Introduction
Thank you for choosing the HOMCOM Rectangular Glass Dining Table. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new table. Please read these instructions carefully before assembly and retain them for future reference. This table features an 8mm tempered glass top and robust metal legs, designed for both durability and modern aesthetic appeal, comfortably seating up to 6 people.
Safety Instructions
- Read All Instructions: Before assembly and use, carefully read and understand all instructions provided in this manual.
- Assembly: Assembly should be performed by at least two adults. Ensure all parts are present and undamaged before beginning.
- Stable Surface: Always assemble the table on a clean, flat, and soft surface (e.g., a carpet) to prevent scratches to the glass top or other components.
- Weight Limit: Do not exceed the maximum weight capacity of 80 kg (176 lbs). Distribute weight evenly across the tabletop.
- Glass Care: The tabletop is made of tempered glass. While durable, avoid striking it with hard or sharp objects, as this can cause breakage.
- Secure Connections: Periodically check and tighten all screws and bolts to ensure the table remains stable.
- Children Safety: Keep children away from the assembly area. Do not allow children to climb on or play under the table.
- Moving the Table: When moving the table, always lift it rather than dragging it to prevent damage to the legs or floor.
Package Contents
Please verify that all components are present and undamaged before proceeding with assembly. If any parts are missing or damaged, please contact customer support.
- 1 x Tempered Glass Tabletop
- 4 x Metal Legs
- 1 x Hardware Pack (screws, washers, Allen key)
- 1 x Instruction Manual
Assembly Instructions
Assembly requires two people. Please follow these steps carefully.
- Prepare the Area: Clear a spacious area and lay down a soft blanket or carpet to protect the glass tabletop during assembly.
- Unpack Components: Carefully unpack all parts and hardware. Identify each component using the parts list.
- Attach Legs to Tabletop: Gently place the tempered glass tabletop upside down on the protected surface. Align the mounting plates of the metal legs with the pre-drilled holes on the underside of the tabletop.
- Secure Legs: Using the provided screws and Allen key, attach each leg securely to the tabletop. Do not overtighten the screws initially; tighten them fully once all legs are in place.
- Final Tightening: Once all legs are attached, carefully flip the table upright with the help of another person. Ensure the table is stable and then fully tighten all screws.
- Inspect: Check that the table is level and stable. Adjust leg levelers if necessary (if included).
Operating Instructions (Usage)
Your HOMCOM dining table is designed for versatile use in dining rooms, kitchens, or living areas.
- Seating Capacity: The table comfortably accommodates up to 6 people, making it suitable for family meals or gatherings.
- Placement: Place the table on a flat, stable surface. Avoid placing it in direct sunlight for prolonged periods to prevent potential discoloration or material degradation over time.
- Even Weight Distribution: Always distribute items evenly across the tabletop to maintain stability and prevent stress on the glass.
- Hot Items: Use placemats or coasters under hot dishes to protect the glass surface from thermal shock, although tempered glass is generally resistant.
Maintenance and Care
Proper care will extend the life and appearance of your dining table.
- Cleaning the Glass Top: Wipe the tempered glass tabletop with a soft, damp cloth. For stubborn marks, use a mild glass cleaner and then wipe dry with a lint-free cloth to avoid streaks. Avoid abrasive cleaners or scouring pads.
- Cleaning Metal Legs: Clean the metal legs with a soft, damp cloth. Dry immediately to prevent water spots or rust.
- Stain Resistance: The table is designed to be stain-resistant. However, promptly wipe up spills to prevent any potential long-term marks.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten as necessary.
- Avoid Harsh Chemicals: Do not use harsh chemicals, solvents, or polishes on any part of the table, as these can damage the finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Loose screws; uneven floor | Tighten all assembly screws. Adjust leg levelers if present, or place shims under legs on uneven floors. |
| Scratches on glass top | Sharp objects; abrasive cleaning | Use placemats and coasters. Avoid dragging objects across the surface. Clean with soft cloths only. Minor scratches may be polished with specialized glass scratch removers. |
| Difficulty assembling | Incorrect alignment; missing hardware | Review assembly steps and diagrams. Ensure parts are correctly oriented. Contact customer support if hardware is missing. |
Product Specifications
| Feature | Detail |
|---|---|
| Model Number | 835-479V01WT |
| Overall Dimensions (L x W x H) | 140 x 80 x 75 cm (55.1 x 31.5 x 29.5 inches) |
| Product Weight | 27.5 kg (60.6 lbs) |
| Maximum Load Capacity | 80 kg (176 lbs) |
| Tabletop Material | 8mm Tempered Glass |
| Frame/Leg Material | Powder-Coated Metal |
| Color | White |
| Seating Capacity | 6 Persons |
| Assembly Required | Yes (2 persons recommended) |
| Indoor/Outdoor Use | Indoor Use Only |
Warranty Information
Specific warranty details for this product may vary by region and retailer. Please refer to the purchase documentation or contact your point of sale for information regarding warranty coverage and terms.
Customer Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact HOMCOM customer service or your retailer. Have your model number (835-479V01WT) and purchase details ready for faster service.
