1. Important Safety Instructions
Please read all instructions carefully before using the Morpilot Milk Frother HS010-S. Retain this manual for future reference.
- Do not immerse the base unit in water or other liquids.
- Ensure the power supply voltage matches the rating label on the frother.
- Do not operate the appliance with a damaged cord or plug.
- Keep out of reach of children.
- Use only the frother jug and whisk attachments provided with the unit.
- Avoid contact with moving parts.
- Do not fill above the maximum fill line indicated inside the jug.
- Always ensure the frother jug is properly seated on the base before operation.
2. Product Overview
The Morpilot Stainless Steel Milk Frother HS010-S is designed to create hot or cold milk foam for various beverages. It features a stainless steel jug and an induction heating base.
Figure 1: Morpilot Stainless Steel Milk Frother HS010-S. This image displays the complete milk frother unit, including the black base with control buttons, the stainless steel jug with a handle, two whisk attachments (one for frothing, one for heating), and a small cleaning brush. A cup of frothed coffee and coffee beans are also visible in the foreground.
Components:
- Induction Base: Contains the heating element and control panel.
- Stainless Steel Jug: Removable jug for milk, with a handle and pour spout.
- Frothing Whisk: Used for creating thick foam.
- Heating Whisk: Used for heating milk with minimal foam.
- Cleaning Brush: For maintaining the frother.
3. Setup
- Unpack: Carefully remove all components from the packaging.
- Clean: Before first use, wash the stainless steel jug and whisk attachments with warm soapy water. Rinse thoroughly and dry. Wipe the exterior of the induction base with a damp cloth. Do not immerse the base in water.
- Placement: Place the induction base on a stable, flat, heat-resistant surface.
- Power Connection: Plug the power cord into a grounded electrical outlet.
4. Operating Instructions
4.1 Choosing the Whisk
- For Frothing (Hot or Cold): Use the frothing whisk (with the spring coil).
- For Heating Milk (Minimal Foam): Use the heating whisk (flat whisk).
Insert the desired whisk onto the pin at the bottom of the jug before adding milk.
4.2 Adding Milk
- Pour fresh, cold milk into the jug.
- Observe the internal fill lines:
- MAX FROTH: Do not exceed this line when frothing milk (approx. 150ml).
- MAX HEAT: Do not exceed this line when only heating milk (approx. 300ml).
- MIN: Always fill at least to the minimum line (approx. 75ml).
Using whole milk (3.5% fat) typically yields the best frothing results.
4.3 Selecting a Program
Place the jug onto the induction base. The control panel on the base features several illuminated icons. Press the power button (⏻) to activate the frother, then select your desired function:
- Hot Dense Foam: Press the button with the cup with three wavy lines icon. Ideal for cappuccinos.
- Hot Airy Foam: Press the button with the cup with two wavy lines icon. Suitable for lattes.
- Hot Milk (No Foam): Press the button with the solid cup icon. Use the heating whisk for best results.
- Cold Foam: Press the button with the snowflake icon. The milk will be frothed without heating.
The selected program's indicator light will illuminate. The frother will automatically stop when the program is complete.
4.4 After Frothing
- Carefully remove the jug from the base.
- Pour the frothed milk into your beverage.
- Clean the jug and whisk immediately after use to prevent milk residue from drying.
5. Cleaning and Maintenance
Regular cleaning ensures optimal performance and extends the life of your frother.
- Unplug: Always unplug the frother from the power outlet before cleaning.
- Cool Down: Allow the frother to cool completely before cleaning.
- Jug and Whisk: Remove the whisk from the jug. Wash the stainless steel jug and whisk attachments with warm soapy water using a soft sponge or the provided cleaning brush. Rinse thoroughly and dry immediately. The jug and whisks are dishwasher safe (top rack only).
- Base Unit: Wipe the exterior of the induction base with a soft, damp cloth. Do not use abrasive cleaners or scourers. Never immerse the base unit in water or any other liquid.
- Storage: Store the frother in a clean, dry place when not in use.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Frother does not turn on. | Not plugged in; power outlet not working; frother not properly seated on base. | Check power connection; try a different outlet; ensure jug is correctly placed on the base. |
| Milk not frothing or heating properly. | Incorrect whisk used; milk level too high/low; milk type unsuitable; whisk not properly attached. | Ensure correct whisk is used for desired function; check milk fill lines; use fresh, cold whole milk; ensure whisk is securely attached to the pin. |
| Burning smell or milk sticking to bottom. | Milk residue from previous use; jug not clean. | Clean the jug thoroughly after each use. Do not exceed MAX fill lines. |
| Frother stops unexpectedly. | Overheating protection activated. | Unplug the unit and allow it to cool down for at least 10 minutes before reuse. |
7. Specifications
- Model: HS010-S
- Brand: Morpilot
- Material: Stainless Steel
- Dimensions: 20.5 x 14.5 x 14.5 cm (approximate package dimensions)
- Weight: 950 g (approximate item weight)
- UPC: 810206591185
- Max Frothing Capacity: 150ml
- Max Heating Capacity: 300ml
8. Warranty and Support
Morpilot provides a standard manufacturer's warranty for this product. For detailed warranty information, product support, or to report any issues, please contact Morpilot customer service through their official website or the retailer where the product was purchased.
Please have your model number (HS010-S) and proof of purchase ready when contacting support.
Website: www.morpilot.com
