Artisan Power NiMH Replacement Battery for B. Braun Syringe Pump Perfusor FM

1. Introduction

This manual provides essential instructions for the safe and effective use, installation, and maintenance of your Artisan Power NiMH Replacement Battery, Model MB-34506357-N. This battery is designed as a high-quality replacement for B. Braun Syringe Pump Perfusor FM and Pousse Seringue FM Se devices, specifically replacing OEM part numbers 34506357 and EE120311. Please read this manual thoroughly before using the product.

Figure 1: Artisan Power NiMH Replacement Battery for B. Braun Syringe Pump. This image shows the compact design and connector of the replacement battery.

2. Safety Information

General Precautions:

• Do not disassemble, crush, puncture, or short-circuit the battery.
• Do not expose the battery to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight.
• Keep the battery away from water, fire, and corrosive substances.
• Use only chargers specified for NiMH batteries.
• If the battery shows signs of damage, swelling, or leakage, discontinue use immediately and dispose of it properly.
• Keep out of reach of children.

Disposal:

Dispose of the battery according to local regulations. Do not dispose of with household waste. Consult your local waste management authority for recycling options.

3. Product Overview

The Artisan Power MB-34506357-N is a high-capacity NiMH rechargeable battery pack designed to provide reliable power for B. Braun Syringe Pump Perfusor FM and Pousse Seringue FM Se medical devices. It offers a 7.2 Volt output with a 3500 mAh capacity rating, which is an increase in capacity compared to original NiCd cells, leading to longer operating times and more charge cycles.

Key Features:

• Battery Type: NiMH (Nickel-Metal Hydride)
• Voltage: 7.2 Volts
• Capacity: 3500 mAh
• Compatibility: B. Braun Syringe Pump Perfusor FM, Pousse Seringue FM Se
• Replaces OEM Part Numbers: 34506357, EE120311
• Certification: ISO13485 Certified for Medical Devices

Figure 2: Artisan Power battery highlighting superior life and ISO 13485 certification. This image shows a hand holding a battery pack, emphasizing its quality for medical devices.

The battery casing may incorporate IonPure Antimicrobial Technology, providing resistance to dust, water ingress, and cleaning agents commonly found in healthcare environments, contributing to device longevity and hygiene.

Figure 3: Artisan Power battery label emphasizing IonPure Protection. This image details the antimicrobial technology integrated into the battery's construction.

4. Installation (Setup)

Important: Battery replacement in medical devices should only be performed by qualified service personnel following the device manufacturer's instructions and safety protocols. Improper installation can lead to device malfunction or injury.

General Steps (Consult your device's service manual for specific instructions):

1. Ensure the B. Braun Syringe Pump is powered off and disconnected from all external power sources.
2. Locate the battery compartment on the device. This may require opening a service panel.
3. Carefully disconnect the old battery from its connector and remove it. Note the orientation for correct installation of the new battery.
4. Insert the new Artisan Power replacement battery into the compartment, ensuring it fits securely.
5. Connect the battery to the device's battery connector, ensuring a firm and correct connection.
6. Close the battery compartment or service panel.
7. Power on the device and verify that the battery is recognized and charging.

5. Operating Instructions

Initial Charge:

Upon first installation or after prolonged storage, fully charge the battery for at least 12-16 hours using the B. Braun Syringe Pump's standard charging system. This initial charge helps to condition the NiMH cells for optimal performance.

Normal Use:

• Allow the battery to discharge significantly before recharging, but avoid complete deep discharge if possible, as this can reduce overall battery life.
• The device's battery indicator will show the remaining charge. Follow the device manufacturer's guidelines for when to recharge.
• Regularly cycle the battery (full discharge and recharge) to maintain its capacity and performance.

6. Maintenance

Cleaning:

• Keep battery contacts clean and free from dirt or corrosion. Use a dry, lint-free cloth to wipe contacts if necessary.
• Do not use harsh chemicals or abrasive cleaners on the battery.

Storage:

• If storing the battery for an extended period, charge it to approximately 50-70% capacity.
• Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
• Recharge the battery every 3-6 months during storage to prevent deep discharge and maintain cell health.

Battery Life Optimization:

• Avoid frequent partial discharges and recharges.
• Operate the device within its recommended temperature range.

7. Troubleshooting

If you encounter issues with your Artisan Power replacement battery, consider the following:

• Battery Not Charging: Ensure the battery is correctly installed and the device is properly connected to its charger. Check the charger and device for any error indicators.
• Short Operating Time: The battery may not be fully charged, or it might be nearing the end of its service life. Perform a full charge cycle. If the issue persists, consider replacing the battery.
• Device Not Powering On: Verify the battery is correctly installed and charged. If the device still does not power on, consult the B. Braun Syringe Pump's service manual or contact qualified service personnel.

For persistent issues, contact Artisan Power customer support or your device's service provider.

8. Specifications

Figure 4: A selection of Artisan Power replacement batteries. This image illustrates the range of compatible biomedical devices for Artisan Power batteries.

9. Warranty and Support

Warranty:

Artisan Power provides a 12-month warranty on this replacement battery from the date of purchase, covering defects in materials and workmanship under normal use. This warranty does not cover damage caused by misuse, unauthorized modification, or improper installation.

Customer Support:

For technical assistance, warranty claims, or product inquiries, please contact Artisan Power customer support. Refer to the product packaging or the Artisan Power website for current contact information.

No Relevant Videos Found:

No official product videos from the seller were available in the provided data for embedding in this manual.