Polibi 3-in-1 U-Shaped Sleeper Sofa Instruction Manual

Introduction

Thank you for choosing the Polibi 3-in-1 U-Shaped Sleeper Sofa. This versatile furniture piece is designed to provide comfort and functionality, easily transforming from a spacious U-shaped sofa to a relaxing lounge or a convenient pull-out bed. It features integrated USB charging ports and removable armrests for enhanced adaptability. Please read this manual thoroughly before assembly and use to ensure proper setup and long-lasting enjoyment of your new sofa.

Safety Information

• Keep all assembly hardware out of reach of children.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as needed.
• Do not stand or jump on the sofa.
• Avoid placing hot items directly on the fabric.
• Do not exceed the maximum weight capacity of 1200 lbs (544 kg).
• Use caution when converting the sofa to a bed to avoid pinching fingers or clothing.
• Only use the provided USB ports for charging compatible electronic devices. Do not overload.

Package Contents

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Modular Sofa Sections (typically 3-5 sections for a U-shape)
• Removable Armrests (2 units)
• Back Cushions
• Seat Cushions (integrated into modular sections)
• Pillows (for lumbar support)
• Legs (typically plastic)
• Assembly Hardware (bolts, washers, Allen wrench)
• Instruction Manual

Assembly Instructions

Assembly typically requires two adults. Clear a spacious area for assembly. Do not fully tighten all bolts until all sections are aligned.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
2. Attach Legs: Locate the sofa legs and attach them to the bottom of each modular section. Ensure they are securely fastened.
3. Connect Modular Sections: Arrange the modular sections into the desired U-shape configuration. Use the provided connectors (usually metal brackets) to link the sections together. Ensure a snug fit.
4. Install Armrests: Slide the removable armrests onto the designated slots on the end sections of the sofa. Ensure they are firmly seated.
5. Place Cushions: Position the back cushions and any additional pillows onto the sofa.
6. Final Tightening: Once all sections are aligned and connected, fully tighten all bolts and screws.

Figure 1: Fully assembled Polibi U-Shaped Sleeper Sofa.

Figure 2: Detail showing the detachable armrest and deep seat cushion design.

Operating Instructions

Converting to a Sleeper Bed

The Polibi U-Shaped Sleeper Sofa can be easily converted into a comfortable bed. The central section of the sofa features a pull-out mechanism.

1. Clear the Area: Ensure there is enough space in front of the sofa for the pull-out section to extend fully.
2. Pull Out Bed: Grasp the handle or edge of the central seat cushion and gently pull it outwards. The hidden bed mechanism will slide out and lift into place, creating a flat sleeping surface.
3. Return to Sofa: To convert back to a sofa, push the extended section back into the sofa frame until it locks securely in place.

Figure 3: Top image shows the sofa configuration, bottom image shows the pull-out bed configuration with a USB port visible.

Figure 4: The sofa fully extended into a bed configuration.

Using the USB Charging Ports

The sofa includes built-in USB charging ports for your convenience.

• Locate the USB ports, typically on the side of the armrests or within a storage compartment.
• Connect your device's USB charging cable to the port.
• Ensure the sofa is connected to a power source if required (check power cord connection, if applicable).

Figure 5: Detail of the USB charging port located on the armrest.

Removing/Adjusting Armrests

The armrests are designed to be removable for increased flexibility or to create more space.

• To remove, gently lift the armrest straight up from its slot.
• To reattach, align the armrest with the slots and push down firmly until it is securely seated.

Maintenance and Care

Chenille Fabric Care

• Regular Cleaning: Vacuum the sofa regularly using an upholstery attachment to remove dust and loose debris.
• Spot Cleaning: For spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain. For stubborn stains, use a mild fabric cleaner specifically designed for chenille, testing on an inconspicuous area first.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading. Position your sofa away from direct sun or use curtains/blinds.
• Professional Cleaning: For deep cleaning, consider professional upholstery cleaning services.

General Care

• Frame and Legs: Wipe the frame and legs with a soft, damp cloth. Avoid harsh chemicals.
• Cushion Care: Rotate and fluff cushions periodically to maintain their shape and extend their lifespan.
• Hardware Check: Periodically check all assembly hardware and re-tighten if necessary to ensure stability.

Figure 6: Illustration of the sofa's construction materials, including high-quality Chenille fabric and high resilience foam.

Troubleshooting

Specifications

Warranty Information

Polibi products are manufactured to high-quality standards and are backed by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact Polibi customer support. Keep your proof of purchase for warranty claims.

Customer Support

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Polibi customer support:

• Website: Visit the Polibi Store on Amazon
• Email: Refer to your product packaging or warranty card for direct contact information.