Introduction
Thank you for choosing the Aveek 2.4GHz Wireless Microphone V2. This manual provides detailed instructions for setting up, operating, and maintaining your wireless microphone system. Please read this manual carefully before use to ensure proper functionality and to maximize your user experience.
Package Contents
The Aveek Wireless Microphone V2 package typically includes the following items:
- 2 x Aveek Wireless Microphones
- 1 x 2.4GHz Wireless Receiver
- 1 x USB Charging Cable
- 1 x 6.35mm to 3.5mm Adapter
- 1 x User Manual
Image: Typical contents of the Aveek Wireless Microphone V2 package.
Product Overview
The Aveek Wireless Microphone V2 system features advanced DSP chips and a cardioid pickup pattern for clear sound. It operates on a stable 2.4GHz wireless transmission, offering a range of up to 30 meters (100 feet).
Image: Key features for high-fidelity vocal sound, including cardioid pickup and DSP noise reduction.
Setup Instructions
Follow these steps to set up your Aveek Wireless Microphone V2 system:
- Charge the Devices: Ensure both microphones and the receiver are fully charged using the provided USB charging cable. A full charge takes approximately 2-3 hours and provides over 12 hours of operation.
- Connect the Receiver: Plug the 2.4GHz wireless receiver into your audio device's 6.35mm microphone input. If your device has a 3.5mm input, use the included 6.35mm to 3.5mm adapter.
- Power On the Receiver: Press and hold the power button on the receiver until its indicator lights turn on.
- Power On the Microphones: Press and hold the power button on each microphone until its display screen illuminates. The microphones will automatically pair with the receiver.
- Adjust Volume: Adjust the volume on your audio device and the microphone as needed.
Image: Visual guide for the plug-and-play setup process.
Operating Instructions
Once set up, the Aveek Wireless Microphone V2 is ready for use:
- Usage: Speak or sing into the microphone. The 2.4GHz wireless technology ensures a stable connection up to 30 meters (100 feet) without latency.
- Power On/Off: Press and hold the power button on the microphone or receiver to turn them on or off.
- Battery Indicator: The microphone and receiver have indicators to show battery status. Recharge when the battery is low.
Image: Illustration of the 30-meter (100-foot) wireless transmission range.
Charging Instructions
The microphones and receiver are equipped with rechargeable batteries:
- Connect the USB charging cable to the charging port on the microphone or receiver.
- Plug the other end of the USB cable into a standard USB power adapter (not included) or a USB port on a computer.
- Charging time is approximately 2-3 hours for a full charge.
- A fully charged device provides over 12 hours of continuous operation.
Image: Charging setup for the microphones and receiver, highlighting battery duration.
Compatibility Notes
The Aveek Wireless Microphone V2 is designed for broad compatibility with audio devices:
- Compatible Devices: Works with audio devices featuring 6.35mm or 3.5mm microphone input jacks, such as karaoke machines, speakers, audio amplifiers, mixing consoles, and PA systems.
- Incompatible Devices: This system is not compatible with mobile phones, Bluetooth speakers, computers, tablets, or smart TVs directly. It does not support Bluetooth connectivity.
Image: Examples of compatible audio devices and connector types.
Image: Devices that are not compatible with the wireless microphone system.
Maintenance
To ensure the longevity and optimal performance of your Aveek Wireless Microphone V2, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the microphones and receiver. Avoid using liquid cleaners or abrasive materials.
- Storage: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For long-term storage, charge the batteries to about 50% every few months to prevent deep discharge.
- Handling: Handle the microphones and receiver with care to avoid dropping or physical damage.
Troubleshooting
If you encounter issues with your Aveek Wireless Microphone V2, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from microphone | Microphone or receiver not powered on; Low battery; Incorrect connection; Volume too low. | Ensure both devices are on; Charge batteries; Verify receiver is plugged into the correct input (6.35mm/3.5mm); Increase volume on audio device and microphone. |
| Sound is intermittent or distorted | Out of range; Interference; Low battery. | Move closer to the receiver (within 30m/100ft); Avoid obstacles; Charge batteries; Move away from other 2.4GHz devices. |
| Microphone not pairing | Receiver or microphone not in pairing mode; Interference. | Ensure both devices are powered on and within close proximity for initial pairing; Restart both devices. |
| Short battery life | Batteries not fully charged; Aging batteries. | Ensure full charge (2-3 hours); If issues persist, contact customer support. |
Specifications
| Model | V2 |
| Brand | Aveek |
| Connectivity Technology | 2.4GHz Wireless |
| Connector Type | 6.35mm / 3.5mm Jack |
| Special Feature | Noise Reduction (DSP Chip) |
| Wireless Range | Up to 30 meters (100 feet) |
| Battery Type | Rechargeable Lithium Ion (2 AA equivalent per microphone, included) |
| Charging Time | Approx. 2-3 hours |
| Operating Time | Over 12 hours |
| Product Weight | 640 g (approx. 1.4 lbs) |
| Package Dimensions | 31.6 x 17 x 5.9 cm (approx. 12.4 x 6.7 x 2.3 inches) |
| Country of Origin | China |
Safety Information
Please observe the following safety precautions:
- Do not expose the devices to water or excessive moisture.
- Avoid extreme temperatures and direct heat sources.
- Do not attempt to disassemble or modify the devices. This will void the warranty.
- Keep out of reach of children.
- Use only the provided charging cable.
Warranty and Support
Aveek products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Aveek website. Please retain your proof of purchase for warranty claims.
