1. Introduction
The Mifasol MF-JSQ-01-B Stainless Steel Warm Mist Humidifier is designed to improve your indoor air quality by releasing clean, warm steam. Unlike traditional ultrasonic humidifiers, this unit boils water to 212°F (100°C) to ensure 99.9% germ-free mist, making it ideal for bedrooms, nurseries, living rooms, and offices. It features a 3.3L (0.87 Gallon) capacity, adjustable mist levels, constant humidity settings, a sleep mode, and a timer for convenient and safe operation.
2. Important Safety Information
Please read all instructions carefully before using the humidifier. Keep this manual for future reference.
- Hot Steam Warning: This warm mist humidifier operates by heating water to a boil, producing steam. Avoid direct contact with the steam outlet to prevent burns.
- Initial Operation: After powering on, the humidifier enters standby mode. It will not start running immediately. Select a mist level or constant humidity mode to begin operation. Allow 15-30 minutes for the water to heat up and produce mist.
- Lid Safety: The humidifier features a double safety lock design. Ensure the lid is closed and pressed firmly until you hear a "click," then slide the external lid locking slider to the left to the lock position to secure it.
- Child Lock: Utilize the child lock feature to prevent accidental changes to settings or opening of the unit by children.
- Automatic Shut-off: The unit will automatically shut off when the water runs out, preventing potential damage or hazards.
- Water Type: Use tap water. No filter is required.
- Cleaning: Clean the water tank once a week for optimal performance and hygiene.
3. Package Contents
Ensure all items are present upon unboxing:
- Mifasol Warm Mist Humidifier Unit
- Stainless Steel Water Pot
- Inner Lid with Sealing Ring
- Power Cord
- User Manual (This Document)
4. Product Overview
Familiarize yourself with the components of your Mifasol humidifier.

Figure 4.1: Front view of the Mifasol Stainless Steel Warm Mist Humidifier.

Figure 4.2: Humidifier with the lid open, illustrating the removable stainless steel water pot and inner lid for easy cleaning.
Video 4.1: An overview of the Mifasol Healthy Steam Warm Mist Stainless Steel Humidifier, highlighting its features and operation.
5. Setup
Follow these steps for initial setup:
- Unpack: Carefully remove all components from the packaging.
- Placement: Place the humidifier on a flat, stable, and water-resistant surface, at least 13 inches away from walls and furniture.
- Unlock Lid: Slide the lid lock to the right to the unlock position. Press the open button to lift the top lid.
- Remove Inner Lid and Pot: Gently remove the inner lid, then lift out the stainless steel inner pot.
- Clean Components: Wash the inner lid and inner pot with water and a soft cloth or sponge. Ensure they are completely dry before reassembly.
- Reinstall Pot and Inner Lid: Place the dry inner pot back into the humidifier base. Reinstall the inner lid, ensuring the steam hole is properly aligned.
- Fill Water: Fill the inner pot with clean tap water. Do not exceed the MAX level mark indicated inside the pot.
- Close and Lock Lid: Close the top lid and press it firmly downward until you hear a "click." Slide the lid lock to the left to the lock position.
- Connect Power: Plug the power cord into a suitable electrical outlet.
Video 5.1: This video demonstrates the steps for setting up and using the Mifasol Stainless Steel Warm Mist Humidifier, including unlocking, filling, and basic operation.
6. Operating Instructions
Once set up, operate your humidifier using the control panel:
- Power On/Off: Press the power button (⏻) to turn the humidifier on or off. Note: After powering on, it will enter standby mode.
- Mist Level Adjustment: Press the mist button (💧) to cycle through three mist levels:
- Low (L): Approximately 300mL/h, runs for up to 9 hours.
- Medium (M): Approximately 500mL/h, runs for up to 7 hours.
- High (H): Approximately 800mL/h, runs for up to 4 hours.
Note: It takes 15-30 minutes for the water to boil and produce mist after activation.
- Constant Humidity Setting: Press the humidity button (%) to set a target humidity level: 50%, 60%, or 70%. The humidifier will automatically adjust output to maintain this level.
- Timer Function: Press the timer button (🕒) to set an operating time from 1 to 9 hours. The unit will automatically shut off when the set time expires.
- Sleep Mode: Press the sleep mode button (☾) to activate sleep mode. The display screen will turn off, except for the sleep indicator, to create an undisturbed environment. Tap any other button to wake up the display. For all-night operation, the low mist setting is recommended.
- Child Lock: Long press the child lock button (🔒) for 3 seconds to enable or disable this function. When enabled, other buttons will not respond to prevent accidental changes.

Figure 6.1: Illustration of the three adjustable mist output levels and their approximate runtimes.

Figure 6.2: The control panel displaying customizable constant humidity levels (50%, 60%, 70%).

Figure 6.3: The humidifier operating in sleep mode with timer function for a restful night.
7. Maintenance
Regular cleaning ensures optimal performance and extends the lifespan of your humidifier. Clean the water tank once a week.
- Power Off and Unplug: Always turn off the humidifier and unplug it from the power outlet before cleaning.
- Disassemble: Unlock and open the lid, remove the inner lid, and lift out the stainless steel inner pot.
- Empty Water: Carefully empty any remaining water from the inner pot.
- Clean Inner Pot: The food-grade 304 stainless steel inner pot is dishwasher safe. Alternatively, you can hand wash it with warm water and a soft cloth or sponge. For mineral buildup, soak the pot with distilled white vinegar or citric acid for 15-20 minutes, then scrub gently and rinse thoroughly until the vinegar smell is completely gone.
- Clean Inner Lid: Wash the inner lid and its sealing ring with warm water and a soft cloth or sponge. Ensure all parts are clean and dry.
- Clean Exterior: Wipe the exterior surface of the humidifier with a soft, damp cloth. If it is very dirty, use a neutral detergent. Do not immerse the main unit in water.
- Reassemble: Ensure all components are completely dry before reassembling. Place the inner pot back, then the inner lid (aligning the steam hole), and finally close and lock the top lid.
Video 7.1: This video provides a detailed guide on how to clean the Mifasol Stainless Steel Warm Mist Humidifier, including disassembling and cleaning the components.

Figure 7.1: The humidifier's design allows for hassle-free cleaning, with a dishwasher-safe stainless steel pot.
8. Troubleshooting
If you encounter issues with your humidifier, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No mist is being produced. | Humidifier is in standby mode; water not yet boiled; insufficient water. | Select a mist level or humidity setting. Allow 15-30 minutes for water to heat. Check water level and refill if necessary. |
| Unit does not turn on. | Not plugged in; power outage; lid not properly closed/locked. | Ensure power cord is securely plugged in. Check power supply. Ensure lid is closed and locked correctly (listen for "click" and slide lock). |
| Mist output is low. | Low mist setting selected; mineral buildup. | Increase mist level setting. Clean the inner pot and inner lid to remove mineral buildup. |
| Unusual odor. | Unit needs cleaning; old water. | Clean the humidifier thoroughly, especially the inner pot and lid. Replace water daily. |
| Child lock is active and buttons are unresponsive. | Child lock feature is enabled. | Long press the child lock button (🔒) for 3 seconds to disable it. |
If the problem persists after trying these solutions, please contact customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Mifasol |
| Model Name | Warm Steam Humidifier |
| Model Number | MF-JSQ-01-B |
| Capacity | 3.3 Liters (0.87 Gallons) |
| Floor Area Coverage | Up to 800 Square Feet |
| Operation Mode | Steam |
| Mist Levels | Low (300mL/h), Medium (500mL/h), High (800mL/h) |
| Runtime (Max) | Up to 9 hours (on Low mist setting) |
| Humidity Control | Adjustable (50%, 60%, 70%) |
| Timer | 1-9 hours |
| Special Features | Adjustable Humidity Control, Child Lock, Dishwasher Safe (pot), Removable Tank, Timer, Sleep Mode |
| Material | Plastic, Stainless Steel (304 food-grade) |
| Color | Black |
| Voltage | 120 Volts |
| Wattage | 800 watts |
| Item Dimensions (DxWxH) | 11"D x 10"W x 11"H |
| Item Weight | 5.17 Kilograms |
10. Warranty and Support
This Mifasol humidifier comes with a 1-Year Manufacturer Warranty. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Mifasol customer service through the retailer where you purchased the product or visit the official Mifasol website for contact information.
Please have your model number (MF-JSQ-01-B) and proof of purchase ready when contacting support.