1. Introduction
This manual provides essential information for the proper installation, use, and maintenance of your Soozier Trampoline Spring Cover. Please read these instructions carefully before installation to ensure safe and effective use of the product. This spring cover is designed to enhance safety by covering the trampoline springs and frame.
2. Safety Information
- The trampoline spring cover is designed to prevent direct contact with the trampoline springs and frame, reducing the risk of pinches and scrapes.
- Always ensure the spring cover is securely attached to the trampoline frame before use.
- Regularly inspect the spring cover for any signs of wear, tear, or damage. Replace immediately if damage is found to maintain safety.
- This product is an accessory for trampolines and does not replace the need for adult supervision during trampoline use.
3. Product Overview
The Soozier Trampoline Spring Cover is constructed from durable, weather-resistant materials to provide long-lasting protection. It features a thick EPE foam padding designed for shock absorption and safety.
Image 3.1: Soozier Blue Trampoline Spring Cover.
Image 3.2: Cross-section illustrating the material layers: 500D Plastic, 15mm EPE Foam, and 128g/m² PE, providing tear-resistance, safe protection, water-resistance, and UV-resistance.
Key Features:
- Material Composition: 500D faux leather and 128g/m² PE for durability.
- Padding: Thick EPE foam for enhanced safety and shock absorption.
- Weather Resistance: Waterproof and sun-proof design to withstand outdoor elements.
- Easy Installation: Attaches with elastic straps, requiring no special tools.
4. Setup and Installation
Follow these steps to properly install your trampoline spring cover:
- Measure Your Trampoline: Before installation, ensure you have the correct size spring cover for your trampoline. Measure the diameter of your trampoline's steel frame (do not measure the jumping mat). This cover is suitable for 12FT (366cm) or 14FT round trampolines.
- Unfold the Cover: Carefully unfold the spring cover and position it over the trampoline springs and frame.
- Secure with Elastic Straps: Locate the elastic straps on the underside of the spring cover. Loop these straps around the trampoline frame or spring hooks and secure them tightly. Work your way around the entire circumference of the trampoline, ensuring all straps are fastened.
- Verify Security: Once all straps are secured, gently pull on the cover to ensure it is firmly in place and does not shift easily. The springs and frame should be completely covered.
Image 4.1: Guide for measuring your trampoline's diameter to ensure proper fit.
Image 4.2: Close-up of a hand securing the trampoline spring cover to the frame using an elastic strap.
5. Operating Instructions (Usage)
The Soozier Trampoline Spring Cover functions as a protective barrier. Once installed, it allows for safe use of the trampoline by covering the exposed springs and metal frame. Ensure the cover remains in place during all trampoline activities. It is designed to be left on the trampoline for continuous protection.
Image 5.1: A trampoline equipped with the blue spring cover, safety net, and ladder, ready for use.
6. Maintenance
To ensure the longevity and effectiveness of your Soozier Trampoline Spring Cover, follow these maintenance guidelines:
- Cleaning: Clean the surface of the spring cover regularly with a damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with a damp cloth and air drying. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically inspect the cover for any signs of wear, tears, fading, or damage to the elastic straps.
- Storage: If storing the trampoline for an extended period, it is recommended to remove the spring cover, clean it, and store it in a dry, shaded area to prolong its life.
7. Troubleshooting
If you encounter issues with your trampoline spring cover, consider the following:
- Cover Does Not Fit: Verify that you have purchased the correct size cover for your trampoline's diameter. Refer to Section 4.1 for measurement instructions.
- Cover Shifts During Use: Ensure all elastic straps are securely fastened and taut. Re-tighten any loose straps.
- Damage or Wear: If the cover shows significant damage, such as large tears or exposed foam, it should be replaced immediately to maintain safety. Small tears may be repaired with appropriate outdoor fabric repair kits.
8. Specifications
| Brand | Soozier |
| Model Name | Trampoline Replacement Pad |
| Model Number | USA00-023V02BU0131 |
| Material | Plastic, PE, EPE Foam |
| Color | Blue |
| Frame Size Compatibility | 12 Feet (also available for 14 Feet) |
| Shape | Round |
| Product Dimensions (12FT) | 144"L x 144"W x 0.5"H (11.75" W pad) |
| Item Weight | 6 Pounds |
| Included Components | Elastic straps |
Image 8.1: Top-down view of the 12FT (144 inch diameter) spring cover, showing its width of 11.75 inches.
9. Warranty and Support
This Soozier Trampoline Spring Cover comes with a 1 Year Warranty Against Manufacturer Defects. Please retain your proof of purchase for warranty claims.
For product support, questions, or warranty inquiries, please contact the manufacturer, Aosom LLC, or refer to the retailer's customer service channels. When contacting support, please provide your model number (USA00-023V02BU0131) and details of your issue.
