1. Safety Information
WARNING: Please read and understand all instructions before assembling and using this bunk bed. Failure to follow these warnings could result in serious injury.
- Weight Limit: Each bunk supports up to 350 lbs. Do not exceed this weight limit.
- Mattress Thickness: For safety, the mattress thickness should be 4–6 inches. The upper bunk mattress must sit at least 5 inches below the top of the guardrail.
- Guardrails: The top bunk is equipped with a 13-inch high iron guardrail to prevent falls. Ensure all guardrails are securely fastened.
- Ladder Safety: The built-in ladder features optimized spacing for secure climbing. Ensure the ladder is properly attached before use.
- Anti-Tipping Kit: Utilize the provided anti-tipping kit to secure the bed frame to the wall, enhancing stability and preventing accidental tipping.
- No Jumping: Do not jump on the bed.
- ASTM F1427-21 Certified: This bunk bed meets rigorous U.S. safety standards for bunk beds.
Figure 1: Product certified to ASTM F1427-21 safety standards.
2. Product Overview
The JOYMOR Metal Full Over Full Bunk Bed is designed for comfort, durability, and smart space optimization. Featuring two full-size sleeping areas, it provides ample room for teens or adults. Its low-profile design and sturdy metal construction make it ideal for various room settings.
- Spacious Design: Two full-size bunks (78" x 61" each) offer generous sleeping space.
- Space-Saving: Vertical design maximizes room layout, saving over 50% floor area. Low-profile height (54") accommodates low ceilings.
- Heavy-Duty Construction: Reinforced steel frames with 20 solid slats and a central support bar ensure durability and stability.
- Versatile: Can be separated into two individual full-size beds for future needs.
Figure 2: Assembled JOYMOR Metal Full Over Full Bunk Bed.
3. Package Contents
Please verify all parts are present before beginning assembly. Refer to the included manual for a detailed parts list.
Figure 3: All components and hardware included in the package.
4. Assembly Instructions
Assembly typically requires two adults. Follow the steps carefully to ensure proper and safe construction.
Step 1: Assemble the Headboards and Footboards
Connect the vertical and horizontal frame pieces for both the headboards and footboards using the designated screws and tools. Ensure all connections are tight and secure.
Step 2: Attach Side Rails to Form Bed Frames
Attach the long side rails to the assembled headboards and footboards to create two separate bed frames. Use the appropriate hardware and tighten all bolts.
Step 3: Install Bed Slats
Place the bed slats onto the designated supports on both the upper and lower bed frames. Ensure each slat is securely in place. The plastic caps (M) are used to secure the slats.
Step 4: Stack the Bed Frames
Carefully lift the upper bed frame and place it onto the lower bed frame, aligning the connection points. Secure the frames together using the provided bolts and connectors.
Step 5: Attach the Ladder and Guardrails
Attach the ladder to the side of the bunk bed. The ladder can be placed on either the left or right side. Ensure the guardrails on the top bunk are securely installed.
Figure 4: Movable ladder for flexible placement.
Step 6: Install Anti-Tipping Kit
For added safety, install the anti-tipping kit by securing the bed frame to a wall stud. This prevents accidental tipping.
Figure 5: Rounded edges and anti-tipping kit installation.
Assembly Video Guides:
Video 1: Detailed assembly steps for the bunk bed frame.
Video 2: Assembly process for a heavy-duty bunk bed, demonstrating similar construction.
Video 3: Visual guide for assembling a full-size bunk bed.
5. Usage Guidelines
- Ensure all bolts and screws are tightened periodically to maintain stability.
- Do not allow more than one person on the top bunk at a time.
- Always use the ladder for climbing to and from the top bunk.
- Keep the area around the bunk bed clear of clutter to prevent falls.
- The bed can be separated into two individual full-size beds. Refer to the assembly instructions for guidance on separation and reassembly.
Figure 6: Low-profile bottom bunk for easy access.
6. Maintenance
- Wipe the metal frame with a dry cloth to remove dust and dirt.
- Avoid using harsh chemicals or abrasive cleaners, as these may damage the finish.
- Regularly inspect all connections and hardware for tightness. Tighten as needed.
7. Troubleshooting
- Wobbling: If the bed wobbles, check all bolts and screws to ensure they are securely tightened. Ensure the anti-tipping kit is properly installed.
- Squeaking: Tighten all connections. Applying a small amount of lubricant to metal-on-metal contact points may help.
- Missing Parts: If any parts are missing or damaged, please contact JOYMOR customer support immediately.
8. Specifications
- Brand: JOYMOR
- Model Number: MFBB1BK
- Size: Full over Full
- Color: Black
- Product Dimensions: 78"L x 61"W x 54"H
- Item Weight: 85 Pounds
- Weight Limit (per bunk): 350 Pounds
- Material: Metal (Reinforced Steel)
- Finish Type: Painted
- Special Features: Low Profile, No Box Spring Needed, Slatted, Space Saving Design
- Included Components: Guardrails, Headboard, Slat, Stairs
- Age Range: Child to Teen
Figure 7: Product dimensions and weight limits.
9. Warranty and Support
For warranty information, missing parts, or any product-related inquiries, please contact JOYMOR customer support. Keep your purchase receipt for warranty claims.
Contact Information: Refer to your purchase documentation or the JOYMOR official website for the most up-to-date customer service contact details.
