iPhoenix IP-190 Skull Portable Bluetooth Speaker User Manual

Introduction

Thank you for choosing the iPhoenix IP-190 Skull Portable Bluetooth Speaker. This speaker combines a unique design with powerful audio performance, LED lighting, and robust features like TWS pairing and water resistance. This manual provides essential information for safe operation, setup, and maintenance of your device. Please read it thoroughly before use.

Image: The iPhoenix IP-190 Skull Portable Bluetooth Speaker, showcasing its unique design and LED ring.

Safety Information

To ensure safe and optimal performance, please observe the following safety guidelines:

Do not expose the speaker to extreme temperatures, direct sunlight, or open flames.
Avoid dropping or subjecting the speaker to severe impacts.
Do not disassemble, repair, or modify the device yourself. Contact qualified service personnel for assistance.
Keep the speaker away from medical devices, as it contains magnets.
Use only the specified charging cable and power adapter.
Ensure all ports are securely closed when using the speaker near water to maintain its water resistance (IPX6 rating).

Package Contents

Verify that all items are present in the package:

iPhoenix IP-190 Skull Portable Bluetooth Speaker
USB Charging Cable
User Manual

Product Overview

Familiarize yourself with the speaker's controls and features:

Power Button: Press and hold to turn on/off. Short press for play/pause.
Volume Up (+): Short press to increase volume. Long press for next track.
Volume Down (-): Short press to decrease volume. Long press for previous track.
Mode/LED Button: Short press to change LED light modes. Long press to switch between Bluetooth/Aux modes (if applicable).
Charging Port: USB-C or Micro-USB (refer to actual product).
LED Indicator: Shows charging status and Bluetooth connection.
Carrying Strap: For portability.

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator will show charging status (e.g., red while charging, off when fully charged).

A full charge provides up to 8 hours of playback time.

2. Power On/Off

To Power On: Press and hold the Power button for approximately 3 seconds until you hear an audible prompt and the LED indicator lights up.
To Power Off: Press and hold the Power button for approximately 3 seconds until you hear an audible prompt and the LED indicator turns off.

3. Bluetooth Pairing

To connect your speaker to a Bluetooth-enabled device:

Ensure the speaker is powered on and in Bluetooth pairing mode (the LED indicator will typically flash blue rapidly).
On your device (smartphone, tablet, etc.), go to the Bluetooth settings and enable Bluetooth.
Search for available devices. Select "IP-190" from the list.
Once connected, the LED indicator will turn solid blue, and you will hear a confirmation sound.

The speaker will automatically attempt to reconnect to the last paired device when powered on.

4. TWS (True Wireless Stereo) Pairing

For an immersive stereo experience, you can pair two IP-190 speakers together:

Ensure both IP-190 speakers are powered on and not connected to any other Bluetooth device.
On one of the speakers (this will be the primary speaker), double-press the Power button (or a dedicated TWS button if available, refer to product for exact control). You will hear a prompt indicating TWS pairing mode.
The two speakers will automatically search for and connect to each other. Once paired, you will hear a confirmation sound, and the LED indicators on both speakers will change to indicate a successful TWS connection.
Now, connect your device to the primary speaker via Bluetooth as described in step 3. The primary speaker's name will appear in your device's Bluetooth list.

Once TWS paired, both speakers will function as a single stereo unit. To disconnect TWS, double-press the Power button on either speaker.

Operating Instructions

1. Music Playback

Play/Pause: Short press the Power button.
Volume Up: Short press the '+' button.
Volume Down: Short press the '-' button.
Next Track: Long press the '+' button.
Previous Track: Long press the '-' button.

2. Call Handling

When connected to a smartphone, the speaker can be used for hands-free calls:

Answer Call: Short press the Power button when an incoming call rings.
End Call: Short press the Power button during a call.
Reject Call: Long press the Power button when an incoming call rings.

3. LED Light Modes

The IP-190 features dynamic LED lights. Short press the Mode/LED button to cycle through different light modes or to turn the lights off.

iPhoenix IP-190 Skull Speaker with LED lights in a party setting

Image: The iPhoenix IP-190 speaker illuminating a vibrant party atmosphere with its LED lights.

Maintenance

Cleaning: Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Storage: Store the speaker in a cool, dry place away from direct sunlight when not in use for extended periods.
Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use.
Water Resistance: Always ensure the charging port cover is securely closed to maintain the IPX6 water resistance rating. Do not submerge the speaker.

iPhoenix IP-190 Skull Speaker resisting water splashes

Image: The iPhoenix IP-190 speaker demonstrating its water resistance against splashes.

Troubleshooting

Problem	Possible Solution
Speaker does not power on.	Ensure the battery is charged. Connect the speaker to a power source and try again.
Cannot pair via Bluetooth.	Ensure the speaker is in pairing mode (flashing blue LED). Make sure Bluetooth is enabled on your device. Move the speaker closer to your device (within 10 meters/33 feet). Forget "IP-190" from your device's Bluetooth list and try pairing again. Restart both the speaker and your device.
No sound or low volume.	Increase the volume on both the speaker and your connected device. Ensure the speaker is properly connected via Bluetooth. Check if the audio source is playing.
TWS pairing fails.	Ensure both speakers are IP-190 models and are not connected to any other Bluetooth device. Place the speakers close to each other during TWS pairing. Try resetting both speakers and repeating the TWS pairing process.

Specifications

Model Name	IP-190 (IP-IP190-SKULL)
Brand	iPhoenix
Connectivity Technology	Bluetooth
Bluetooth Range	Up to 10 meters (33 feet)
Max Speaker Output Power	20 Watts
Audio Output Mode	Stereo
Speaker Type	Portable
Housing Material	Plastic
Water Resistance Level	IPX6 (Resistant to high-pressure water jets)
Power Source	Battery (1 non-standard battery required)
Battery Life	Up to 8 hours
Control Method	Tactile Buttons
Other Features	LED Light, TWS Pairing, MP3 Player
Compatible Devices	Smartphone
Item Dimensions (D x W x H)	10.2 x 9.7 x 12.7 cm (4.0 x 3.8 x 5.0 inches)
Item Weight	0.54 kg (1.2 Pounds)
Color	Black - (Skull Design)
GTIN/UPC	652805874333

iPhoenix IP-190 Skull Speaker with dimensions indicated

Image: The iPhoenix IP-190 speaker with its approximate dimensions shown.

Warranty Information

iPhoenix products are covered by a limited warranty from the date of purchase. Please refer to the warranty card included in your package or visit the official iPhoenix website for detailed warranty terms and conditions. This warranty typically covers manufacturing defects but does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Support

If you encounter any issues or have questions regarding your iPhoenix IP-190 Skull Portable Bluetooth Speaker, please contact our customer support team. You can find contact information on the official iPhoenix website or through your retailer's support channels.

For the latest updates, FAQs, and support resources, please visit: www.iphoenix.com (Note: This is a placeholder URL. Please refer to your product packaging for the actual support website.)

iPhoenix IP-190