Berrcom Digital Thermometer Bundle User Manual

Berrcom AET-F372 Rechargeable Digital Thermometer

The AET-F372 is a waterproof, rechargeable digital thermometer designed for comfortable and accurate temperature measurement. It features a clear LED display, beep alarm, last memory display, and automatic shutdown function.

Image: The Berrcom AET-F372 thermometer shown in its sleek, white charging case, displaying a temperature reading.

Berrcom ET003 Forehead and Ear Thermometer

The ET003 is a versatile thermometer capable of measuring temperature from the forehead and ear, suitable for all ages. It offers switchable Celsius/Fahrenheit units, an automatic shut-off function, and a fever alarm with backlight indicators.

Image: The Berrcom ET003 thermometer, white with blue buttons, displaying a temperature reading on its green backlit screen.

Berrcom AET-F372

1. Charging: Place the thermometer in its charging case with the charging terminals facing down. Ensure it is fully charged before first use. A full charge ensures optimal performance.
2. Power On/Off: The device typically powers on automatically when removed from the case. It features an automatic shutdown function to conserve battery.
3. Unit Selection: The default unit is usually Fahrenheit. Refer to the device's specific instructions for changing between Celsius and Fahrenheit, if applicable.

Image: A diagram illustrating how to correctly insert the AET-F372 thermometer into its charging case and how to gently press to remove it.

Berrcom ET003

1. Battery Installation: Open the battery compartment (usually located at the bottom or back) and insert two AAA batteries, ensuring correct polarity. Close the compartment securely.
2. Power On: Press the "START" button to turn on the thermometer. The display will show a brief self-test.
3. Unit Selection (℃/℉): With the device on, press and hold the "MOD" button for a few seconds to switch between Celsius (℃) and Fahrenheit (℉). The selected unit will be displayed.
4. Silent Mode: Long press the "MOD" button for approximately 6 seconds to enter or exit silent mode. This is useful for taking measurements without disturbing a sleeping child.

Image: The Berrcom ET003 thermometer with its blue protective cap being removed, indicating readiness for use for ear measurements.

Berrcom AET-F372

1. Measurement: Remove the thermometer from its charging case. Place the thermometer in the desired measurement location (e.g., orally under the tongue, axillary under the armpit).
2. Reading: Wait for the beep alarm, indicating the measurement is complete. The temperature will be clearly displayed on the LED screen.
3. Memory: The device automatically stores the last measurement for easy recall.

Image: A close-up of the Berrcom AET-F372 thermometer displaying a temperature of 98.24°F on its digital screen.

Berrcom ET003

The ET003 offers multiple measurement modes for various applications:

Image: A visual guide demonstrating the four measurement modes of the Berrcom ET003: Room Temperature, Object Temperature, Forehead Body Temperature, and Ear Body Temperature.

1. Forehead Measurement: Ensure the protective cap is on. Press the "START" button and gently scan the thermometer across the forehead, maintaining close contact with the skin.
2. Ear Measurement: Remove the protective cap. Gently insert the probe into the ear canal. Press the "START" button.
3. Object/Room Measurement: Select the appropriate mode using the "MOD" button. Point the thermometer at the object or towards the room for non-contact temperature measurement.
4. Fever Alarm: The screen backlight will turn red and a short beep will sound if the measured temperature exceeds the normal range (e.g., 100.4°F / 38°C). A green backlight indicates a normal temperature.

Image: The Berrcom ET003 thermometer showing its intelligent fever alarm system with green backlight for normal temperatures (e.g., 96.8°F) and red backlight for elevated temperatures (e.g., 100.4°F).

Berrcom AET-F372

The AET-F372 is IPX65 waterproof, allowing for easy cleaning. It can be wiped with water and cleaned with medical alcohol after or before each use to ensure hygiene and accuracy.

Store the thermometer in its charging case when not in use. This protects the device from damage and keeps it charged and ready for the next use.

Berrcom ET003

Clean the probe tip with a cotton swab or soft cloth lightly moistened with medical alcohol. Gently wipe the surface of the device with a soft, dry cloth. Do not immerse the device in water or use abrasive cleaners.

Store the thermometer in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity. Ensure the protective cap is on when storing to protect the probe.

Berrcom AET-F372

• Model: AET-F372
• Type: Rechargeable Digital Thermometer
• Waterproof Rating: IPX65
• Display: Clear Large LED
• Features: Beep alarm, Last memory display, Automatic shutdown function.
• Power Source: Rechargeable battery (integrated).

Berrcom ET003

• Model: ET003
• Type: Forehead and Ear Thermometer
• Measurement Modes: Forehead, Ear, Object, Room temperature.
• Unit: Celsius (℃) / Fahrenheit (℉) switchable.
• Automatic Shut-off: Approximately 30 seconds.
• Fever Alarm: Yes, with red backlight indicator.
• Silent Mode: Yes.
• Power Source: 2 x AAA batteries (not included or pre-installed, depending on packaging).