown.
- Press and hold the MODE/CLOCK button to enter alarm setting mode.
- Use the SEL (<) and SEL (>) buttons to adjust the alarm hour and minute.
- Press MODE/CLOCK to confirm each setting.
- To activate/deactivate the alarm, briefly press the VOL (+) button when the alarm time is displayed. An alarm icon will appear/disappear.
3.5 Display Brightness
The display has 4 levels of adjustable brightness.
- Briefly press the dedicated brightness button (often indicated by a sun icon) on the unit to cycle through the brightness levels.
4. Maintenance
4.1 Cleaning
- Wipe the unit and sensor with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the surfaces.
- Avoid exposing the unit to excessive moisture.
4.2 Outdoor Sensor Battery Replacement
When the outdoor sensor's battery indicator appears on the main unit's display, replace the batteries:
- Open the battery compartment on the back of the outdoor sensor.
- Remove the old AAA batteries.
- Insert new 2x AAA batteries, observing correct polarity.
- Close the battery compartment. The sensor will automatically re-pair with the main unit.
Figure 7: Outdoor sensor placement for optimal performance and battery life.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No display on main unit | Power adapter not connected or faulty. | Ensure power adapter is securely connected to the unit and a working power outlet. |
| Outdoor temperature/humidity not displayed | Outdoor sensor batteries low or incorrectly installed; sensor out of range; interference. | Replace sensor batteries. Move sensor closer to the main unit. Avoid large metal objects between units. |
| Poor FM radio reception | Antenna not extended; weak signal; interference. | Fully extend the telescopic antenna. Reposition the unit for better signal. |
| Bluetooth pairing issues | Bluetooth not enabled on device; unit already paired; device too far. | Ensure Bluetooth is active on your device. Disconnect from other Bluetooth devices. Move device closer to the speaker. |
| Inaccurate temperature/humidity readings | Sensor exposed to direct sunlight, heat sources, or moisture. | Relocate the outdoor sensor to a sheltered, shaded area. Ensure proper ventilation around the main unit. |
6. Specifications
| Feature | Detail |
|---|---|
| Brand | THOMSON |
| Model | WS102TWH |
| Color | White |
| Dimensions (Main Unit) | Approximately 15 x 5 x 8 cm |
| Weight (Main Unit) | 300 g |
| Material | Wood and Plastic |
| Connectivity Technology | Bluetooth 5.3 |
| Speaker Output | 15W |
| Power Source | AC Power Cable (included) |
| Outdoor Sensor Power | 2x AAA batteries (not included) |
| FM Frequency Range | 88.0-108MHz |
| Temperature Accuracy | 0.5 ℃ |
7. Warranty and Support
This product is covered by a manufacturer's warranty. For detailed warranty information, please refer to the documentation provided with your purchase or visit the official THOMSON website.
For technical support, troubleshooting assistance, or service inquiries, please contact THOMSON customer support through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.
