Product Overview
This manual provides instructions for the assembly, operation, and maintenance of your VASAGLE Bed Frame, Model RMB506GN01. This bed frame is designed for a 135 x 190 cm mattress and features an adjustable padded headboard, a robust metal frame, and wooden slats for support.
Image: The VASAGLE bed frame, slate grey with a golden decorative line on the headboard, shown assembled in a modern bedroom with white bedding and pillows.
Safety Information
- Handle all components with care, especially around sharp edges, to prevent injury.
- Do not exceed the maximum static load capacity of 1100 pounds (500 kg) to ensure stability and prevent damage.
- Ensure all screws and fasteners are securely tightened before use and periodically check for tightness.
- Keep small parts away from children during assembly.
Package Contents
Before assembly, verify that all components listed below are present and undamaged. Refer to the included parts list in your packaging for detailed identification.
- Headboard (Padded, Adjustable)
- Bed Frame Rails (Metal)
- Support Beam (Wood)
- Wooden Slats
- Legs (9 resistant legs)
- Assembly Hardware (Screws, bolts, tools)
Image: Square metal tubes representing the bed frame's robust metal construction.
Image: Stack of light-colored wooden slats, indicating the bed's slat support system.
Setup and Assembly
Assembly of the VASAGLE bed frame is designed to be straightforward. Follow the clear instructions and use the labeled parts provided in your package. It is recommended to assemble the bed frame with two people for ease and safety.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify all parts using the provided diagram and ensure all hardware is present.
- Begin by attaching the side rails to the headboard and footboard using the designated screws and tools.
- Install the central support beam and its legs, ensuring they are firmly secured.
- Place the wooden slats into the designated slots on the bed frame. Ensure the EVA foam pads are correctly positioned to reduce noise.
- Tighten all screws and bolts securely, but do not overtighten.
Image: An exploded diagram illustrating the robust and stable construction of the bed frame, highlighting 9 resistant legs and 10 wooden support slats.
Image: Detail of a wooden slat being inserted into the metal frame, showing the anti-noise EVA foam cushion.
Image: Close-up of one of the bed's sturdy legs, designed to minimize noise and protect flooring.
Operating Instructions
Adjusting the Headboard
The padded headboard of your VASAGLE bed frame is adjustable to accommodate different mattress thicknesses. It can be set to two different heights:
- Level 1: 110 cm height
- Level 2: 116.5 cm height
This adjustment allows the headboard to perfectly suit mattresses between 20 and 30 cm in thickness.
Image: A diagram illustrating the two adjustable height levels (110 cm and 116.5 cm) for the headboard, suitable for mattresses 20-30 cm thick.
Maintenance
- Cleaning the Fabric: For general cleaning, gently wipe the upholstered headboard and frame with a soft, damp cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Metal Frame Care: Wipe the metal parts with a dry or slightly damp cloth. Do not use abrasive materials that could scratch the finish.
- Regular Checks: Periodically inspect all bolts and screws to ensure they remain tight. Retighten if necessary to maintain stability and prevent squeaks.
- Floor Protection: The bed frame includes pads on the legs to protect your floor. Ensure these pads are intact and in place.
Troubleshooting
Noise Reduction
This bed frame is designed with features to minimize noise:
- An EVA foam cushion is integrated into the vertical beam to effectively reduce noise during use.
- Pads on the legs help minimize noise and protect your floor when the bed is moved.
If you experience persistent squeaking or noise, check the following:
- Ensure all assembly bolts and screws are tightened.
- Verify that the wooden slats are correctly seated in their holders and the EVA foam is in place.
- Check that the bed frame is on a level surface.
Image: Detail showing the double noise reduction features, including easy-to-install slats and an anti-noise EVA foam cushion on the vertical beam.
Specifications
| Feature | Detail |
|---|---|
| Model Number | RMB506GN01 |
| Brand | VASAGLE |
| Dimensions (L x W x H) | 192 x 135 x 116.5 cm |
| Compatible Mattress Size | 135 x 190 cm (Double) |
| Material | Steel, Linen-look Fabric, Trembling Poplar Wood, Foam |
| Color | Slate Grey |
| Special Features | Adjustable Padded Headboard (2 heights: 110/116.5 cm), Noise Reduction (EVA foam, leg pads) |
| Maximum Weight Recommendation | 1100 lbs (500 kg) |
| Assembly Required | Yes |
| Item Weight | 24.5 Kilograms |
| GTIN / UPC | 194343509938 |
Image: A detailed diagram showing the dimensions of the bed frame (192 x 135 x 110-116.5 cm) and its static load capacity of 500 kg.
Warranty and Support
For any questions, concerns, or assistance with your VASAGLE bed frame, please contact VASAGLE customer support. Refer to your purchase documentation for specific warranty details and contact information.
You can often find support contact details on the brand's official website or through the retailer where the product was purchased.
