HOMRELEXA BGY01-BLACK Big and Tall Office Chair Instruction Manual

1. Introduction

Thank you for choosing the HOMRELEXA BGY01-BLACK Big and Tall Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Designed for comfort and versatility, this chair features flip-up armrests, a retractable footrest, and a reclining backrest to support various sitting styles and activities.

2. Safety Information

• Ensure all components are present and undamaged before assembly.
• Follow assembly instructions carefully to prevent injury or damage.
• Do not stand on the chair.
• Do not use the chair if any parts are missing, damaged, or worn.
• Maximum weight capacity: 400 lbs. Do not exceed this limit.
• Keep children and pets away from the chair during assembly.

3. Package Contents

Please verify that all parts are included in your package:

• Chair Backrest
• Seat Cushion with Armrests
• Chair Base (5-star metal base)
• Gas Lift Cylinder
• Casters (5 pieces)
• Footrest Assembly
• Mounting Hardware (screws, washers, Allen wrench)
• Instruction Manual (this document)

4. Assembly Instructions

Assembly is designed to be straightforward and typically takes about 15 minutes. All necessary hardware and tools are included.

1. Attach Casters to Base: Insert the five casters into the holes at the end of each leg of the chair base. Push firmly until they click into place.
2. Install Gas Lift: Place the gas lift cylinder into the center hole of the chair base.
3. Assemble Seat and Backrest: Secure the backrest to the seat cushion using the provided screws and Allen wrench. Ensure all screws are tightened securely.
4. Attach Seat to Gas Lift: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring the center mechanism aligns with the top of the gas lift.
5. Install Footrest: Attach the footrest assembly to the underside of the seat cushion as per the diagrams in the included printed manual.

5. Operating Instructions

5.1. Flip-Up Armrests

The chair features 90°-180° adjustable flip-up armrests, allowing for versatile seating arrangements and increased space.

1. To Flip Up: Gently push the armrest inward towards the seat. Once released, the armrest can be rotated upwards to a vertical position.
2. To Flip Down: Rotate the armrest downwards until it locks into the desired horizontal position.

Image: Illustration of the armrest adjustment mechanism, showing how they can be rotated from 90 to 180 degrees.

Image: Demonstrates the versatility of the flip-up armrests, allowing for cross-legged sitting or providing space for pets.

5.2. Reclining Backrest and Retractable Footrest

The chair offers a reclining backrest and a retractable footrest for enhanced relaxation.

1. To Recline: Locate the recline lever (typically on the right side, under the seat). Pull the lever outwards to unlock the backrest, then lean back to your desired angle. Push the lever inwards to lock the backrest in place.
2. To Extend Footrest: Pull the footrest handle located beneath the front of the seat. The footrest will slide out. Adjust it to your preferred position.
3. To Retract Footrest: Push the footrest back under the seat until it is fully stored.

Image: A person comfortably reclined in the chair with the footrest extended, demonstrating a relaxed posture.

Video: Demonstrates the reclining function and the use of the retractable footrest for various activities like reading or relaxing.

5.3. Height Adjustment and Swivel

Adjust the chair height and utilize the 360° swivel for optimal positioning.

• Height Adjustment: Pull the height adjustment lever (typically on the left side, under the seat) upwards. To raise the chair, lift your weight off the seat. To lower the chair, remain seated while pulling the lever. Release the lever to lock the height.
• 360° Swivel: The chair is equipped with a smooth 360° swivel function, allowing for easy rotation without moving the base.

Image: Highlights the 360° swivel, adjustable height, silent casters, and SGS-certified gas lift for smooth operation.

6. Maintenance

Proper care will extend the life of your HOMRELEXA office chair.

• Cleaning Fabric: For the Gliter Fabric, gently spot clean with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners.
• Casters: Periodically check casters for hair or debris and clean as needed to ensure smooth rolling.
• Hardware: Regularly inspect all screws and bolts to ensure they are tight. Retighten if necessary.
• Gas Lift: The gas lift is maintenance-free. Do not attempt to disassemble it.

7. Troubleshooting

8. Specifications

• Brand: HOMRELEXA
• Model Name: Big and Tall Desk Chair-Plus (BGY01-BLACK)
• Color: Galaxy Black
• Product Dimensions: 26.8"D x 34"W x 48.3"H
• Maximum Weight Recommendation: 400 Pounds
• Material: Gliter Fabric (Foam Fill)
• Special Features: Adjustable Height, Ergonomic, Flippable Armrests, Foot Rest, Reclining, 360° Swivel
• Certifications: BIFMA-approved metal base, SGS-certified gas cylinder
• Item Weight: 44.1 pounds

Image: Detailed dimensions and weight capacity of the chair.

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact HOMRELEXA customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Contact: Please visit the HOMRELEXA Store on Amazon or refer to the contact information provided with your purchase.