Aroepurt Phone Case for Maze Speed M65P, M65, M6561 with Tempered Glass Screen Protector Instruction Manual

Introduction

This manual provides instructions for the proper installation, usage, and maintenance of your Aroepurt phone case and tempered glass screen protector for Maze Speed M65P, M65, and M6561 models. Please read these instructions carefully before use to ensure optimal performance and protection for your device.

Package Contents

Verify that all items are present in the package:

• 1 x Phone Case (Hard PC back panel + Soft Silicone frame)
• 1 x Tempered Glass Screen Protector
• 1 x Adhesive Metal Finger Ring Support (can be attached to case or used separately)

Setup and Installation

1. Phone Case Installation

1. Ensure your phone is clean and free of dust or debris.
2. Align the phone with the soft silicone frame of the case.
3. Gently press the phone into the case, starting from one corner and working your way around until the phone is fully seated.
4. Verify that all buttons and ports are accessible and aligned correctly.

2. Tempered Glass Screen Protector Installation

For optimal adhesion, install the screen protector in a dust-free environment.

1. Clean your phone screen thoroughly using the provided cleaning wipes (if included) or a microfiber cloth. Ensure no dust, smudges, or fingerprints remain.
2. Carefully peel off the protective film from the adhesive side of the tempered glass. Avoid touching the adhesive surface.
3. Align the screen protector precisely with your phone's screen, paying attention to cutouts for the speaker and camera.
4. Once aligned, gently lower the screen protector onto the screen. It will begin to adhere automatically.
5. Use a clean cloth or your finger to gently press out any air bubbles from the center outwards.

Figure 1: Tempered Glass Screen Protector Features. This image illustrates the protective qualities of the screen protector, including 9H hardness, shatterproof design, perfect adhesion, case compatibility, high transparency, and anti-fingerprint properties.

Figure 2: Tempered Glass Scratch Resistance. This image shows the screen protector's ability to resist scratches and impacts, even from sharp objects like a hammer.

3. Ring Holder Attachment

The adhesive metal finger ring support can be attached to the back of the phone case or used separately.

1. Clean the desired attachment area on the back of the phone case.
2. Peel off the protective film from the adhesive side of the ring holder.
3. Press the ring holder firmly onto the case for at least 30 seconds. Allow 24 hours for the adhesive to fully cure before heavy use.

Features and Usage

1. Shockproof Design

The case features a 2-in-1 design combining a hard PC back panel with a soft silicone frame. Reinforced corners with shock airbags provide enhanced protection against drops and impacts.

Figure 3: Shockproof Protection. This image highlights the case's shock-absorbing features, including the combination of hard PC and soft silicone, four-corner thickening, and integrated shock airbags.

2. Luminous Effect

The case incorporates a special process layer that absorbs light and sunlight. In dark environments, this absorbed light is emitted, creating a fluorescent effect. The back panel consists of four layers: solid PC, an ultra-high definition pattern layer, a special process layer for luminosity, and a clear, scratch-resistant surface layer.

Figure 4: Luminous Effect and Layered Construction. This image demonstrates how the case absorbs light to glow in the dark and details the multi-layer structure of the back panel, including the light-absorbing layer and ultra HD print.

3. Ring Holder Functionality

The integrated metal finger ring support offers multiple functionalities:

• Enhanced Grip: Insert your finger through the ring for a secure hold, reducing the risk of accidental drops.
• One-Hand Operation: The ring allows for extended reach across the screen, facilitating easier one-hand use of your device.
• Kickstand Function: Rotate the ring to position your phone at a comfortable viewing angle for media consumption. The ring rotates 360 degrees and pivots 180 degrees for versatile positioning.

Figure 5: One-Hand Operation with Ring Holder. This image illustrates how the ring holder improves accessibility for one-handed use of the phone.

Figure 6: Ring Holder Rotation and Magnetic Compatibility. This image displays the ring holder's full range of motion (180° pivot, 360° rotation) and its ability to attach to magnetic car mounts. Note: Magnetic car mount is not included.

4. Magnetic Car Mount Compatibility

The metal ring support is designed to be compatible with magnetic car mounts, allowing for convenient hands-free use in your vehicle. Please note that a magnetic car mount is not included with this product. Wireless charging may not be supported when the ring holder is attached or when using a magnetic car mount.

5. Enhanced Protection

The case design includes raised edges around the camera and screen, providing additional protection when the phone is placed on flat surfaces.

Maintenance

Cleaning the Phone Case

To clean the phone case, gently wipe it with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the case's finish or luminous properties.

Cleaning the Screen Protector

Wipe the screen protector with a microfiber cloth to remove fingerprints and smudges. For stubborn marks, lightly dampen the cloth with water or a screen cleaner designed for electronics.

Troubleshooting

• Screen Protector Bubbles: If bubbles appear after installation, gently lift the nearest edge of the protector and reapply, pushing the air out with a clean cloth. Small bubbles may disappear naturally within 24-48 hours.
• Ring Holder Adhesion: Ensure the surface of the case is clean and dry before attaching the ring holder. Apply firm pressure for 30 seconds and allow 24 hours for the adhesive to fully bond.
• Luminous Effect Not Visible: The luminous effect requires exposure to light (natural or artificial) to charge. Ensure the case is exposed to light for a period before expecting it to glow in the dark.

Specifications

Warranty Information

Specific warranty details for this product are not provided in the available information. Please refer to the retailer's return policy or contact the manufacturer directly for warranty inquiries.

Customer Support

For further assistance or questions regarding your Aroepurt phone case, please contact the seller or manufacturer through the platform where the product was purchased. Keep your purchase receipt or order number handy for faster service.