FEELNEEDY FN-W17 Wireless Stainless Steel Automatic Pet Water Dispenser User Manual

1. Introduction

Thank you for choosing the FEELNEEDY FN-W17 Wireless Stainless Steel Automatic Pet Water Dispenser. This manual provides essential information for the safe and efficient use of your new pet water fountain. Please read it thoroughly before use and keep it for future reference.

Key Features:

• Visible Filter Design: Easily monitor filter status without disassembly. The filter box can be removed for cleaning.
• Wireless Convenience: Place the dispenser anywhere without power outlet restrictions. Eliminates concerns about pets chewing on cords.
• Long-lasting Battery: Equipped with a 4000mAh rechargeable battery, providing up to 45 days of continuous use in Timer Mode.
• Three Water Supply Modes: Features Sensor Mode (20 seconds water when pet approaches), Timer Mode (20 seconds water every 15 minutes), and Continuous Supply (when connected to power).
• Multi-circulation Filter & Stainless Steel Material: Multi-filter system with pump cotton ensures clean water by preventing hair and debris. Stainless steel material resists bacterial growth and is dishwasher safe.

2. Setup

Unpacking and Initial Assembly:

1. Carefully remove all components from the packaging.
2. Wash the stainless steel tray and the water tank with mild soap and water. Rinse thoroughly.
3. Insert the filter into its designated slot in the pump assembly.
4. Place the pump assembly into the water tank.
5. Fill the water tank with fresh water up to the maximum fill line.
6. Place the stainless steel tray on top of the water tank.

Image: The FEELNEEDY wireless pet water dispenser assembled and ready for use, showcasing its flexible placement options.

Charging the Battery:

Before first use, fully charge the built-in 4000mAh rechargeable battery. The control module can be easily detached for charging.

1. Detach the control module from the main unit.
2. Connect the charging cable to the charging port on the control module.
3. Plug the other end of the cable into a compatible USB power adapter (not included).
4. The indicator light will show charging status. Once fully charged, reattach the module to the dispenser.

Image: A cat drinking from the dispenser while the control module is connected to a charging cable, demonstrating the detachable battery feature.

Product Feature Overview:

3. Operation

Control Panel:

The control module on top of the dispenser features buttons for mode selection and indicator lights for power and filter replacement.

Image: A cat approaching the water dispenser, illustrating the sensor mode in action. The control panel with its buttons and indicator lights is visible.

Water Supply Modes:

Press the mode button on the control module to cycle through the following options:

• Sensor Mode: Water dispenses for 20 seconds when a pet is detected nearby. This mode conserves battery life.
• Timer Mode: Water dispenses for 20 seconds every 15 minutes. This mode is ideal for regular hydration and extends battery life up to 45 days.
• Continuous Supply: Water flows continuously when the dispenser is connected to a power source.

Image: A visual representation of the three operating modes: Sensor Mode, Timer Mode, and Continuous Mode, with descriptions of each.

Water Level Indicator:

The dispenser features a visible water level window on the front, allowing you to easily monitor the remaining water volume.

Image: A close-up of the water dispenser's visible water level window, showing how to check the water volume at a glance.

Emergency Water Tray:

In case of power outage or low battery, the dispenser includes an emergency water tray that holds approximately 300ml of water, ensuring your pet always has access to drinking water.

Image: A cat drinking from the emergency water tray, highlighting its function during power interruptions.

4. Maintenance

Regular cleaning and filter replacement are crucial for maintaining water quality and extending the life of your dispenser.

Cleaning the Dispenser:

The stainless steel components are dishwasher safe. For manual cleaning:

1. Disassemble the dispenser by removing the stainless steel tray and the pump assembly.
2. Wash the stainless steel tray and the water tank with mild soap and water. Rinse thoroughly.
3. Clean the pump according to the instructions below.
4. Ensure all parts are dry before reassembling.

Image: A person cleaning the stainless steel tray under running water, demonstrating the ease of cleaning the dispenser's components.

Pump Cleaning Procedure:

Regular cleaning of the pump is essential to prevent blockages and ensure proper water circulation.

1. Remove the pump from the dispenser.
2. Remove the sponge filter from the pump.
3. Carefully remove the pump cover.
4. Use the provided small brush to clean the impeller and all internal parts of the pump under running water.
5. Reassemble the pump components.

Filter Replacement:

The dispenser uses a multi-stage filter system to purify water. The filter replacement indicator light on the control module will alert you when it's time to change the filter. It is recommended to replace the filter every 2-4 weeks, depending on usage and water quality.

1. Remove the stainless steel tray.
2. Remove the old filter from the pump assembly.
3. Rinse the new filter under running water before placing it into the pump assembly.
4. Reassemble the dispenser.

Image: An exploded view illustrating the different layers of the multi-stage filter, highlighting its purification capabilities.

5. Specifications

6. Troubleshooting

If you encounter any issues with your FEELNEEDY pet water dispenser, please refer to the following common problems and solutions:

• No water flow:
  • Check if the water tank has sufficient water.
  • Ensure the pump is properly installed and not blocked by debris or pet hair. Clean the pump as described in the Maintenance section.
  • Verify the battery is charged or the unit is connected to power if using Continuous Supply mode.
• Water tastes or smells bad:
  • Replace the filter.
  • Clean the entire dispenser, including the tank, tray, and pump.
  • Use fresh, clean water.
• Indicator lights not working:
  • Ensure the control module is securely attached and the battery is charged.
  • If the issue persists, contact customer support.
• Unit not responding to pet in Sensor Mode:
  • Ensure the sensor is clean and unobstructed.
  • Check if the unit is in Sensor Mode.

7. Warranty & Support

Warranty Information:

This FEELNEEDY pet water dispenser comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, or unauthorized modifications.

Customer Support:

For any questions, concerns, or warranty claims, please contact FEELNEEDY customer support:

• Email: support@feelneedy.com
• Website: Visit the official FEELNEEDY store on Amazon for FAQs and additional resources.