GALAX PRO 710W Mini Circular Saw M1Y-TD-120 User Manual

1. Introduction

Thank you for choosing the GALAX PRO 710W Mini Circular Saw. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

The GALAX PRO Mini Circular Saw is a versatile and compact power tool designed for cutting various materials such as wood, plastic, and soft metals. Its powerful 710W motor and adjustable features make it suitable for a range of DIY projects and small-scale renovations.

2. General Safety Instructions

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using power tools.

2.1. Work Area Safety

• Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2.2. Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges, or moving parts.

2.3. Personal Safety

• Always wear appropriate personal protective equipment (PPE), including safety glasses, a dust mask, non-skid safety shoes, hard hat, or hearing protection.
• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source, picking up, or carrying the tool.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.

2.4. Circular Saw Specific Safety

• Kickback Prevention: Kickback is a sudden reaction to a pinched, bound, or misaligned saw blade, causing an uncontrolled saw to lift up and out of the workpiece toward the operator. Always maintain a firm grip with both hands on the saw and position your body to either side of the blade, but not in line with the blade.
• Never use damaged or incorrect blade washers or bolt. The blade washers and bolt were specifically designed for your saw, for optimum performance and safety of operation.
• Always ensure that the blades are in good condition, correctly mounted, and able to turn freely.
• Do not reach underneath the workpiece. The guard cannot protect you from the blade below the workpiece.
• Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the workpiece.

3. Components and Accessories

Your GALAX PRO Mini Circular Saw package includes the following items:

• 1 x GALAX PRO Mini Circular Saw (Model M1Y-TD-120)
• 1 x 115mm (4-1/2") 24T TCT Wood Saw Blade
• 1 x 115mm (4-1/2") 60T HSS Metal Saw Blade
• 1 x Hex Key
• 1 x Guide Rule (Parallel Guide)
• 1 x Dust Extraction Adapter
• 1 x User Manual

Figure 1: GALAX PRO Mini Circular Saw and included accessories.

Figure 2: Diagram illustrating the main components of the circular saw.

4. Setup

4.1. Blade Installation and Replacement

Always unplug the saw from the power source before installing or changing the blade.

1. Press and hold the spindle lock button.
2. Use the hex key to loosen the blade bolt by turning it counter-clockwise.
3. Remove the outer flange and the old blade.
4. Clean the inner and outer flanges.
5. Place the new blade onto the spindle, ensuring the teeth direction matches the arrow on the saw guard.
6. Reinstall the outer flange and blade bolt. Tighten the blade bolt clockwise with the hex key while holding the spindle lock button.

Figure 3: Visual guide for saw blade installation.

4.2. Attaching the Parallel Guide

The parallel guide helps achieve straight and accurate cuts. Slide the guide rule into the slot on the base plate and secure it with the locking knob. Adjust the distance between the blade and the guide to set your desired cutting width.

Figure 4: The parallel guide attached to the saw for straight cuts.

4.3. Connecting the Dust Extraction Adapter

Attach the dust extraction adapter to the saw's exhaust port. Connect a vacuum cleaner hose to the adapter to collect sawdust and maintain a cleaner work environment.

Figure 5: The dust extraction adapter connected to the saw's exhaust port.

5. Operation

5.1. Powering On/Off

To start the saw, press the safety lock switch and then squeeze the ON/OFF trigger switch. To stop the saw, release the trigger switch.

5.2. Adjusting Cutting Depth

The cutting depth can be adjusted to suit the thickness of your workpiece. Loosen the depth locking knob, move the base plate to the desired depth, and then tighten the knob securely. The maximum cutting depth is 1-2/3'' at 90° and 1'' at 45°.

Figure 6: Adjusting the cutting depth for various materials.

5.3. Adjusting Cutting Angle (Bevel Cuts)

For bevel cuts, the cutting angle can be adjusted from 0° to 45°. Loosen the angle locking knob, tilt the saw to the desired angle, and then tighten the knob. Ensure the angle is securely set before making a cut.

Figure 7: Adjusting the cutting angle for bevel cuts.

5.4. Cutting Techniques

Before starting any cut, ensure the workpiece is securely clamped. Allow the saw blade to reach full speed before engaging with the material. Apply steady, even pressure and guide the saw along the cutting line. Avoid forcing the saw, as this can lead to kickback or damage to the tool/material.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your circular saw.

• Cleaning: Always unplug the saw before cleaning. Use a soft, damp cloth to clean the housing. Do not use aggressive detergents or solvents. Keep ventilation slots clear of dust and debris.
• Blade Care: Regularly inspect saw blades for sharpness and damage. Replace dull or damaged blades immediately to prevent kickback and ensure clean cuts.
• Storage: Store the saw in a dry, secure location out of reach of children.

7. Troubleshooting

8. Technical Specifications

9. Warranty and Support

9.1. Warranty Information

Your GALAX PRO product includes the following warranty:

• 30 Days Money Back Guarantee: You may return your product for a full refund within 30 days of purchase.
• 3 Months to 24 Months: We will replace the defective unit due to manufacturer fault with a new one.
• 24 Months After-Sales Service: We provide timely and effective online after-sales service within 24 months of purchase.

Please note that accessories are not included in the warranty.

Figure 8: GALAX PRO Warranty Card outlining coverage and terms.

9.2. Customer Support

For questions about this or any other GALAX PRO product, please contact us via email:

E-mail: support@galaxia-tech.com