1. Introduction
Thank you for choosing the CARHEV 7000A Jump Starter. This device is designed to provide a powerful and reliable solution for starting vehicles with dead batteries, serving as a portable power bank, and offering an emergency LED light. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image 1.1: The CARHEV 7000A Jump Starter connected to a car battery, ready to start the vehicle.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the device and vehicle:
- Read all instructions before using the jump starter.
- Wear eye protection and protective clothing when working with batteries.
- Keep the device away from children.
- Do not short-circuit the jump starter clamps.
- Do not expose the device to rain, water, or extreme temperatures.
- Ensure proper polarity connection (red clamp to positive, black clamp to negative) to avoid damage.
- Do not attempt to jump start a frozen battery.
- If the vehicle does not start after 3 attempts, discontinue use and check for other issues.
3. Package Contents
Upon unpacking, please verify that all items listed below are included:
- CARHEV Jump Starter Unit
- Smart Jump Cables with Clamps
- USB Charging Cables
- Storage Bag
- User Manual

Image 3.1: The CARHEV Jump Starter, smart cables, USB cables, storage bag, and user manual included in the package.
4. Product Features and Components
The CARHEV Jump Starter is equipped with multiple features for versatility and ease of use:
- Powerful Jump Starter: Delivers up to 7000A peak current, capable of starting 10.0L gasoline and 10.0L diesel engines.
- Smart Protection: Features 10 integrated safety protections against sparks, reverse polarity, over-current, over-charge, etc.
- Portable Power Bank: 26800 mAh capacity with USB-C input (9V/2A) and two USB outputs (including one fast charge port) for charging mobile devices.
- 3-in-1 LED Light: Includes flashlight, strobe, and SOS modes for emergencies.
- Durable Design: Reinforced plastic casing with rubber corners for shock resistance.
- LED Display: Intuitive screen to show battery level and operational status.

Image 4.1: Detailed view of the jump starter showing the power button, battery level indicator, 5V/2A output, 9V/2A QC3.0 output, 9V/2A input, jump starter socket, and LED flash light.
5. Setup and Charging
5.1 Initial Charge
Before first use, fully charge the CARHEV Jump Starter. Connect the provided USB charging cable to the USB-C input port (9V/2A) on the device and to a suitable USB power adapter (not included). The LED display will show the charging progress. A full charge is indicated when the display shows 100%.
5.2 Checking Battery Level
Press the power button once to check the current battery level on the LED display. It is recommended to keep the jump starter charged above 50% for optimal performance, especially before jump starting a vehicle.
6. Operating Instructions
6.1 Jump Starting a Vehicle
Follow these steps carefully to jump start your vehicle:
- Step 1: Connect Jump Cables to Jump Starter. Insert the blue plug of the smart jump cables into the jump starter socket. Ensure a firm connection.
- Step 2: Connect Clamps to Car Battery. Attach the red clamp to the positive (+) terminal of the car battery and the black clamp to the negative (-) terminal. The smart cables will indicate a correct connection.
- Step 3: Start the Car Engine. Once the clamps are correctly connected and the jump starter is ready, start your car engine.
- Step 4: Remove Clamps. After the engine starts, immediately remove the black clamp from the car battery, then the red clamp. Disconnect the smart cables from the jump starter.

Image 6.1: Visual instructions for jump starting a car: 1. Plug cables into jump starter. 2. Connect clamps to battery. 3. Start engine. 4. Remove clamps.
6.2 Using as a Portable Power Bank
The jump starter can charge various electronic devices:
- Connect your device's USB charging cable to one of the USB output ports (5V/2A or 9V/2A QC3.0) on the jump starter.
- The jump starter will automatically begin charging your device.

Image 6.2: The CARHEV Jump Starter functioning as a portable power bank, charging a smartphone and a tablet.
6.3 Using the LED Emergency Light
The integrated LED light has three modes:
- Flashlight: Press and hold the power button for 3 seconds to turn on the flashlight.
- Strobe: Press the power button again to switch to strobe mode.
- SOS: Press the power button a third time to activate SOS signal mode.
- Press the power button again to turn off the light.

Image 6.3: The CARHEV Jump Starter's LED light illuminated, demonstrating its flashlight, SOS, and strobe capabilities.
7. Maintenance
To ensure the longevity and optimal performance of your CARHEV Jump Starter, follow these maintenance guidelines:
- Storage: Store the device in a cool, dry place away from direct sunlight and moisture. Use the provided storage bag for protection.
- Charging: Recharge the jump starter every 3-6 months, even if not in use, to maintain battery health.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Battery Care: Avoid fully discharging the battery frequently. Recharge promptly after use.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vehicle does not start | Low jump starter battery; Incorrect clamp connection; Vehicle battery completely dead; Other vehicle issues. | Recharge jump starter; Check clamp polarity and connection; Wait 30-60 seconds between attempts; Consult a mechanic if issues persist. |
| Jump starter not charging | Faulty charging cable; Faulty power adapter; Damaged charging port. | Try a different USB cable and power adapter; Contact customer support if the issue persists. |
| LED light not working | Low jump starter battery; Device malfunction. | Recharge jump starter; Contact customer support. |
9. Specifications
| Model Number | JS-07 |
| Peak Current | 7000 A |
| Battery Capacity | 26800 mAh |
| Battery Type | Lithium-ion |
| Voltage | 12 Volts |
| USB-C Input | 9V/2A |
| USB Output 1 | 5V/2A |
| USB Output 2 | 9V/2A QC3.0 |
| Engine Compatibility | Up to 10.0L Gasoline / 10.0L Diesel |
| Vehicle Service Type | ATV, Van, Motorcycle, Watercraft, Snowmobile, Lawn Mower, Car |
| Dimensions | 21 x 10 x 10 cm |
| Weight | 840 grams |
10. Warranty and Support
The CARHEV Jump Starter comes with 2 years of technical support. If you encounter any issues or have questions regarding the product, please contact our customer service. Our team is committed to responding within 24 hours to assist you.