BBRKIN RF1380

BBRKIN Biometric 3-4 Rifle Gun Safe Instruction Manual

Model: RF1380

1. Introduction

The BBRKIN Biometric 3-4 Rifle Gun Safe (Model RF1380) provides secure storage for firearms and valuables. Constructed from heavy-duty, reinforced carbon steel, this safe offers robust protection against unauthorized access. It features multiple unlocking methods including biometric fingerprint, programmable passcode, and traditional key access, ensuring quick and reliable entry. The safe is designed to accommodate 3-4 rifles or shotguns up to 50 inches in length, with or without scopes, and includes an internal lock box for smaller items. Its slim design allows for placement in various home or office environments.

BBRKIN Biometric 3-4 Rifle Gun Safe, closed view

Image: The BBRKIN Biometric 3-4 Rifle Gun Safe in its closed position, showcasing its sleek black finish and biometric keypad.

2. Important Safety Information

  • Firearm Safety: Always store firearms unloaded and out of reach of children. Ensure all firearms are secured properly within the safe.
  • Mounting: For maximum security, it is highly recommended to secure the safe to a wall or floor using the provided hardware. This prevents unauthorized removal of the safe.
  • Keys: Keep backup keys in a secure location away from the safe and out of reach of children. Do not store backup keys inside the safe.
  • Alarm System: Be aware of the wrong access alarm feature. The safe will beep and lock access for a period if an incorrect code is entered three times consecutively. Utilize silent mode if discreet access is required.
  • Battery: Ensure batteries are installed correctly and replaced when the low battery indicator appears to maintain proper functionality.

3. Package Contents

Verify that all components are present before proceeding with setup:

  • BBRKIN Biometric 3-4 Rifle Gun Safe (Model RF1380)
  • Instruction Manual
  • Backup Keys (multiple sets for main safe and internal lock box)
  • Emergency Battery Holder
  • Mounting Hardware (for wall or floor installation)
  • Removable Shelf
  • Movable Long Gun Racks (foam holders)
  • Pistol Pockets (for door storage)
Interior view of BBRKIN gun safe showing removable shelf, gun racks, pistol pockets, LED light, and external battery pack

Image: An open view of the safe's interior, highlighting the removable shelf, foam gun racks, pistol pockets on the door, an LED light, and the external battery pack.

4. Setup

4.1 Unpacking and Placement

The BBRKIN Biometric 3-4 Rifle Gun Safe arrives fully assembled and ready for immediate use. Carefully remove all packaging materials. Choose a discreet and secure location for the safe, ensuring it is placed on a level surface.

4.2 Battery Installation

Locate the battery compartment, typically on the inside of the door or near the keypad. Insert the required batteries (usually AA or AAA, refer to the battery holder for specifics) ensuring correct polarity. The safe will typically emit a beep or light up to indicate successful battery installation.

4.3 Securing the Safe (Recommended)

To prevent unauthorized removal, it is strongly recommended to secure the safe to a wall or floor. The safe includes pre-drilled mounting holes and hardware for this purpose.

  1. Position the safe in its desired location.
  2. Mark the drilling points through the pre-drilled holes on the back or bottom of the safe onto the wall or floor.
  3. Move the safe and drill pilot holes at the marked locations.
  4. Reposition the safe and align the holes.
  5. Secure the safe using the provided mounting bolts and anchors. Ensure all bolts are tightened securely.
BBRKIN gun safe with dimensions and 180-degree door opening

Image: The gun safe with its door open 180 degrees, illustrating its dimensions and the wide access it provides. This image also shows the interior layout for securing firearms.

5. Operating Instructions

5.1 Unlocking Methods

The BBRKIN safe offers three primary methods for unlocking:

  • Biometric Fingerprint: For quick access, register your fingerprints (up to 100 unique fingerprints can be stored). Place a registered finger firmly on the scanner until the indicator light confirms access.
  • Programmable Passcode: Enter your personal PIN code (typically 4-8 digits) on the keypad, followed by the '#' or 'OK' button.
  • Backup Key: In case of battery failure or forgotten codes, use the provided backup key to manually open the safe. Insert the key into the emergency keyhole, turn, and then turn the handle.
Diagram showing four ways to quickly unlock the BBRKIN gun safe: fingerprint, passcode, key, and external battery with code/fingerprint

Image: A visual guide demonstrating the four quick unlocking methods: fingerprint scan, numeric passcode entry, physical key, and using the external battery compartment for emergency access with a code or fingerprint.

5.2 Programming Fingerprints and Passcodes

Refer to the detailed instructions in the included quick start guide for specific steps on how to register new fingerprints and set or change your personal passcode. It is crucial to test new entries immediately after programming.

Close-up of the BBRKIN gun safe's digital keypad with features listed: Large PIN Code, Emergency Key, Quick Access, Wrong access alarm, Silent mode, Backup Keys

Image: A detailed view of the digital keypad, highlighting its features such as large PIN code entry, emergency key access, quick access, wrong access alarm, silent mode, and backup keys.

5.3 Silent Mode

To operate the safe without audible feedback, activate silent mode. This feature is useful for discreet access, especially during nighttime or when others are present. Consult the quick start guide for instructions on enabling/disabling silent mode.

5.4 Wrong Access Alarm

The safe is equipped with a smart alarm system. If an incorrect passcode or fingerprint is attempted three times consecutively, the safe will emit an alarm and temporarily lock access via the keypad. This security feature deters unauthorized attempts.

Diagram of BBRKIN gun safe's smart alarm system, showing an alarm icon, a safe, sound waves, and a burglar, with a mute icon

Image: A graphic illustrating the smart alarm system, depicting an alarm siren, the safe, sound waves indicating an alert, and a masked figure representing a potential intruder. A mute icon is also shown, indicating the silent mode feature.

5.5 Internal Lock Box

The safe includes a separate internal lock box for storing smaller firearms or other valuables. This compartment is secured with its own key, providing an additional layer of security.

6. Maintenance

  • Battery Replacement: Replace batteries promptly when the low battery indicator illuminates. Use high-quality alkaline batteries for optimal performance.
  • Cleaning: Clean the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish. For the fingerprint scanner, use a clean, lint-free cloth.
  • Interior Care: The interior features soft padding and foam gun racks. Periodically check these for wear and tear. The gun racks are movable and can be adjusted or removed as needed.
  • Lock Mechanism: Do not lubricate the lock mechanism. If the lock feels stiff, contact customer support.

7. Troubleshooting

Problem Possible Cause Solution
Safe does not open with fingerprint. Fingerprint not registered, finger not placed correctly, low battery. Ensure finger is clean and dry. Re-register fingerprint. Replace batteries. Use passcode or backup key.
Safe does not open with passcode. Incorrect code entered, low battery, keypad malfunction. Verify correct passcode. Replace batteries. Use backup key.
Keypad is unresponsive. Dead batteries. Use the emergency battery holder to power the keypad, or use the backup key. Replace internal batteries immediately.
Alarm sounds frequently. Multiple incorrect access attempts. Ensure only authorized users attempt access. Review passcode and fingerprint registration.

8. Specifications

Feature Detail
Brand BBRKIN
Model Number RF1380
Style Name Biometric 3-4 Rifles
Exterior Dimensions (W x D x H) 11.8" x 11" x 54.3" (approx. 12"W x 11"D x 55"H)
Item Weight 80 Pounds
Material Carbon Steel, Alloy Steel
Color Black
Lock Type Biometric, Electronic Combination Lock, Key
Fingerprint Capacity Up to 100 fingerprints
Number of Shelves 1 (removable)
Mounting Type Floor Mount, Wall Mount
Assembly Required No

9. Warranty & Support

BBRKIN is committed to customer satisfaction. If you encounter any issues with your product upon receipt, such as scratches, damage, or malfunction, please contact our customer service team. We aim to provide a replacement or solution within 24 hours.

For further assistance, please refer to the contact information provided in your purchase documentation or visit the official BBRKIN website.

Contact Information:

© 2025 BBRKIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.