1. Introduction and Overview
This manual provides detailed instructions for the assembly, operation, and maintenance of your new HONEY JOY Kids Vanity Table & Chair Set. Designed for children aged 3 and above, this set features a vanity mirror with colorful lights, ample storage, and a matching chair, creating a functional and engaging space for various activities.

Image 1.1: The HONEY JOY Kids Vanity Table & Chair Set in Bow Pink.
2. Safety Information
- Adult Assembly Required: Ensure all parts are correctly assembled by an adult before use.
- Shatterproof Mirror: The vanity is equipped with a shatterproof acrylic mirror for enhanced safety.
- Rounded Edges: All edges are smoothly rounded to minimize the risk of injury.
- Anti-Tipping Device: An anti-tipping device is included to secure the vanity to the wall, preventing accidental tipping. Always install this device.
- Battery Safety: The lighted mirror requires 2 CR2032 batteries (not included). Ensure batteries are inserted correctly and kept out of reach of small children.
- Supervision: Always supervise children during play to ensure safe use of the vanity set.

Image 2.1: Detail of the shatterproof acrylic mirror and safety compliance.
3. Package Contents
Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Vanity Desk for Kids
- Matching Chair
- User Guide (this document)
- Assembly Hardware (screws, dowels, etc.)
- Shatterproof Acrylic Mirror with LED Lights
- Storage Cabinet Door
- Drawer
- Open Bookshelf Components
4. Setup and Assembly Instructions
Follow the step-by-step instructions provided in the included user guide and refer to the assembly video for visual guidance. Ensure you have a clean, flat surface for assembly and keep small parts away from children.
Assembly Video Guide
Video 4.1: Detailed installation instructions for the Kids Vanity Table.
Key Assembly Steps:
- Unpack and Identify Parts: Lay out all wooden panels and hardware. Match them with the labels in the instruction manual.
- Assemble the Chair: Begin by assembling the chair components using the provided screws and dowels.
- Construct the Vanity Base: Follow the diagrams to connect the main desk panels, ensuring all connections are secure.
- Attach Storage Units: Secure the open bookshelf and the side storage cabinet to the main desk structure.
- Install Drawer and Door: Assemble and install the drawer and the cabinet door.
- Mount the Mirror: Carefully attach the mirror unit to the top of the vanity desk.
- Install Anti-Tipping Device: Securely fasten the anti-tipping device to the back of the vanity and to a wall stud.
5. Operating Instructions
LED Lighted Mirror
- Battery Installation: The mirror's LED lights require 2 CR2032 batteries (not included). Locate the battery compartment on the back of the mirror and insert the batteries according to the polarity markings.
- Power On/Off: Press the touch sensor on the mirror to turn the lights on or off.
- Adjust Light Settings: The mirror features multiple light settings (e.g., warm, cool, natural). Tap the touch sensor repeatedly to cycle through the available light modes.
Video 5.1: Demonstration of the vanity lights and features.
Storage Features
- Open Bookshelf: Utilize the 2-tier open bookshelf for storing books, magazines, or decorative items.
- Drawer: The convenient drawer provides enclosed storage for smaller accessories.
- Storage Cabinet: The large compartment with a door offers additional storage for toys or other items.

Image 5.2: Overview of the vanity's large storage capacity.
6. Maintenance
- Cleaning: Wipe the smooth surfaces with a damp cloth and mild soap. Avoid abrasive cleaners that may damage the finish.
- Mirror Care: Clean the acrylic mirror with a soft, lint-free cloth and a non-abrasive glass cleaner.
- Hardware Check: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.
- Avoid Moisture: Keep the vanity away from excessive moisture and direct sunlight to prevent warping or fading.
7. Troubleshooting
- Lights Not Working: Check if the batteries are correctly installed and not depleted. Replace batteries if needed. Ensure the touch sensor is clean and unobstructed.
- Loose Connections: If the vanity feels wobbly, re-tighten all assembly screws.
- Drawer/Door Sticking: Ensure the drawer and door tracks are clean and free of debris. Apply a small amount of silicone lubricant if necessary.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | HONEY JOY |
| Model Number | Kids Vanity Table & Chair Set |
| Color | Bow Pink |
| Material | MDF + Acrylic Mirror |
| Table Dimensions (L x W x H) | 34" x 15.5" x 36" (86 cm x 39.5 cm x 92 cm) |
| Tabletop Dimensions (L x W x H) | 30.5" x 15.5" x 19.5" (78 cm x 39.5 cm x 50 cm) |
| Chair Dimensions (L x W x H) | 10.5" x 10" x 19.5" (27 cm x 25 cm x 50 cm) |
| Seat Height | 11" (28 cm) |
| Weight Capacity of Tabletop | 110 lbs (50 kg) |
| Weight Capacity of Chair | 165 lbs (75 kg) |
| Suitable Age | 3+ years old |
| Mirror Type | Shatterproof Acrylic Mirror |
| Mirror Lights | Colorful LED Lights (requires 2 CR2032 batteries, not included) |
| Storage Features | 2-tier open shelf, drawer, large compartment, 2-tier bookshelf |

Image 8.1: Detailed dimensions of the HONEY JOY Kids Vanity Table & Chair Set.
9. Warranty and Support
For warranty information, product support, or to report missing/damaged parts, please contact HONEY JOY customer service directly. Refer to your purchase documentation for specific contact details or visit the official HONEY JOY store on Amazon.
Online Support: Visit the HONEY JOY Store on Amazon