1. Introduction
Thank you for choosing the VASAGLE Kailyn Collection Nightstand. This modern bedside table features integrated power outlets, LED lighting, and convenient storage solutions. To ensure safe and proper use, please read this instruction manual thoroughly before assembly and operation. Keep this manual for future reference.
Important Safety Information:
- Caution: Do not exceed the maximum weight limit of 99 lb (45 kg) on the tabletop.
- Be careful when using the sliding lid to avoid pinch points.
- Ensure all connections for the power strip and LED lights are secure before use.
- Keep children away from small parts during assembly.
2. Package Contents
Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 1 x Bedside Table (ULET650WB01S)
- 1 x Accessory Kit (includes screws, dowels, drawer slides, handles, etc.)
- 1 x Power Strip (2 AC outlets, 1 USB-A port, 1 USB-C port, 1 USB-A port at rear)
- 1 x LED Light Strip with remote control
- 1 x Anti-Tip Kit
- 1 x Instruction Manual
3. Setup and Assembly Instructions
Follow the step-by-step instructions provided in the included accessory kit. A screwdriver is recommended for assembly. Ensure all connections are tight and stable.
Assembly Video Guide:
This video provides a visual guide for assembling the nightstand. Please refer to the written instructions for detailed steps and part identification.
Key Assembly Steps:
- Prepare Components: Lay out all numbered wooden boards and hardware.
- Assemble Frame: Connect the side panels to the base and top using the provided screws and dowels.
- Install Drawer Slides: Secure the drawer slides to the inner sides of the nightstand frame.
- Install Power Strip: Place the power strip into the designated slot under the sliding lid and secure it.
- Install LED Lights: Adhere the LED light strip to the specified groove. Connect it to the power strip.
- Assemble Drawers: Construct the two drawers and attach the handles.
- Insert Drawers: Carefully slide the assembled drawers into the installed slides.
- Attach Anti-Tip Kit: For safety, secure the nightstand to the wall using the anti-tip kit.
Figure 3.1: Product Dimensions and Drawer Sizes.
4. Operating Instructions
4.1 Power Outlets and USB Ports:
The nightstand features a hidden charging station with 2 AC outlets, 1 USB-A port, 1 USB-C port, and an additional USB-A port at the rear. To access, simply slide the lid on the tabletop. Plug your devices into the appropriate ports for charging. Ensure the nightstand is plugged into a wall outlet.
Figure 4.1: Hidden Charging Station with Power Outlets and USB Ports.
4.2 LED Lights:
The integrated LED light strip offers over 29 colors and multiple modes, adjustable via a mobile app or the included remote control. Connect the LED light strip to the power strip. Refer to the LED light controller's specific instructions for pairing with the mobile app and using the remote control functions (e.g., color selection, brightness, dynamic modes).
Figure 4.2: Adjustable LED Light Features.
5. Maintenance
To maintain the appearance and longevity of your nightstand, follow these simple guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Clean up spills immediately to prevent staining or damage to the particleboard and MDF.
- LED Lights: If the LED lights stop working, check the connection to the power strip and ensure the remote control batteries are functional.
- Power Strip: Periodically check the power strip for any signs of wear or damage. Discontinue use if damaged.
6. Troubleshooting
If you encounter any issues with your nightstand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights not working | Loose connection, remote battery dead, power strip off | Check all cable connections, replace remote battery, ensure power strip is on. |
| Devices not charging | Nightstand not plugged in, power strip off, faulty cable | Ensure nightstand is plugged into a wall outlet, check power strip switch, try a different charging cable. |
| Drawers stick or do not slide smoothly | Improper installation of slides, debris in tracks | Recheck drawer slide installation, clean tracks of any obstructions. |
| Nightstand feels wobbly | Loose screws, uneven floor | Tighten all assembly screws. Use furniture pads or shims to level on uneven floors. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | VASAGLE |
| Model Number | ULET650WB01S |
| Product Dimensions (D x W x H) | 15.7" x 18.9" x 26.8" (40 cm x 48 cm x 68 cm) |
| Item Weight | 38.7 Pounds (17.55 kg) |
| Maximum Weight Recommendation (Tabletop) | 99 Pounds (45 kg) |
| Frame Material | Particleboard, MDF (Medium Density Fiberboard) |
| Color | Cloud White |
| Number of Drawers | 2 |
| Power Outlets | 2 AC outlets |
| USB Ports | 1 USB-A, 1 USB-C (front), 1 USB-A (rear) |
| LED Lights | RGB, 29+ colors, multiple modes (app/remote controlled) |
| Required Assembly | Yes |
| Included Components | Bedside Table, Accessory Kit, Instructions |
8. Warranty & Support
For warranty information, product support, or to purchase replacement parts, please refer to the contact information provided on the packaging or visit the official VASAGLE website. Keep your purchase receipt for warranty claims.
