Vente-unique SARONE 60 cm Wall-Mounted Grooved Bathroom Vanity Unit Instruction Manual

Introduction

Thank you for choosing the Vente-unique SARONE 60 cm Wall-Mounted Grooved Bathroom Vanity Unit. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image: The SARONE 60 cm vanity unit installed in a contemporary bathroom, featuring its natural light wood finish and grooved front.

Safety Information

Please observe the following safety guidelines during assembly and use:

• Always follow the assembly instructions precisely. Incorrect assembly can lead to instability and potential injury.
• Ensure all fittings and fasteners are securely tightened. Periodically check and re-tighten as necessary.
• This unit is designed for wall mounting. Use appropriate wall fixings for your wall type (not included) to ensure secure installation. Consult a professional if unsure.
• Do not overload the drawers or the unit. Refer to the specifications for weight limits.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Avoid placing hot items directly on the surface. Use protective mats if necessary.

Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Vanity Unit Frame (MDF, natural light wood finish)
• 2 Drawers with grooved fronts
• 2 Black Handles/Knobs
• Soft-close drawer slides (pre-installed or separate)
• Assembly Hardware (screws, dowels, cam locks, etc.)
• Instruction Manual

Note: Sink, faucet, and wall mounting hardware are not included.

Setup and Assembly

Assembly requires basic tools such as a screwdriver (Phillips head), hammer, and possibly a drill for wall mounting. It is recommended that two people assemble this unit.

Step-by-Step Assembly:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches. Refer to the parts list to ensure all items are present.
2. Assemble the Main Frame: Follow the diagrams provided in the separate assembly guide (if applicable) to connect the side panels, bottom panel, and back panel using the provided hardware. Ensure all connections are secure.
3. Install Drawer Slides: Attach the drawer slides to the inside of the vanity frame according to the instructions. Ensure they are level and correctly oriented for the soft-close mechanism.
4. Assemble Drawers: Construct the two drawers, attaching the grooved front panels and handles. Install the corresponding drawer slide components onto the drawers.
5. Insert Drawers: Carefully slide the assembled drawers into the vanity frame, ensuring the soft-close mechanism engages correctly.
6. Prepare for Wall Mounting: Identify the desired location on the wall. Mark the drilling points for the wall mounting brackets, ensuring the unit will be level and at the correct height for your sink.
7. Secure to Wall: Drill pilot holes and install appropriate wall anchors and screws (not supplied) suitable for your wall type. Lift the vanity unit and securely attach it to the wall brackets. Verify stability before use.

Image: Technical diagram illustrating the dimensions (60 cm width, 55 cm height, 46 cm depth) and internal layout, including drawer mechanisms, for assembly reference.

Operating Your Vanity Unit

The SARONE vanity unit is designed for practical storage in your bathroom.

Drawer Operation:

• Opening: Gently pull the black handles to open the drawers.
• Closing: Push the drawers inward. The integrated soft-close mechanism will engage, allowing the drawers to close smoothly and silently without slamming.
• Storage: Utilize the two spacious drawers for organizing bathroom essentials. Avoid placing excessively heavy items in the drawers to maintain the integrity of the slides and unit.

Image: The SARONE vanity unit with its two drawers extended, demonstrating the accessible storage and the smooth operation of the soft-close slides.

Care and Maintenance

Proper care will extend the life and appearance of your vanity unit.

• Cleaning: Wipe surfaces with a soft, damp cloth. For stubborn marks, use a mild, non-abrasive cleaner specifically designed for wood or MDF. Dry immediately with a clean cloth.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or ammonia-based products, as these can damage the finish.
• Spills: Immediately wipe up any water spills or moisture to prevent swelling or damage to the MDF.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
• Hardware: Periodically check and tighten all screws and fittings to ensure the unit remains stable.

Troubleshooting

If you encounter any issues with your vanity unit, refer to the table below for common problems and solutions.

Product Specifications

Warranty Information

Vente-unique products are manufactured to high-quality standards. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region and purchase date. Please retain your proof of purchase for any warranty claims.

For detailed warranty information, please refer to the documentation provided at the time of purchase or visit the official Vente-unique website.

Customer Support

If you have any questions regarding the assembly, operation, or maintenance of your Vente-unique SARONE vanity unit, or if you require assistance with missing or damaged parts, please contact Vente-unique customer service.

Please have your product model name (SARONE 60 cm) and proof of purchase ready when contacting support to facilitate a quicker resolution.

You can typically find contact information on the Vente-unique website or on your purchase invoice.