Keelian 78-inch Adjustable Height Console Table with Power Outlet

1. Introduction

Thank you for choosing the Keelian 78-inch Adjustable Height Console Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new console table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Important Safety Information

• Always assemble the table according to the provided instructions.
• For added stability, secure the table to the wall using the provided hardware.
• Be cautious of pinch points during assembly and use, especially when adjusting height.
• Do not place objects exceeding 22 pounds (10 kg) on the table to prevent tipping.
• Keep the table away from heat sources and direct flames.
• Do not use this product for any purpose other than its intended design as a console table.

2. Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Tabletop sections
• Metal frame components
• Power hub with AC outlets and USB ports
• Adjustable feet
• Assembly Tools (Allen Key, Screwdriver)
• Assembly Instructions
• Wall attachment hardware

3. Setup and Assembly Instructions

Assembly typically takes approximately 15 minutes. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Assemble Frame: Attach the metal frame components together using the provided screws and Allen key. Ensure all connections are secure.
3. Attach Tabletop: Secure the tabletop sections to the assembled metal frame. Ensure the power hub section is correctly oriented.
4. Install Adjustable Feet: Screw the adjustable feet into the bottom of the table legs. These can be adjusted later to level the table.
5. Connect Power Cord: Route the power cord from the built-in power hub to a suitable wall outlet.
6. Wall Attachment (Recommended): For enhanced stability, especially on uneven floors or if the table is not flush against a wall due to baseboards, use the provided wall attachment hardware to secure the table to the wall.

Figure 3.1: Product dimensions and height adjustment range.

Figure 3.2: Detailed view of height adjustment points.

4. Operating Instructions

Height Adjustment

The console table features an adjustable height mechanism, allowing you to set the tabletop between approximately 25.2 inches and 37.0 inches. To adjust the height:

1. Locate the adjustment pins on the table legs.
2. Carefully lift the tabletop slightly to relieve pressure on the pins.
3. Pull out the adjustment pins and slide the inner leg section up or down to the desired height.
4. Ensure the pins fully re-engage into the corresponding holes at the new height. Verify both sides are adjusted evenly and securely before placing items on the table.

Figure 4.1: Console table height adjustment in use.

Using the Built-in Power Hub

The console table includes a built-in power hub for convenient charging and power access.

• AC Outlets: Plug in devices requiring standard 120V/12A power.
• USB Ports: Use the 5V/2A USB ports to charge compatible electronic devices such as smartphones and tablets.

Ensure the table's power cord is securely plugged into a functional wall outlet before using the power hub.

Figure 4.2: Details of the integrated power hub.

Adjustable Feet

The table is equipped with adjustable foot pads to stabilize the unit on uneven floors and protect your flooring from scratches. Rotate the foot pads clockwise or counter-clockwise to raise or lower each corner until the table is level and stable.

Figure 4.3: Adjustable foot pads for stability.

5. Maintenance

• Cleaning: Wipe the table surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Inspections: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Power Hub Care: Keep the power outlets and USB ports free from dust and debris. Do not expose the power hub to liquids.
• Weight Limit: Adhere to the maximum weight recommendation of 22 pounds to prevent structural damage or tipping.

6. Troubleshooting

• Table is Wobbly:
  a. Ensure all assembly screws are tightened.
  b. Adjust the individual foot pads to level the table on uneven surfaces.
  c. Consider using the wall attachment hardware for increased stability.
• Power Outlets/USB Ports Not Working:
  a. Verify the table's main power cord is securely plugged into a functional wall outlet.
  b. Check if the wall outlet itself is working by plugging in another device.
  c. Ensure no circuit breaker has tripped.
• Difficulty Adjusting Height:
  a. Ensure the tabletop is slightly lifted to relieve pressure on the adjustment pins.
  b. Check for any obstructions in the leg channels.

7. Specifications

8. Warranty Information

Keelian products are designed for quality and durability. For specific warranty details, please refer to the warranty card included with your product or contact Keelian customer support. Keep your purchase receipt as proof of purchase for any warranty claims.

9. Customer Support

If you have any questions, require assistance with assembly, or encounter any issues with your Keelian console table, please do not hesitate to contact our customer service team. We are available 24/7 to provide support.

Please refer to your purchase documentation or the Keelian brand store on Amazon for contact information.