Introduction
The Viconor Red Light Therapy device is designed to provide targeted light therapy for the feet and other body areas. It utilizes a combination of 660nm red light and 850nm near-infrared (NIR) light, which penetrates muscle layers. This device is intended for individuals seeking to address stiffness and promote relaxation.

This image illustrates the primary benefits of the Viconor Red Light Therapy device, including easing foot pain, supporting ankle health, enhancing circulation, and promoting restful sleep.
What's Included
Please verify that all components are present in your package:
- Red Light Therapy Device (Foot Boot)
- Wired Controller
- Power Adapter
- User Manual
- Protective Goggles

The product package includes the Viconor Red Light Therapy device, a wired controller, a power adapter, a user manual, and protective goggles.
Setup
- Unpack all components from the box.
- Connect the power adapter to the device's input port and then plug the adapter into a standard electrical outlet.
- Ensure the wired controller is securely connected to the device.
- Before operating, put on the provided protective goggles to shield your eyes from the bright red light.

Ensure the controller and power adapter are correctly connected to the device before use.
Operating Instructions
The device features a wired controller for adjusting therapy settings.
Power On/Off
- To turn on the device, press and hold the power button on the controller for 3-5 seconds.
- To turn off the device, press and hold the power button again for 3-5 seconds.
Setting the Timer
The device allows you to set a therapy duration from 0 to 30 minutes.
- Use the 'Set Time' buttons on the controller to adjust the desired session length.
- The selected time will be displayed on the controller's screen.

The controller features a screen to display time, buttons to select mode, power on/off (long press), and adjust the therapy duration.
Adjusting Intensity Levels
The device offers 5 energy intensity levels, including a pulse mode.
- Use the 'Select Mode' buttons on the controller to cycle through the intensity levels.
- Choose the level that best suits your comfort and therapy needs.

The device offers 5 distinct energy intensity levels, from 7W (25%) to 27W (100%), including a pulse mode, allowing for personalized therapy.
| Level | Power Lamp | Condition | Temperature | Energy Absorbed |
|---|---|---|---|---|
| 1 | 7W | Always bright | 97°F | 25% |
| 2 | 14W | Always bright | 109°F | 50% |
| 3 | 20W | Always bright | 110°F | 75% |
| 4 | 27W | Always bright | 130°F | 100% |
| 5 | 17W | Flashing | 104°F | Pulse Mode |
A detailed breakdown of the 5 intensity levels, including power, condition, temperature, and energy absorption.
Versatile Use
The Viconor Red Light Therapy device features a detachable design, allowing it to be used beyond just foot therapy. It can be unzipped and laid flat or wrapped around various body parts for targeted application.
- Feet and Ankles: Use in the boot form for comprehensive foot and ankle coverage.
- Waist: Detach and wrap around the waist area.
- Back/Shoulder: Apply to the back or shoulder for localized therapy.
- Legs: Lay flat or wrap around the legs.

The versatile design allows the device to be used as a foot boot or detached and wrapped around other body areas like the back, waist, or legs for targeted therapy.
Dual-Wavelength Technology
The device integrates a 3-in-1 dual-wavelength chip design for enhanced therapeutic outcomes.
- 660nm Red Light: Visible red light, with 200 LEDs.
- 850nm Near-Infrared (NIR) Light: Invisible light, with 400 LEDs.

The device incorporates a 3-in-1 dual-wavelength chip design, featuring 200 visible 660nm red light LEDs and 400 invisible 850nm Near-Infrared (NIR) light LEDs for comprehensive therapy.
Maintenance
Proper care ensures the longevity and performance of your device.
- Cleaning: The device is made of high-quality, waterproof, and anti-scratch leather, making it easy to clean. Wipe the surface with a damp cloth as needed. Do not submerge the device in water.
- Storage: The zipper removable design allows for easy storage. Fold the device compactly when not in use to save space. Store in a cool, dry place away from direct sunlight.

Constructed from high-quality, waterproof leather with a convenient zipper, the device is easy to clean, maintain, and store, making it ideal for travel.
Specifications
| Feature | Detail |
|---|---|
| Model | B0FV3WPJ7K |
| Light Wavelengths | 660nm (Red Light), 850nm (Near-Infrared Light) |
| LED Count | 200 (660nm), 400 (850nm) - Total 600 LEDs |
| Intensity Levels | 5 (including Pulse Mode) |
| Timer Settings | 0-30 minutes |
| Material | High-quality, waterproof, anti-scratch leather |
| Power Supply | Wall power adapter (included), Viconor Power Bank (optional, not included) |
| Package Dimensions | 15.63 x 9.96 x 2.13 inches |
| Item Weight | 1.9 pounds |

The device can be powered via the included wall adapter or an optional Viconor Power Bank (not included) for portable use.

The device measures 10.6 x 11.8 x 10.6 inches in foot boot form, 10.6 x 1.6 x 10.6 inches when folded, and 36.6 x 9.8 inches when laid flat.
Safety Information
Please read and follow all safety instructions before using the device.
- Always wear the provided protective goggles during operation to protect your eyes from direct light exposure.
- Do not use the device on broken skin, open wounds, or areas with active infections.
- Consult a healthcare professional before use if you have any medical conditions, are pregnant, or are taking photosensitive medications.
- Keep out of reach of children and pets.
- Do not modify or attempt to repair the device yourself. Contact customer support for assistance.
- This device is not intended to diagnose, treat, cure, or prevent any disease or health condition.
Troubleshooting
If you encounter any issues with your Viconor Red Light Therapy device, please refer to the following common solutions:
- Device not turning on: Ensure the power adapter is securely connected to both the device and a working electrical outlet. Check if the power button on the controller is pressed and held for 3-5 seconds.
- Lights not illuminating: Verify that the device is powered on and the intensity level is set above zero. Ensure all connections are firm.
- Controller not responding: Disconnect and reconnect the controller. If the issue persists, ensure the power supply is stable.
For further assistance, please contact Viconor customer support.
Warranty and Support
Viconor products are designed for quality and reliability. For information regarding warranty coverage, product support, or any questions not covered in this manual, please refer to the contact information provided with your purchase or visit the official Viconor website.