VECELO Queen Size Upholstered Bed Frame User Manual

Important Safety Information

Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in injury or damage.

• Do not exceed the maximum weight capacity of 800 pounds for this bed frame.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Keep small parts away from children during assembly to prevent choking hazards.
• Assemble the bed frame on a soft, clean surface (like a carpet) to prevent scratching the product or your floor.
• This product is intended for indoor use only.
• Avoid using abrasive cleaners or harsh chemicals on the velvet fabric or metal frame.

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact VECELO customer support.

• Headboard (Upholstered with LED lights and charging ports)
• Side Rails (Left and Right)
• Footboard
• Center Support Beam(s)
• Wooden Slats (with Velcro strips)
• Support Legs (for frame and center beam)
• Assembly Hardware (screws, bolts, washers, Allen wrench)
• LED Remote Control
• Instruction Manual

Image: Overview of bed frame components and dimensions.

Setup and Assembly

Assembly of the VECELO Queen Size Bed Frame is designed to be straightforward. Most screws are pre-installed for convenience. It is recommended to have two people for assembly.

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface. Refer to the "Package Contents" section and the included parts list to ensure everything is present.
2. Attach Side Rails to Headboard: Connect the side rails to the headboard using the provided bolts and Allen wrench. Do not fully tighten bolts until the entire frame is assembled.
3. Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard. Ensure proper alignment before partially tightening bolts.
4. Install Center Support Beam: Place the center support beam(s) into the designated slots or brackets on the headboard and footboard. Attach any required support legs to the center beam.
5. Secure Wooden Slats: Lay the wooden slats across the bed frame. The slats feature Velcro strips for secure attachment to the frame, preventing movement and reducing noise. Ensure slats are evenly spaced.
6. Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws using the Allen wrench.
7. Connect Power: Plug the power adapter for the LED lights and charging ports into a wall outlet.

Image: Details of the bed frame's construction, including Velcro strips, wooden slats, and metal frame.

Operating Instructions

LED Headboard Lighting

The upholstered headboard features integrated LED lighting with various customization options.

• Control Methods: The LED lights can be controlled via the included remote control or a dedicated smartphone application. Refer to the separate LED light manual for app download and pairing instructions.
• Color Options: Choose from over 16 million colors to match your mood or room decor.
• Lighting Effects: Access more than 20 preset lighting effects, including brightness adjustments, flashing patterns, and wave effects.
• Dynamic Modes:
  • Music Mode: Lights synchronize with music played through your device's microphone or the app.
  • Microphone Mode: Lights react to ambient sounds detected by the microphone.
  • Timer Mode: Set schedules for the lights to turn on or off automatically.

Image: LED headboard lights syncing to music, controlled by app or remote.

Image: RGB LED lighting display with app control showing music, mic, and timing modes.

USB Charging Ports

The headboard includes built-in USB-A and Type-C charging ports for convenient device charging.

• Usage: Simply plug your compatible USB-A or Type-C charging cable into the respective port on the headboard.
• Power: The charging ports are powered when the bed frame is connected to a wall outlet.
• Compatibility: Compatible with most smartphones, tablets, and other USB-powered devices.

Image: USB-A and Type-C charging ports located on the headboard.

Adjustable Headboard

The headboard height can be adjusted to accommodate different mattress thicknesses.

• Adjustment Levels: The headboard offers three adjustable height settings: 43.6 inches, 45.6 inches, and 47.6 inches (from the floor).
• Mattress Compatibility: These settings are ideal for mattresses with thicknesses of 8, 10, and 12 inches, respectively.
• How to Adjust: Adjustment typically involves re-positioning the headboard attachment points during assembly or by loosening and re-tightening specific bolts. Refer to the detailed assembly guide for precise steps.

Image: Adjustable headboard heights and recommended mattress thicknesses.

Maintenance

Proper care and maintenance will extend the life and appearance of your VECELO bed frame.

• Velvet Fabric: For general cleaning, gently vacuum the velvet upholstery with a brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For deeper cleaning, professional dry cleaning is recommended. Avoid harsh chemicals or excessive moisture.
• Metal Frame: Wipe the metal frame with a soft, damp cloth. Dry immediately to prevent rust. Avoid abrasive cleaners.
• Slats and Connections: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain stability and prevent noise.
• LED Lights: The LED lights are designed for long-term use and generally require no maintenance. If issues arise, refer to the troubleshooting section.

Troubleshooting

If you encounter any issues with your bed frame, refer to the following common problems and solutions.

Specifications

Image: Under-bed space measurement.

Warranty and Support

VECELO is committed to providing high-quality products. For specific warranty information, please refer to the documentation included with your purchase or visit the official VECELO website.

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact VECELO customer support:

• Customer Service: Refer to your purchase receipt or the VECELO brand store for contact details.
• Online Support: Visit the VECELO Store on Amazon for FAQs and additional product information.