1. Important Safety Instructions
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before using this heater.
- This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the heater and keep them away from the sides and rear.
- Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended.
- Always unplug heater when not in use.
- Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner. Discard heater, or return to authorized service facility for examination and/or repair.
- Do not use outdoors.
- This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate heater where it may fall into a bathtub or other water container.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
- To disconnect heater, turn controls to OFF, then remove plug from outlet.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
- A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable vapors or liquids are used or stored.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
- Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- This heater includes a tip-over safety switch and overheat protection for enhanced safety.
2. Product Overview
The PELONIS 30-inch Ceramic Tower Space Heater is designed to provide efficient and comfortable heating for indoor spaces. It features multiple heat settings, an adjustable thermostat, oscillation, and a convenient 24-hour timer, all controllable via a digital panel or remote control.

Figure 2.1: Front view of the PELONIS 30-inch Ceramic Tower Space Heater with its remote control.
Key Features:
- Rapid Heating: Utilizes 1500W PTC technology for quick warmth.
- Adjustable Thermostat: Allows precise temperature control in 1°F increments (in ECO mode).
- Multiple Heat Settings: Offers H1 (Low), H2 (Medium), H3 (High), ECO mode, and Fan Only mode.
- Wide Oscillation: 75° oscillation distributes heat evenly across rooms up to 300 sq.ft.
- 24-Hour Timer: Programmable timer for automatic shut-off.
- Remote Control: Convenient operation from a distance.
- Safety Features: Includes tip-over protection, overheat protection, enhanced safety plug, and V0 flame-retardant materials.
Included Components:
- PELONIS 30-Inch Ceramic Tower Space Heater
- Remote Control
- User Manual (this document)
3. Setup
- Unpacking: Carefully remove the heater and all accessories from the packaging. Retain packaging for future storage or transport.
- Placement: Place the heater on a firm, level surface. Ensure there is at least 3 feet (0.9 m) of clear space around the heater from any combustible materials (furniture, curtains, etc.). Do not place the heater on soft surfaces like rugs or carpets that may block air vents.
- Power Connection: Plug the heater directly into a 110V AC, 60Hz wall outlet. Do not use extension cords, power strips, or surge protectors. Ensure the outlet is not overloaded with other high-wattage appliances.
4. Operating Instructions
The heater can be operated using the control panel on top of the unit or the included remote control.
Control Panel and Remote Functions:

Figure 4.1: Display of various heating modes and fan-only option.
- Power Button (⏻): Press to turn the heater ON or OFF.
- Mode Button (M): Cycle through heating modes: H1 (Low), H2 (Medium), H3 (High), ECO, and Fan Only.
- Temperature Adjustment (+ / -): Adjust the desired temperature. In ECO mode, temperature can be set in 1°F increments between 41°F and 95°F.
- Oscillation Button (↻): Activate or deactivate the 75° oscillation function for wider heat distribution.
- Timer Button (⏱): Set the auto-off timer from 1 to 24 hours. Each press increases the timer by one hour.
Initial Operation:
- Plug the heater into a suitable electrical outlet.
- Press the Power button (⏻) to turn the heater on. The LED display will illuminate.
- Select your desired heating mode using the Mode button (M).
- Adjust the temperature using the + or - buttons.
- Activate oscillation if desired by pressing the Oscillation button (↻).
ECO Mode:
In ECO mode, the heater automatically adjusts its power consumption (between 600W, 900W, and 1500W) to maintain the set temperature, optimizing energy efficiency. This mode allows for precise temperature adjustments in 1°F increments.

Figure 4.2: ECO mode operation for energy efficiency.
24-Hour Timer:
The timer allows you to set a duration after which the heater will automatically turn off. This is useful for ensuring the heater does not run unnecessarily.

Figure 4.3: The heater features a 24-hour timer for convenience and quiet operation.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
Cleaning:
- Always unplug the heater and allow it to cool completely before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
- Gently vacuum the air intake and exhaust grilles to remove dust and lint. Do not allow water to drip into the heater's interior.
Storage:
- When not in use, store the heater in a cool, dry location.
- It is recommended to store the heater in its original packaging to protect it from dust and damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power to the unit; Tip-over switch activated; Overheat protection activated. | Ensure the heater is securely plugged into a working outlet. Check circuit breaker. Place the heater on a firm, level surface. Allow the heater to cool down for 10-15 minutes, then restart. |
| Heater produces insufficient heat. | Low heat setting selected; Thermostat set too low; Room size exceeds heating capacity. | Increase the heat setting (H1, H2, H3). Adjust the thermostat to a higher temperature. Ensure the heater is appropriate for the room size (up to 300 sq.ft.). |
| Heater stops unexpectedly. | Tip-over switch activated; Overheat protection activated; Timer function engaged. | Ensure the heater is upright on a stable surface. Allow the heater to cool down. Check if the timer is set for automatic shut-off. |
| Oscillation not working. | Oscillation function is turned off. | Press the Oscillation button (↻) on the control panel or remote to activate. |
7. Specifications
- Brand: PELONIS
- Model Number: PSHC30TD4BBV
- UPC: 810049712235
- Form Factor: Tower
- Color: Black
- Product Dimensions: 7.55"D x 7.55"W x 30"H
- Item Weight: 8.03 pounds
- Indoor/Outdoor Usage: Indoor
- Heating Coverage: Up to 300 sq.ft.
- Heat Output: 1500 Watts
- Fuel Type: Electric
- Number of Speeds: 4 (H1, H2, H3, ECO, Fan Only)
- Voltage: 110 Volts
- Amperage: 12.5 Amps
- Special Features: Adjustable Temperature, Fast Heating, On/Off Timer, Oscillating, Overheat Protection, Tip-Over Protection.
8. Warranty and Support
For warranty information, technical support, or customer service inquiries, please refer to the warranty card included with your product or visit the official PELONIS website. Keep your purchase receipt as proof of purchase.
You can visit the PELONIS store for more information: PELONIS Store on Amazon





