1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Dystler Nightstand with an integrated charging station and adjustable LED lighting. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Image 1.1: The Dystler Nightstand in a bedroom environment, showcasing its design, LED lighting, and charging capabilities.
2. Safety Information
- Ensure all components are present and undamaged before beginning assembly.
- Assemble the nightstand on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly to avoid damaging the material.
- Keep small parts away from children during assembly.
- Only use the provided power cord and ensure it is connected to a suitable power outlet.
- Do not expose the charging station or LED lights to water or excessive moisture.
- Do not exceed the maximum weight recommendation of 50 pounds on the tabletop.
3. Package Contents
Verify that all the following components are included in your package:
- Dystler Nightstand (main unit) x 1
- Assembly Guide x 1
- Installation Tool x 1 (typically an Allen wrench)
- Hardware Pack (screws, dowels, etc.)
If any parts are missing or damaged, please contact customer support.
4. Assembly Instructions
The Dystler Nightstand is designed for straightforward assembly. Please follow the included Assembly Guide step-by-step. All parts are labeled for easy identification. A basic screwdriver may also be required in addition to the provided installation tool.
Key assembly points:
- Identify all parts and hardware before starting.
- Attach drawer slides carefully, ensuring they are correctly oriented. The ball-bearing drawer glides are designed for quiet operation.
- Connect the LED light strip and charging station wiring as indicated in the guide.
Image 4.1: Product dimensions, including overall width, depth, height, and drawer interior measurements.
Image 4.2: Detail of the high-capacity storage drawer and the smooth ball-bearing drawer glide system.
5. Operating Instructions
5.1. Integrated Charging Station
The nightstand features a built-in power hub for convenient charging of your electronic devices. It includes:
- 2 AC Outlets
- 1 USB Port
- 1 Type-C Port
To use, simply plug the nightstand's main power cord into a wall outlet. Then, connect your devices to the appropriate ports on the charging station located on the tabletop.
Image 5.1: The integrated charging station on the nightstand's surface, providing power for various electronic devices.
5.2. Adjustable LED Lighting
The nightstand includes an LED light strip with adjustable settings to create your desired ambiance.
- Color Options: The LED light offers three distinct color modes: White Light, Warm Light, and Blue Light.
- Changing Colors: Short click the light button to cycle through the available color modes.
- Adjusting Brightness: Long press the light button to steplessly adjust the brightness from 10% to 100%. Release the button when the desired brightness level is reached.
Image 5.2: Visual representation of the three LED light color options and the method for adjusting brightness.
6. Maintenance
To maintain the appearance and longevity of your Dystler Nightstand, follow these simple care instructions:
- For general cleaning, wipe the surfaces with a soft, dry cloth.
- For spills or stubborn marks, use a slightly damp cloth and then immediately wipe dry.
- Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
- Keep the nightstand away from direct sunlight and extreme temperature changes to prevent material warping or fading.
7. Troubleshooting
If you encounter any issues with your Dystler Nightstand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not turning on. | Power cord not plugged in; loose connection; faulty LED strip. | Ensure the nightstand's power cord is securely plugged into a working wall outlet. Check all LED connections. If the issue persists, contact customer support. |
| Charging station not working. | Power cord not plugged in; device not properly connected; faulty charging module. | Verify the nightstand is powered. Ensure devices are correctly plugged into the charging ports. Test with different devices. |
| Drawers are stiff or do not slide smoothly. | Improper assembly of drawer slides; obstruction in the slide mechanism. | Review the assembly guide for correct drawer slide installation. Check for any foreign objects obstructing the glides. |
For issues not listed above, please contact Dystler customer support.
8. Specifications
| Brand: | Dystler |
| Model Number: | LY-91107-26 |
| Product Dimensions (D x W x H): | 15.75" x 25.59" x 23.62" |
| Item Weight: | 46.3 Pounds |
| Maximum Weight Recommendation: | 50 Pounds |
| Material Type: | Engineered Wood (MDF) |
| Number of Drawers: | 2 |
| Charging Station: | 2 AC Outlets, 1 USB Port, 1 Type-C Port |
| LED Lighting: | 3-Color (White, Warm Yellow, Blue), Adjustable Brightness |
| UPC: | 720314431917 |
9. Warranty and Support
Dystler products are manufactured with quality and customer satisfaction in mind. For specific warranty details, please refer to the documentation included with your purchase or visit the official Dystler website.
If you require assistance with assembly, operation, or troubleshooting, please contact Dystler customer support. Have your model number (LY-91107-26) and purchase information ready when contacting support.
For the latest information and support resources, please visit the Dystler Store on Amazon.
