fishkeeper Nano Aquarium Set - Model FK119-N Instruction Manual

1. Introduction

The fishkeeper Nano Aquarium Set (Model FK119-N) is a compact, all-in-one solution designed for ease of use and optimal aquatic environment management. This 9-liter (2.3 gallon) aquarium features integrated LED lighting with a timer, a multi-functional pump and filter system, a humidifier, and a smart touch screen for intuitive control. Its elegant design and comprehensive features make it suitable for beginners and experienced aquarists alike.

Image: The fishkeeper Nano Aquarium Set, fully assembled with fish and aquatic plants, highlighting its compact size and integrated features.

2. Package Contents

Before beginning setup, please ensure all components are present and undamaged. The package should include:

• 1x 9-liter (2.3 Gallon) Fish Tank
• 3x Artificial Aquatic Plants
• 1x Water Pump
• 1x Replacement Filter Sponge
• 2x 5V Power Adapters
• Integrated LED Light System
• Integrated Humidifier
• Integrated Touch Screen Control Panel

Image: A visual representation of all items included in the fishkeeper Nano Aquarium Set package.

3. Setup Instructions

Follow these steps to set up your fishkeeper Nano Aquarium:

1. Unpack and Inspect: Carefully remove all components from the packaging. Inspect the aquarium and accessories for any damage.
2. Choose a Location: Place the aquarium on a flat, stable surface away from direct sunlight, heat sources, and drafts. Ensure the surface can support the weight of the filled aquarium (approximately 12.5 kg or 27.5 lbs when full).
3. Rinse Components: Rinse the aquarium, artificial plants, and filter sponge thoroughly with clean water. Do not use soap or detergents.
4. Install Filter and Pump: The pump and filter system are pre-installed. Ensure the filter sponge is correctly seated within the pump housing.
5. Add Substrate and Decorations: If using your own substrate (gravel, sand), rinse it thoroughly before adding it to the tank. Arrange the artificial plants and any other decorations.
6. Fill with Water: Slowly fill the aquarium with dechlorinated water to the recommended level. Use a water conditioner to remove chlorine and chloramines.
7. Connect Power: Connect the 5V power adapters to the appropriate ports on the aquarium unit and then plug them into a power outlet.
8. Initial Cycle: Allow the aquarium to run for at least 24-48 hours before introducing any fish. This allows the filter to begin establishing beneficial bacteria. For a proper nitrogen cycle, refer to advanced aquarium cycling guides.

Image: The fishkeeper Nano Aquarium highlighting its all-in-one design for easy setup.

4. Operating Instructions

4.1. Touch Screen Control Panel

The aquarium features an intuitive touch screen panel for controlling various functions. The display shows water temperature and allows control of lighting and humidifier settings.

Image: The LED touch control panel displaying water temperature and control options for light and humidifier.

4.2. LED Lighting

The integrated RGB 5050 LED lighting offers 8 vibrant colors and adjustable brightness (0-100%).

• Color Selection: Tap the light icon on the touch screen to cycle through the 8 available colors or activate the 7-color auto-cycle mode.
• Brightness Adjustment: Use the dimming function via the touch screen to set the desired light intensity.
• Timer Function: Set individual lighting schedules from 1 to 23 hours. This automatic day-night rhythm promotes fish health and eliminates manual on/off operations.

Image: Close-up of the vibrant RGB LED beads, illustrating the quality of light provided.

Image: Illustration of the stepless dimming capability, demonstrating various brightness levels.

Image: The automatic light timer interface, allowing users to set daily lighting schedules.

4.3. Humidifier Function

The integrated humidifier features a separate water zone and three operating modes for optimal indoor climate. This compartment can also be used for aromatherapy.

• Modes: Select between P1 (gentle interval), P2 (fast mist), and P3 (continuous flow) via the touch screen.
• Aromatherapy: Add water or essential oils to the dedicated humidifier compartment for aromatherapy benefits.
• Duration: The humidifier can operate for up to 4 hours.

Image: The smart mist and aroma diffuser feature, illustrating its three modes and the refill point.

4.4. Feeding

The aquarium includes a convenient feeding slot integrated into the lid. Lift the cover and add fish food as needed. Ensure not to overfeed.

Image: A hand adding fish food into the designated feeding slot on the aquarium lid, visible in the inset of the touch screen control panel image.

5. Maintenance

Regular maintenance is crucial for a healthy aquatic environment, even with the self-cleaning features.

5.1. 4-in-1 Self-Cleaning Circulation Ecosystem

The multi-functional pump integrates filtration, ventilation, gentle water movement, and circulation. This system helps minimize maintenance by absorbing impurities from the bottom and providing a rainfall filter outlet.

• Filtration: The filter sponge removes physical debris from the water.
• Oxygenation: The oxygen bubble outlet ensures adequate aeration for your fish. The bubble flow can be adjusted.
• Circulation: Gentle water movement prevents stagnant areas and distributes heat and nutrients.

Image: An illustration detailing the components and functions of the 4-in-1 self-cleaning circulation ecosystem.

5.2. Filter Sponge Cleaning and Replacement

The filter sponge should be rinsed weekly during water changes and replaced every 2-4 weeks, depending on the bioload of your aquarium. Rinse the sponge in old aquarium water to preserve beneficial bacteria.

5.3. Water Changes

Perform a partial water change (20-30% of the tank volume) weekly. This removes nitrates and replenishes essential minerals. Always use dechlorinated water at a similar temperature to the aquarium water.

5.4. Aquarium Cleaning

Wipe down the inside and outside of the aquarium glass as needed to remove algae and water spots. Use an aquarium-safe cleaning tool for the inside. Avoid using household cleaners on or near the aquarium.

6. Troubleshooting

7. Product Specifications

• Brand: fishkeeper
• Model Number: FK119-N
• Material: High-quality Scratch-resistant Glass (4mm thick)
• Tank Volume: 9 Liters (2.3 Gallons)
• Dimensions (L x W x H): 30.5 cm x 14.7 cm x 25 cm (12 in x 5.7 in x 10 in)
• Item Weight: 3.5 Kilograms (7.7 lbs)
• Shape: Octagonal
• Special Features: Self-cleaning, LED lighting with timer, Humidifier, Touch screen control
• Included Components: Filter, LED, Air Pump
• Style: Smart
• Color: Ferrous (Black)
• Light Transmission: 91.3%

8. Warranty and Support

The fishkeeper Nano Aquarium Set (Model FK119-N) comes with a 2-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact fishkeeper customer service through the retailer where you purchased the product or visit the official fishkeeper website for contact information.

Please retain your proof of purchase for warranty validation.