Alpine BRV-S80C 8-inch BassRev Component Speaker Set User Manual

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Alpine BRV-S80C 8-inch BassRev Component Speaker Set. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and safety. Keep this manual for future reference.

2. Safety Information

Always observe the following safety precautions:

• Disconnect the vehicle's negative battery terminal before starting any electrical work to prevent short circuits.
• Ensure all wiring is properly insulated to prevent damage to the vehicle's electrical system or the speakers.
• Avoid installing speakers in locations that obstruct vehicle operation or safety features.
• Consult a professional installer if you are unsure about any aspect of the installation process.
• Do not expose speakers to excessive moisture or extreme temperatures.

3. Package Contents

The Alpine BRV-S80C Component Speaker Set typically includes the following items:

• Two (2) 8-inch BassRev Woofers
• Two (2) Tweeters
• Two (2) External Crossovers
• Mounting Hardware
• Instruction Manual

4. Features

The Alpine BRV-S80C Component Speaker Set incorporates advanced design elements for enhanced audio performance:

• High Excursion Design Gathered Edge (H.E.D.G.E.) Rubber Surround: This design increases output and low frequency extension, allowing for deeper bass response.
• Unique Lapel Cone Shape: Engineered for high excursion, contributing to powerful and accurate sound reproduction.
• OPTIM Sync Technology: Features pre-EQ selection specific to each driver. This technology requires a 3.0 or newer update on compatible Alpine sound processors (e.g., PXE-C80-88) for full functionality.
• Polypropylene and Mica Cone Material: Provides increased rigidity for improved sound clarity and durability.
• Gun Metal Chemical Topcoat: Offers a premium aesthetic finish.

Image: Alpine OPTIM Sync Technology graphic, illustrating the integration capabilities with Alpine sound processors.

5. Setup and Installation

Proper installation is crucial for the performance and longevity of your speakers. It is highly recommended that installation be performed by a qualified professional.

5.1. Planning the Installation

Before beginning, determine the optimal mounting locations for the 8-inch woofers and tweeters in your vehicle. Consider factors such as sound staging, available space, and vehicle aesthetics. Ensure adequate clearance for the speaker depth and magnet structure.

Image: Front view of the Alpine BRV-S80C 8-inch woofer, showcasing the cone and H.E.D.G.E. surround.

Image: Rear view of the Alpine BRV-S80C 8-inch woofer, showing the magnet structure and speaker terminals.

Image: The tweeters included with the Alpine BRV-S80C component speaker set.

5.2. Mounting

Mount the woofers securely in the chosen locations using the provided hardware. Ensure a tight seal to prevent air leaks, which can negatively impact bass response. Mount the tweeters in a location that provides optimal sound dispersion, typically at ear level or slightly above.

5.3. Wiring

Connect the woofers and tweeters to their respective outputs on the external crossovers. Then, connect the crossover inputs to your amplifier's speaker outputs. Pay close attention to polarity (+/-) to ensure correct phase and optimal sound quality. Refer to your amplifier's manual for specific wiring diagrams.

6. Operating Instructions

Once installed, ensure all connections are secure. Power on your audio system and gradually increase the volume. Adjust your amplifier's gain settings and head unit's equalizer to achieve desired sound balance. Avoid operating the speakers at excessively high volumes for extended periods to prevent damage.

7. Maintenance

The Alpine BRV-S80C speakers require minimal maintenance:

• Periodically inspect speaker grilles and surrounds for any signs of damage or wear.
• Clean the speaker grilles with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
• Ensure no foreign objects are lodged in the speaker cone or surround.

8. Troubleshooting

If you encounter issues with your speakers, refer to the following common problems and solutions:

• No Sound: Check all wiring connections, including power to the amplifier, speaker wires, and crossover connections. Verify the audio source is functioning correctly.
• Distorted Sound: Reduce the volume. Check amplifier gain settings; they may be set too high. Ensure speaker wires are not shorting. Inspect speakers for physical damage.
• Weak Bass: Verify woofer polarity. Ensure woofers are securely mounted and sealed in their enclosures. Check amplifier settings for low-pass filters or bass boost.
• No Treble: Check tweeter wiring and crossover connections. Ensure tweeters are not damaged.

If problems persist, consult your authorized Alpine dealer or a professional car audio technician.

9. Specifications

10. Warranty Information

This Alpine BRV-S80C Component Speaker Set is covered by a 1-Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, abuse, accident, or unauthorized modifications.

11. Support

For technical assistance, troubleshooting beyond this manual, or warranty service, please contact your authorized Alpine dealer or visit the official Alpine website for customer support contact information.

Alpine Official Website: www.alpine-usa.com (Example link, actual link may vary)