Introduction
The Ninja BlendBOSS Personal Blender is designed for efficient blending of ingredients, including ice, to create smoothies and frozen drinks. This manual provides essential information for the safe and effective operation, maintenance, and care of your blender.
Important Safety Information
READ ALL INSTRUCTIONS BEFORE USE.
- Always ensure the blender is unplugged before assembly, disassembly, or cleaning.
- Do not immerse the motor base in water or other liquids.
- Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender.
- Ensure the blade assembly is securely attached to the tumbler and the tumbler is properly seated on the motor base before operating.
- Do not overfill the tumbler.
- Avoid contact with moving parts.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
What's Included
Your Ninja BlendBOSS Personal Blender package includes the following components:
- 1200-Peak-Watt Motor Base
- One (1) 26-oz. BlendBOSS Travel Tumbler
- One (1) LeakProof Easy-Sip Chug & Straw Lid Assembly
- One (1) Ninja CrushBlade Assembly

Image: Overview of the Ninja BlendBOSS Personal Blender and its included components.
Setup
- Unpack Components: Carefully remove all parts from the packaging.
- Initial Cleaning: Wash the tumbler, lid, and blade assembly in warm, soapy water. Rinse thoroughly and air dry. The motor base can be wiped clean with a damp cloth.
- Positioning: Place the motor base on a clean, dry, and level surface. Ensure the power cord is accessible.

Image: The compact motor base of the Ninja BlendBOSS blender on a kitchen countertop, illustrating its space-saving design.
Operating Instructions
- Add Ingredients: Fill the 26-oz. travel tumbler with your desired ingredients. Do not exceed the MAX FILL line. For best results, add liquids first, then soft ingredients, followed by leafy greens, and finally ice or frozen ingredients.
- Attach Blade Assembly: Screw the Ninja CrushBlade Assembly onto the open end of the tumbler until it is securely tightened.
- Place on Motor Base: Invert the tumbler and place it onto the motor base. Twist clockwise until it clicks into place. The blender will not operate unless the tumbler is correctly locked.
- Select Program: Plug in the blender. Choose one of the three Auto-iQ programs (Smoothie, Ice Crush, Blend) or use the Pulse button. The Auto-iQ programs feature unique pulsing, blending, and pausing patterns for optimal results.
- Blending: Press the desired program button. The blender will run through its cycle and automatically stop when complete. For manual control, use the Pulse button.
- Remove Tumbler: Once blending is complete, twist the tumbler counter-clockwise to unlock it from the motor base.
- Enjoy Your Blend: Unscrew the blade assembly and replace it with the LeakProof Easy-Sip Chug & Straw Lid. The lid features an integrated chug spout and a detachable straw for convenient on-the-go consumption. Ensure the flip cap is locked to prevent leaks.

Image: A hand demonstrating the secure, leakproof flip cap design of the Ninja BlendBOSS tumbler, ideal for travel.

Image: Two individuals holding their Ninja BlendBOSS tumblers, showcasing the convenient straw lid option for drinking.
Maintenance and Cleaning
Proper cleaning and maintenance ensure the longevity and optimal performance of your Ninja BlendBOSS Personal Blender.
- Dishwasher Safe Parts: The 26-oz. travel tumbler, LeakProof Easy-Sip Chug & Straw Lid, and Ninja CrushBlade Assembly are all dishwasher safe (top rack recommended).
- Hand Washing: For hand washing, use warm, soapy water and a non-abrasive brush to clean the blade assembly. Exercise caution when handling the blades.
- Motor Base Cleaning: Wipe the motor base clean with a damp cloth. Do not immerse the motor base in water or any other liquid.
- Storage: Store the blender in a clean, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; Tumbler not properly seated; Overheating. | Ensure power cord is securely plugged in. Twist tumbler clockwise until it clicks into place. Unplug and allow motor to cool for 15 minutes if overheated. |
| Ingredients not blending smoothly. | Too little liquid; Overfilled; Ingredients too large. | Add more liquid. Reduce ingredient quantity. Cut large ingredients into smaller pieces. Use Pulse function for stubborn ingredients. |
| Leakage from tumbler. | Blade assembly not tightened; Tumbler overfilled; Lid not secured. | Ensure blade assembly is tightly screwed onto tumbler. Do not exceed MAX FILL line. Ensure LeakProof lid is properly attached and flip cap is locked. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Ninja |
| Model Number | DB351ST |
| Power | 1200-Peak-Watt Motor |
| Capacity | 26 fluid ounces |
| Dimensions (D x W x H) | 7.2"D x 6.69"W x 12.91"H |
| Weight | 5.6 pounds |
| Control Type | Push Button, Pre-set Programs (Auto-iQ) |
| Number of Speeds | 3 (Smoothie, Ice Crush, Blend) + Pulse |
| Blade Material | Stainless Steel |
| Container Material | Plastic (BPA Free) |
| Color | Stone Mint |
| UPC | 622356713160 |
Warranty and Support
The Ninja BlendBOSS Personal Blender comes with a 1 Year Limited Warranty. For detailed warranty information, product registration, or customer support, please visit the official Ninja website or contact their customer service department. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, please refer to the contact information provided on the official Ninja website: www.ninjakitchen.com