Softa Twin XL Adjustable Bed Frame S1 with 6-inch Gel Memory Foam Mattress - User Manual

1. Important Safety Information

Please read and understand all safety instructions before assembly and operation. Failure to follow these instructions may result in injury or product damage.

• Do not exceed the maximum weight capacity of 600 lbs.
• Be cautious of non-adjustable legs to prevent tripping hazards.
• Handle all components with care during assembly and setup to avoid injury.
• Ensure all power cords are clear and do not interfere with any adjustable bed mechanisms.

2. Product Overview

The Softa Twin XL Adjustable Bed Frame Model S1 is designed to enhance your sleep and comfort. It features independent head and foot adjustments, a quiet motor, and a durable construction. This product includes the adjustable bed base. The 6-inch Gel Memory Foam Mattress is designed for optimal comfort and support.

Key Features:

• Simultaneous Head and Foot Adjustment: Headrest elevates up to 60 degrees, footrest up to 20 degrees.
• Whisper-Quiet & Durable Motor: High-performance motor tested for 10,000 cycles, ensuring long-term reliability.
• Sturdy Construction: Features a robust steel frame and an eight-legged design, supporting up to 600 lbs.
• Easy Assembly: Designed for quick and stress-free setup with easy-to-handle sections.
• Wide Mattress Compatibility: Works with most mattress types including memory foam, gel foam, latex, and hybrid.
• Health Benefits: Supports better sleep by helping relieve snoring, easing back pain, reducing swelling, and improving breathing.

Mattress Construction:

• Viscose From Bamboo
• 100% Cotton Fire-Resistant Rib Fabric
• Gel Memory Foam
• Resilient Foam
• Support Foam
• Fire-Resistant Rib Fabric

3. Components List

Before beginning assembly, ensure all parts are present and accounted for. Refer to the diagram below.

• Adjustable Bed Frame (Main Unit)
• Wireless Remote Control
• Power Cord
• Transformer Power Supply
• Legs (6 pieces)
• Mattress Retainer Bar

4. Setup and Assembly

Follow these steps for a quick and easy assembly of your Softa adjustable bed frame.

1. Unpack and Position: Carefully remove all components from the packaging. Place the folded bed frame upside down on a clean, flat surface.
2. Connect Power Supply: Extend the input power cord and plug it into the transformer power supply. Connect the transformer power supply to the control box located on the underside of the bed frame.
3. Unfold Side Rails: Unfold the side rails on both sides of the frame and press them firmly against the Velcro to secure.
4. Install Legs: Screw the six legs firmly into the threaded holes on each corner and along the center of the adjustable base.
5. Flip the Frame: With the help of another person, carefully flip the bed frame over so it rests on its legs. Ensure all power cords are clear and do not interfere with any adjustable bed mechanisms.
6. Install Mattress Retainer Bar: Carefully insert the mattress retainer bar into the two holes at the foot end of the bed base.
7. Place Mattress: Position your 6-inch Gel Memory Foam Mattress onto the assembled adjustable bed frame.
8. Synchronize Remote Control: Insert batteries into the remote control. Locate the red circle button on the control box mounted under the bed. Hold this button for 3 seconds after plugging in the adjustable bed. The light will flash quickly. Then, press any key on the remote control. When the light stops flashing, the match is successful.

Assembly Video:

5. Operating Instructions

Your Softa adjustable bed frame comes with a wireless remote control for easy adjustment of your sleeping and lounging positions.

Remote Control Functions:

• Head Up/Down: Adjusts the head section of the bed.
• Foot Up/Down: Adjusts the foot section of the bed.
• Zero Gravity (ZG): A pre-set position that elevates both the head and feet to relieve pressure and promote circulation.
• Anti-Snore: A pre-set position that slightly elevates the head to help reduce snoring.
• Flat: Returns the bed to a completely flat position.
• Memory Presets (M1, M2): Allows you to save and recall your favorite custom positions.

Operation Video:

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your adjustable bed frame and mattress.

• Cleaning the Frame: Wipe the metal frame with a damp cloth and mild detergent. Avoid abrasive cleaners.
• Mattress Care: The 6-inch Gel Memory Foam Mattress should be spot cleaned with a mild detergent and allowed to air dry. Do not saturate the mattress.
• Motor and Electronics: Keep the motor and electronic components free from dust and moisture. Do not attempt to open or service the motor or control box yourself.
• Cord Management: Periodically check all power cords and connections to ensure they are secure and undamaged. Keep cords away from moving parts.
• Regular Inspection: Inspect the bed frame and legs regularly for any signs of wear or damage. Tighten any loose screws if necessary.

7. Troubleshooting

If you encounter any issues with your adjustable bed frame, refer to the following common troubleshooting steps:

8. Specifications

9. Warranty and Support

Your Softa 6-inch Gel Memory Foam Mattress comes with a 10-Year Warranty, ensuring peace of mind regarding its quality and durability.

For any questions, concerns, or warranty claims, please contact Softa customer support through the retailer where you purchased the product or visit the official Softa website for assistance.