Important Safety Instructions
Please read all instructions carefully before using your Ninja BlendBOSS Personal Blender. Failure to follow these instructions may result in property damage or personal injury.
- Always ensure the blender is unplugged from the power outlet before assembly, disassembly, or cleaning.
- Do not immerse the motor base in water or other liquids. Clean with a damp cloth only.
- Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used only when the blender is not running.
- Blades are sharp. Handle the blade assembly with care to avoid injury.
- Do not blend hot liquids. This can cause pressure buildup and result in scalding or burns.
- Ensure the tumbler and blade assembly are securely locked onto the motor base before operating.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Product Components
The Ninja BlendBOSS Personal Blender includes the following components:
- 1200-Peak-Watt Motor Base
- 26oz BlendBOSS Travel Tumbler with Handle
- LeakProof Easy Sip Chug & Straw Lid Assembly
- Ninja CrushBlade Assembly
- Detachable Straw
Setup and Assembly
- Place the motor base on a clean, dry, and level surface. Ensure the power cord is unplugged.
- Add your desired ingredients into the 26oz BlendBOSS Travel Tumbler. Do not fill past the MAX FILL line.
- Screw the Ninja CrushBlade Assembly onto the open end of the tumbler until it is tightly sealed.
- Invert the tumbler and place it onto the motor base. Twist clockwise until it clicks securely into place. The blender will not operate unless the tumbler is correctly locked.
- Plug the power cord into a standard electrical outlet.
Operating Instructions
Filling the Tumbler
For optimal blending results, follow these guidelines:
- Always add liquids first, then soft ingredients, followed by hard ingredients (like frozen fruit or ice).
- Do not exceed the MAX FILL line indicated on the tumbler.
- Ensure the lid is securely attached before blending.
Using Auto-iQ Programs
The Ninja BlendBOSS features three intelligent Auto-iQ programs designed for specific blending tasks. These programs combine unique pulsing, blending, and pausing patterns to achieve optimal results automatically.
- Smoothie: Ideal for creating smooth, creamy beverages from fresh or frozen fruits and liquids.
- Ice Crush: Specifically designed to crush ice into snow for frozen drinks and cocktails.
- Blend: A versatile program for general blending tasks, including sauces, purees, and protein shakes.
To use an Auto-iQ program, simply press the corresponding button on the motor base. The program will run its cycle and stop automatically. You can press any button to stop the program at any time.
Manual Operation
For manual control, press and hold the 'Blend' button for continuous blending. Release the button to stop. The 'Pulse' button can be used for short bursts of power to chop ingredients or break down larger pieces.
Post-Blending
Once blending is complete, twist the tumbler counter-clockwise to unlock it from the motor base. Remove the blade assembly and replace it with the LeakProof Easy Sip Chug & Straw Lid for on-the-go convenience. The lid features an integrated chug spout and a detachable straw.
Demonstration Videos
Video 1: This video demonstrates the Ninja BlendBOSS Blender in action, preparing smoothies and other drinks. It showcases the blending process and the ease of use.
Video 2: This video illustrates how to use the BlendBOSS for making frozen coffee, highlighting its ice-crushing capabilities for thick, cold beverages.
Maintenance and Cleaning
Proper cleaning and maintenance ensure the longevity and performance of your blender.
- Dishwasher Safe Parts: The 26oz tumbler, lid, and blade assembly are dishwasher safe (top rack only).
- Hand Washing: For hand washing, use warm, soapy water and a non-abrasive brush to clean the tumbler, lid, and blade assembly. Exercise caution when handling the sharp blades. Rinse thoroughly.
- Motor Base: Wipe the motor base clean with a damp cloth. Do not immerse the motor base in water or spray it with water.
- Storage: Store the blender in a clean, dry place with the tumbler and blade assembly detached or loosely assembled to allow for air circulation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; Tumbler not securely locked; Overheating. | Ensure power cord is firmly plugged in. Twist tumbler clockwise until it clicks into place. If overheated, unplug and let cool for 15 minutes before restarting. |
| Ingredients are not blending smoothly. | Too many ingredients; Not enough liquid; Ingredients are too large. | Reduce ingredient quantity. Add more liquid. Cut large ingredients into smaller pieces. Use the Pulse function for stubborn ingredients. |
| Leakage from the tumbler. | Blade assembly not tightened; Tumbler overfilled; Lid not properly sealed. | Ensure blade assembly is tightly screwed onto the tumbler. Do not exceed the MAX FILL line. Confirm the lid is securely closed and locked. |
| Unpleasant odor during operation. | New motor smell; Overloading. | A new motor may emit a slight odor during initial uses; this is normal. If the odor is strong or persistent, reduce load and ensure proper ventilation. If it persists, contact customer support. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Ninja |
| Model Number | DB351PR |
| Power | 1200-Peak-Watt Motor |
| Capacity | 26 oz (690 ml) |
| Voltage | 120 volts |
| Wattage | 1100 watts |
| Number of Speeds | 3 (Auto-iQ Programs) |
| Controls Type | Push Button |
| Product Dimensions (D x W x H) | 7.2"D x 6.69"W x 12.91"H |
| Item Weight | 5.6 pounds |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Material Type Free | BPA Free |
| Blade Material | Stainless Steel |
| Special Features | Compact, Portable, Auto-iQ Technology, Leakproof Lid |
Warranty and Support
Warranty Information
This Ninja BlendBOSS Personal Blender comes with a 1 Year Limited Warranty. For detailed terms and conditions, please refer to the warranty card included with your product or visit the official Ninja website.
Customer Support
For any questions, assistance, or to register your product, please contact Ninja Customer Service. Contact information can typically be found on the product packaging or the official Ninja website. Please have your model number (DB351PR) and purchase date available when contacting support.