Introduction
Thank you for choosing the HOYOVERSE Honkai: Star Rail Castorice Elite Gaming Controller. This high-performance wireless controller is designed to provide an immersive gaming experience across multiple platforms. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new controller.
Image: Front view of the Castorice Elite Gaming Controller, showcasing its purple and clear design with character art and an interactive screen.
Package Contents
Depending on your selected package (Selection A or Selection B), your product may include the following items:
- Custom-designed Controller
- Carrying Case
- Complimentary Metal Badge
- Connection Cable
- Wireless USB Receiver
- Joystick Protectors
- (Selection B only) Charging Dock
Image: Visual representation of the items included in Selection A (controller, case, badge, cable, receiver, protectors) and Selection B (adds charging dock).
Setup
1. Connectivity
The Castorice Elite Gaming Controller supports multiple connection methods:
- Wireless USB Receiver: For PC, PlayStation 5, and Xbox Series X, plug the included wireless USB receiver into an available USB port on your device. The controller will automatically attempt to connect.
- Bluetooth 2.4: For Android and iOS devices, enable Bluetooth on your device and search for available devices. Select the Castorice Elite Gaming Controller to pair.
- Wired Connection: Connect the controller directly to your PC or console using the provided connection cable for a stable, low-latency connection and charging.
2. Initial Pairing
To initiate pairing, ensure the controller is powered on. For wireless connections, press and hold the pairing button (refer to controller diagram for exact location, typically a small button on the top or back) until the indicator light flashes, signifying it is in pairing mode.
3. Software Installation (PC/Mobile)
For advanced customization, including button remapping, joystick calibration, and interactive screen settings, download the official HOYOVERSE controller software from the official website or your device's app store. Install and follow the on-screen instructions to configure your controller.
Operating the Controller
Key Features:
- Force Feedback Triggers: Experience enhanced immersion with ultra-precision force feedback servos and a micrometer-level gear structure, delivering varied tactile responses.
- Pivoting D-Pad 2.0: Designed for flawless combos and extended gaming sessions.
- Mecha-Tactile ABXY 2.0 Buttons: Provides crisp feedback and instant actuation for responsive gameplay.
- 6-Axis Motion Sensing: Offers pinpoint accuracy for precise in-game control.
- Force-Adjustable Alloy Joystick 2.0: Allows for ultra-wide force adjustment from 30gf (feather-light) to 100gf (bowstring-tight) for personalized control. Features smooth movement and no-drift return to center with alloy bearings.
- Asymmetrical Quick-Stop Motors: Delivers diverse haptics for sustained immersion with fast vibration starts and sharp cut-offs.
- LM+RM Buttons: Positioned for natural finger placement, enhancing control.
- M1+M2 & M3+M4 Buttons: Detachable and replaceable back buttons, offering comfort for both four-finger and six-finger placements.
Image: Detailed diagram highlighting the Pivoting D-Pad 2.0, Asymmetrical Quick-Stop Motors, Mecha-Tactile ABXY 2.0, 6-Axis Motion Sensing, Force-adjustable Alloy Joystick 2.0, Starlight Connection, and 1500mAh Battery.
Customization and Display:
- Full-Color Interactive Screen 2.0: Features a 150 FPS screen for mode switching and DIY animations.
- Wraparound RGB Light Strip: Multiple freely-customizable lighting effect modes.
- New-Gen Dot-Matrix Screen Dock: An RGB Dot-Matrix Screen with multi-function expansion and smart auto-wake capabilities.
Image: Close-up views detailing the Full-Color Interactive Screen 2.0, Wraparound RGB Light Strip, and the New-Gen Dot-Matrix Screen Dock.
Battery Life and Charging:
The controller is equipped with a 1500mAh battery, providing approximately a week of play on a single charge. To charge, connect the controller via the USB-C cable to a power source or place it on the optional charging dock (if included in your package).
Maintenance
- Cleaning: Do not clean the controller with water or expose it to corrosive or chemical liquids. Use a dry, soft cloth to wipe the surface. The textured rubber grips are designed to resist sweat and grime, making them easy to maintain.
- Storage: Keep the controller away from direct sunlight, heat sources, and open flames. Store it in a cool, dry place, preferably in its carrying case, when not in use.
- Protection: Avoid scratching the surface with metal objects or sharp implements to prevent damage and wear.
- Magnets: This device contains magnets that may interfere with implanted medical devices or personal medical equipment. Maintain at least 15cm distance from medical implants when using.
- Repairs: If the product becomes damaged, contact the manufacturer's authorized service personnel for repairs. Do not attempt to disassemble or repair the controller yourself to avoid safety hazards and voiding the warranty.
Troubleshooting
Common Issues and Solutions:
- Controller not connecting: Ensure the controller is charged. Verify the wireless USB receiver is properly inserted or Bluetooth is enabled and paired. Try restarting both the controller and the gaming device.
- Buttons unresponsive or registering multiple presses: This can sometimes occur due to software glitches or physical wear. Ensure your controller's firmware is up to date via the official software. If the issue persists, contact customer support.
- Input lag: Ensure you are within range of the wireless receiver or Bluetooth device. For critical gaming, consider using a wired connection.
- Charging issues: Verify the charging cable is securely connected to both the controller and the power source. If using the charging dock, ensure the controller is correctly seated.
If you encounter problems not listed here or if the suggested solutions do not resolve your issue, please refer to the Warranty and Support section for further assistance.
Specifications
Image: Infographic detailing the materials, dimensions, and power ratings for the controller and its accessories.
| Component | Detail |
|---|---|
| Controller Materials | Polycarbonate and Acrylonitrile Butadiene Styrene shell |
| Controller Dimensions | 5.9 x 4.1 x 2.6 in. (approx.) |
| Controller Rated Input | 5V ≈ 1000mA |
| Controller Rated Power | 0.25W |
| Controller Case Materials | Polyester, Ethylene-Vinyl Acetate, Nylon |
| Controller Case Dimensions | 6.7 x 5.7 x 3.5 in. (approx.) |
| Metal Badge Material | Zinc alloy with faux enamel finish and glitter accents |
| Metal Badge Dimensions | 2.6 x 2.5 in. (approx.) |
| Charging Dock Material | ABS |
| Charging Dock Dimensions | 4.4 x 3.9 x 4.0 in. (approx.) |
| Charging Dock Rated Input | 5V ≈ 2A |
| Connectivity Technology | Bluetooth 2.4, Wireless USB Receiver, Wired USB-C |
| Hardware Platform Compatibility | Android, iOS, PC/Mac, PlayStation 5, Xbox Series X |
| Button Quantity | 20 |
| Battery Capacity | 1500mAh |
Warranty and Support
The HOYOVERSE Honkai: Star Rail Castorice Elite Gaming Controller is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official HOYOVERSE website.
For technical support, warranty claims, or any product-related inquiries, please contact the HOYOVERSE customer support team. If you purchased the product from the HoYoverse Store on Amazon, you may also contact the seller directly for assistance.
Important Note: Warranty coverage may vary based on the point of purchase. Unauthorized disassembly or repair of the controller will void the warranty.
You can visit the official HOYOVERSE Store for more information and support resources: HOYOVERSE Store on Amazon