Philips TAX5000

Philips TAX5000 Bluetooth Party Speaker Instruction Manual

Introduction

Thank you for purchasing the Philips TAX5000 Bluetooth Party Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read these instructions carefully before using the product.

What's in the Box

Verify that all components are present in the packaging:

Product Overview

The Philips TAX5000 is a portable party speaker designed for powerful audio output and dynamic lighting effects. It features dual 8-inch woofers and 2-inch tweeters, delivering 200W maximum sound output with Bass+ technology. The integrated RGB LED lightshow offers 13 modes. Connectivity options include Bluetooth, auxiliary input, and USB playback. For expanded audio, True Wireless Stereo (TWS) and Auracast multi-speaker connections are supported. The speaker also includes dual microphone inputs and a guitar input with independent volume and echo controls for karaoke and live performances. Its design incorporates wheels and a carry handle for portability, and it is IPX4 splash-resistant. A rechargeable battery provides up to 14 hours of playback.

Front view of the Philips TAX5000 Bluetooth Party Speaker with RGB lights active

Figure 1: Front view of the Philips TAX5000 speaker, showcasing the active RGB lightshow around the dual woofers.

Top control panel of the Philips TAX5000 Bluetooth Party Speaker

Figure 2: Top control panel of the speaker, showing buttons for microphone, echo, guitar, treble, bass, volume, light modes, Bluetooth, and power.

Setup

1. Charging the Speaker

Before initial use, fully charge the speaker. Connect the provided USB cable to the speaker's charging port and a suitable power adapter (not included). A full charge takes approximately 4 hours and provides up to 14 hours of playback. The battery pack is replaceable.

2. Powering On/Off

3. Bluetooth Pairing

  1. Ensure the speaker is powered on and in Bluetooth pairing mode (the Bluetooth indicator light will flash).
  2. On your mobile device, enable Bluetooth and search for available devices.
  3. Select "Philips TAX5000" from the list of devices.
  4. Once paired, the Bluetooth indicator light on the speaker will become solid.

Operating Instructions

1. Audio Playback

2. Lightshow Control

The speaker features an RGB LED lightshow with 13 dynamic modes. Use the dedicated Light button on the control panel to cycle through modes or turn the lights off. Further customization is available via the Philips Entertainment App.

3. Karaoke and Guitar Inputs

The speaker is equipped with two microphone inputs and one 6.3mm guitar input. Connect your microphones and/or guitar. Use the dedicated MIC, ECHO, GUITAR, TREBLE, and BASS knobs on the control panel to adjust levels and apply echo effects.

4. Multi-Speaker Connection (TWS & Auracast)

Side view of the Philips TAX5000 Bluetooth Party Speaker showing wheels

Figure 3: Side view of the speaker, highlighting the integrated wheels for easy transport.

Back view of the Philips TAX5000 Bluetooth Party Speaker showing the handle

Figure 4: Rear view of the speaker, illustrating the pull-out handle for portability.

Maintenance

To maintain your Philips TAX5000 speaker in optimal condition:

Troubleshooting

If you encounter issues with your speaker, refer to the following common solutions:

ProblemPossible Solution
Speaker does not power onEnsure the battery is charged or the speaker is connected to AC power. Press and hold the Power button.
No sound outputCheck volume levels on both the speaker and the connected device. Ensure the correct input source is selected. Re-pair Bluetooth if necessary.
Bluetooth pairing failsEnsure the speaker is in pairing mode. Move the speaker closer to your device. Turn off and on Bluetooth on your device. Clear previous pairings.
Microphone/Guitar not workingCheck connections. Adjust MIC/GUITAR volume knobs. Ensure microphones are powered on if applicable.

Specifications

FeatureDetail
Model NameTAX5000/37
Speaker TypePortable, Outdoor
Speaker Output Power200 Watts Max / 100 Watts RMS
Woofer Diameter8 Inches (x2)
Tweeter Diameter2 Inches (x2)
Connectivity TechnologyBluetooth, Auxiliary (3.5mm), USB
Wireless CommunicationBluetooth
Special FeaturesRGB Lightshow (13 modes), PA System, Portable with Wheels, Rechargeable Battery, TWS & Auracast Multi-Speaker, Dual Mic & Guitar Input, Karaoke
Battery LifeUp to 14 hours
Battery Recharge TimeApproximately 4 hours
Power SourcePlug In Electric (AC) / Rechargeable Battery
Control MethodApp, Touch Controls
IP RatingIPX4 Splash-Proof
Product Dimensions (D x W x H)12.6" x 12.6" x 28.74"
Item Weight39.7 pounds

Warranty

This Philips TAX5000 Bluetooth Party Speaker comes with a limited warranty. Please refer to the included Warranty Certificate for detailed terms, conditions, and registration information. Keep your proof of purchase for warranty claims.

Support

For further assistance, product updates, or detailed troubleshooting, please visit the official Philips support website or contact Philips customer service. Contact information can be found on the warranty certificate or the Philips website.

Product Videos

Philips TAX5000 Overview

This video provides a general overview of the Philips TAX5000 Bluetooth Party Speaker's features and capabilities.

Philips TAX5000 Features Highlight

A short video highlighting key features of the Philips TAX5000 speaker, such as its portability and lightshow.