Introduction
This manual provides essential instructions for the safe and efficient operation of your Aprxuvot 0.4 Cuft Digital Security Safe Box. Please read this manual thoroughly before installation and use, and retain it for future reference. This safe is designed to protect your valuables with a digital combination lock and robust steel construction.
Safety Information
- Do not store emergency keys inside the safe. Keep them in a secure, separate location.
- Ensure the safe is securely mounted to a wall or floor to prevent unauthorized removal.
- Keep the safe away from excessive moisture or direct sunlight.
- This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof.
Package Contents
Verify that all items are present in the package:
- 1 x Safe Box
- 2 x Spare Keys
- 4 x Expansion Screws
- 1 x Mat
- 1 x User Manual (this document)
Setup
1. Battery Installation
The digital keypad requires batteries to function. Locate the battery compartment, typically on the inside of the safe door. Insert the required batteries (usually AA, not included) according to the polarity markings. Close the battery compartment securely.
2. Mounting the Safe
For enhanced security, it is recommended to mount the safe to a wall or floor using the provided expansion screws.
- Choose a suitable location for mounting.
- Mark the drilling points through the pre-drilled holes at the back or bottom of the safe.
- Drill pilot holes into the wall or floor at the marked locations.
- Align the safe with the drilled holes and insert the expansion screws.
- Tighten the screws firmly to secure the safe in place.
Operating Instructions
1. Initial Code Setup
Upon first use, the safe will have a default factory code (e.g., 159). It is crucial to change this immediately.
- With the door open, press the red reset button located on the inside of the door.
- Enter your desired new code (3-8 digits) on the keypad.
- Press the '#' button to confirm. The indicator light will confirm successful programming.
2. Opening the Safe (Digital Code)
- Enter your personal code on the digital keypad.
- Press the '#' button. The indicator light will turn green, and you will hear a beep.
- Within 5 seconds, turn the knob clockwise to open the safe door.
3. Opening the Safe (Emergency Key)
In case of forgotten code or dead batteries, use the emergency keys:
- Remove the cover plate over the keyhole, usually located near the knob.
- Insert the emergency key and turn it counter-clockwise.
- Simultaneously turn the main knob clockwise to open the door.
4. Locking the Safe
Close the safe door and turn the knob counter-clockwise to secure the locking bolts. The safe is now locked.
5. Alarm System and Mute Mode
- Anti-Tampering Alarm: If three consecutive incorrect codes are entered, the safe's alarm system will activate, emitting an audible alert. This deters unauthorized access.
- Mute Mode: To open the safe without sound, activate the mute mode. Refer to the specific instructions in your full manual for enabling/disabling this feature. This is useful for discreet access.
Storage and Removable Shelf
The safe includes a removable shelf to organize your items. You can adjust the internal space to accommodate different sized valuables.
- With Shelf: Ideal for documents, books, medicine, or passports.
- Without Shelf: Provides a larger single compartment for items like jewelry, watches, trophies, or cash.
Maintenance
1. Battery Replacement
When the battery power is low, the indicator light may flash red or the keypad may not respond. Replace all batteries with new ones of the same type. If the batteries are completely dead, use the emergency key to open the safe and then replace the batteries.
2. Cleaning
Clean the exterior of the safe with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
Troubleshooting
- Safe will not open with code: Ensure batteries are not depleted. Try using the emergency key. Re-enter the code carefully.
- Keypad is unresponsive: Replace batteries. If still unresponsive, contact customer support.
- Alarm activates unexpectedly: Check for any impact or tampering attempts. Ensure the safe is securely closed.
- Forgotten code: Use the emergency key to open the safe, then reset the code following the 'Initial Code Setup' instructions.
Specifications
| Feature | Detail |
|---|---|
| Brand | Aprxuvot |
| Product Dimensions | 12.2"D x 7.87"W x 7.87"H |
| Lock Type | Electronic Combination Lock, Key |
| Color | Black |
| Capacity | 0.4 Cubic Feet |
| Material | Alloy Steel |
| Special Features | Alarm System, Anti-Theft, Combination Lock, Removable Shelf, Sensor Light |
| Mounting Type | Wall / Floor Mount |
| Item Weight | 10.93 pounds |
| Model Number | safe box |
Warranty and Support
Your Aprxuvot Digital Security Safe Box comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Aprxuvot customer service through the retailer's platform or the contact information provided in your warranty documentation.