Introduction
This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your X-PRO 4000W 60V 27AH Electric Dirt Bike (Model DB-E02). Please read this manual thoroughly before initial use and retain it for future reference. This vehicle is designed for off-road use only.
Image: X-PRO E02 4000W Electric Dirt Bike being ridden on a dirt path.
Safety Information
Always prioritize safety when operating the electric dirt bike. Failure to follow safety guidelines can result in serious injury or damage to the vehicle.
- Wear appropriate safety gear, including a helmet, gloves, and protective clothing.
- Ensure all components are securely fastened before each ride.
- Do not operate the bike under the influence of alcohol or drugs.
- Familiarize yourself with local regulations regarding electric dirt bike use.
- This vehicle is intended for off-road use only and cannot be officially registered for any purpose.
Setup and Assembly
Your X-PRO Electric Dirt Bike requires some assembly. Follow these steps carefully. Refer to the assembly video for visual guidance.
Unboxing and Initial Inspection
- Carefully open the shipping carton.
- Remove the outer cardboard box and metal frame.
- Locate the accessory box containing tools and small parts.
- Remove all protective packaging and zip ties from the bike components.
Video: X-PRO 4000W Electric Dirt Bike Assembly Video. This video demonstrates the complete assembly process from unboxing to final checks.
Handlebar Installation
- Position the handlebars into the clamps on the fork.
- Ensure the display and control buttons are correctly oriented.
- Secure the handlebars using the provided bolts and Allen wrench. Tighten evenly.
Image: Close-up of the X-PRO Electric Dirt Bike handlebars with the display and controls mounted.
Front Wheel Installation
- Remove the protective spacer from the front brake caliper.
- Align the brake rotor with the brake caliper.
- Insert the front axle through the wheel hub and fork.
- Secure the axle with the washers and nuts, tightening them firmly with the provided wrenches.
Image: The front wheel of the X-PRO Electric Dirt Bike, highlighting the 19-inch tire and disc brake system.
Rear Fender Installation
- Attach the rear fender to the designated mounting points on the frame.
- Use the provided screws and Allen wrench to secure it.
Headlight Cover Installation
- Position the headlight cover over the front LED light assembly.
- Align the mounting holes and secure with the provided screws.
Image: Front view of the X-PRO Electric Dirt Bike, showcasing the dual LED headlight.
Operating Instructions
Familiarize yourself with the controls and features before riding.
Power On/Off
- To power on the bike, press and hold the power button on the handlebar control panel. The display will illuminate.
- To power off, press and hold the power button again until the display turns off.
Speed Modes
The bike features 3 safe speed modes:
- 1st Gear: Approximately 15 mph (25 km/h) for a relaxed pace.
- 2nd Gear: Approximately 22 mph (35 km/h) for balanced performance.
- 3rd Gear: Approximately 34 mph (55 km/h) for higher speed.
Use the '+' and '-' buttons on the control panel to switch between speed modes.
Headlight and Taillight Operation
- Press the headlight button on the control panel to turn the front LED headlight on or off.
- The rear taillight operates in conjunction with the headlight.
Horn
Press the green horn button on the left handlebar to activate the horn.
Video: X-PRO E02 4000W Electric Dirt Bike in action, demonstrating various features including speed modes and lights.
Maintenance
Regular maintenance ensures the longevity and optimal performance of your electric dirt bike.
- Tire Pressure: Check tire pressure before each ride. Maintain recommended PSI for optimal performance and safety.
- Brakes: Regularly inspect brake pads and rotors for wear. Ensure brake levers operate smoothly and provide adequate stopping power.
- Chain: Keep the chain clean and lubricated to prevent rust and ensure smooth operation.
- Battery Care: Charge the 60V 27AH lithium battery fully after each use. Avoid completely draining the battery. Store the bike in a cool, dry place when not in use. Charging time is approximately 5 hours.
- General Cleaning: Clean the bike regularly with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
Troubleshooting
If you encounter issues with your X-PRO Electric Dirt Bike, refer to these common solutions. For persistent problems, contact customer support.
- Bike does not power on: Ensure the battery is fully charged and properly connected. Check all electrical connections.
- Motor not engaging: Verify the power is on and the correct speed mode is selected. Check for any error codes on the display.
- Brakes feel weak: Inspect brake pads for wear and ensure hydraulic fluid levels are adequate (if applicable). Adjust brake tension if necessary.
- Unusual noises: Stop riding immediately and inspect the bike for loose parts, chain issues, or foreign objects.
Specifications
| Feature | Specification |
|---|---|
| Bike Type | Dirt Bike |
| Age Range (Description) | Adult |
| Brand | X-PRO |
| Number of Speeds | 3 |
| Color | Black |
| Frame Material | Alloy Steel |
| Suspension Type | Dual |
| Special Feature | Dual Disc Brake |
| Included Components | Dirtbike |
| Size | Large |
| Brake Style | Disc |
| Style | Dirtbike |
| Model Name | DB-E02 |
| Assembly Required | Yes |
| Manufacturer | X-PRO |
| Warranty Description | 1 month |
| Material | Plastic |
| Number of Items | 1 |
| Part Number | DB-E02 |
Image: Diagram illustrating the dimensions and weight specifications of the X-PRO Electric Dirt Bike.
Warranty and Support
Your X-PRO Electric Dirt Bike comes with a 1-month warranty. For any questions, technical assistance, or parts inquiries, please visit the X-PRO Store or contact customer service.
