GarveeTech 24000 BTU Mini Split Air Conditioner User Manual

1. Product Overview

The GarveeTech 24000 BTU Mini Split Air Conditioner with Heat Pump System (Model A029B) provides year-round comfort with its 4-in-1 functionality: Cooling, Heating, Dry, and Fan-Only modes. Designed for spaces up to 1500 sq ft, this 19 SEER2 unit offers rapid temperature control and energy efficiency. It features smart connectivity with built-in Wi-Fi 2.0, allowing control via a mobile app and voice commands through Alexa and Google Assistant. Its advanced design ensures whisper-quiet operation, making it ideal for various living spaces.

2. Important Safety Information

Read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage, personal injury, or death.

• Professional Installation Required: The air conditioner must be installed by qualified and professional personnel to ensure proper function and safety.
• Electrical Safety: Ensure that the indoor and outdoor connection wires and power supply are connected correctly and reliably. All electrical work must comply with local and national electrical codes.
• Refrigerant Handling: For units using refrigerants like R32, ensure proper ventilation during installation and strictly prohibit open flames in the installation area. Gas leakage detection must be performed after pipe connections.
• Stable Mounting: The indoor and outdoor units must be installed on stable, flat surfaces capable of supporting their weight to prevent vibration and noise.
• Vacuuming: For units with R410A, R32, or R454B refrigerants, the system must be vacuumed to remove all air before operation.

3. What's in the Box

Your GarveeTech Mini Split Air Conditioner package includes the following components:

• Indoor Unit
• Outdoor Unit
• Remote Control with Batteries
• Mounting Accessories (e.g., mounting plate, screws)
• Connection Pipes (refrigerant lines)
• Drainage Hose
• Electrical Connection Wires
• User Manual

Image: The complete GarveeTech Mini Split system, showing the indoor unit, outdoor unit, remote control, and various installation accessories.

4. Setup and Installation

Professional installation is required for this unit. The following steps provide a general overview of the installation process. Refer to the detailed installation videos and the included user manual for complete instructions.

4.1 Indoor Unit Installation

1. Check Components: Before installation, inspect all indoor and outdoor unit components for any damage. Ensure the cross-fan operates and the remote control functions correctly.
2. Mounting Plate: Securely install the wall mounting plate in the desired indoor location, ensuring it is level and can support the unit's weight.
3. Piping and Wiring: Determine the piping direction and cut the necessary openings. Connect the refrigerant pipes, drainage hose, and electrical wires to the indoor unit. Ensure all connections are secure and sealed.
4. Mount Indoor Unit: Pass the pipes and wires through the wall hole and securely fix the indoor unit onto the mounting plate.

4.2 Outdoor Unit Installation

1. Mounting: Fix the outdoor unit on a stable mounting bracket or concrete slab. Use rubber feet to decrease vibration and noise.
2. Refrigerant Pipes: Connect the refrigerant pipes to the outdoor unit's service valves. Tighten connections with appropriate torque to prevent gas leakage.
3. Electrical Connections: Open the electrical control box. Connect the indoor-outdoor connection wires and the main power supply cable to the electric terminal, following the wiring diagram. Ensure all connections are correct and reliable.

4.3 Vacuuming and Leakage Detection

1. Connect Vacuum Pump: Connect a vacuum pump and manifold gauge to the outdoor unit's service port.
2. Vacuum System: Switch on the vacuum pump and open the gauge's low-pressure valve. Vacuum the unit for at least 15-30 minutes (depending on pump capacity) until the vacuum gauge maintains -14.5 psi.
3. Leakage Test: Close the low-pressure valve and switch off the vacuum pump. Hold the pressure for 5 minutes. If the pointer rebounds more than 0.73 psi, check and repair any leakage points.
4. Refrigerant Release: Open the outdoor unit's low-pressure valve counter-clockwise for 1/4 turn to allow a small amount of refrigerant into the system. Close the valve after 5 seconds and check all pipe connectors for leaks using soapy water.
5. Final Steps: Once no leaks are found, clean the connectors, wrap the indoor connector pipes, and seal the wall hole with sealing cement. Fully open all liquid and gas valves.

5. Operating Instructions

Your GarveeTech Mini Split AC offers versatile operation for year-round comfort.

5.1 Modes of Operation

• Cooling Mode: Provides rapid cooling (23,000 BTU) in approximately 30 seconds.
• Heating Mode: Delivers turbo-heating (24,000 BTU) in about 60 seconds.
• Dry Mode: Dehumidifies the air.
• Fan-Only Mode: Circulates air without heating or cooling.
• Sleep Mode: Operates at a whisper-quiet 30 dB for undisturbed rest.
• Turbo Mode: Provides maximum cooling or heating power (up to 50 dB).

5.2 Smart Connectivity & Control

Control your unit conveniently through multiple methods:

• Mobile App (Wi-Fi 2.0): Power on/off, change modes, set temperatures, and program schedules from your smartphone.
• Voice Control: Compatible with Alexa and Google Assistant for hands-free operation.
• Remote Control: Full-function remote operates up to 26 ft away.

Image: Discover the convenience of advanced appliance control. The image shows a hand holding a remote control and a smartphone displaying the control app for the GarveeTech Mini Split AC.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your GarveeTech Mini Split AC.

• Filter Cleaning: The unit features an air purification filter and a filter light reminder. Clean filters regularly to maintain air quality and efficiency.
• Self-Cleaning Function: Utilize the 56°C high-temperature self-cleaning function for fresh and clean air.
• General Cleaning: Wipe down the indoor and outdoor units with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.

7. Troubleshooting

If you encounter issues with your GarveeTech Mini Split AC, refer to the following common problems and solutions. For complex issues, contact customer service.

8. Specifications

9. Warranty and Support

Your GarveeTech Mini Split Air Conditioner is backed by a 5-year manufacturer's warranty covering shipping damage, normal-use part failures, and any functional defects.

For installation guidance, troubleshooting assistance, or replacement parts, please contact our dedicated customer service team. We are committed to providing support and ensuring your satisfaction.